Tensile Test Design to Measure Interlayer Adhesion in Investment Casting Shells for Spalling Mitigation

We designed a tensile test fixture for a 112 lbf capacity Instron load frame that imparts a normal force on the face of a button epoxied to an investment casting shell sample, delaminating the shell area attached to the button. Using a green standard shell (Group 1), a partially fired standard shell (Group 2), and a green shell with a different third coat (Group 3), we verified that the fixture can measure differences in strength between sample groups. We attached steel buttons to leveled samples with 0.05 mL of Hysol-Loctite 9340 epoxy, let it cure for 48 hours, and tested them at 0.05 in./min. Most shells failed below the face coat, instead of spalling. Groups 1 and 2 failed in a backup layer, or at the larger stucco beneath it (0.035-0.044″ deep). Group 3 failed in the face coat (0.010″), flat in a backup layer (0.033″), or in rounded craters through several layers (0.064″). We measured fracture areas in Photoshop to calculate failure stresses, which averaged 116.21 psi for Group 1, 179.42 psi for Group 2, and 141.99 psi for Group 3, with respective standard deviations of 21.78 psi, 30.84 psi, and 31.21 psi. Two-sample t-tests showed statistically valid distinctions between each group’s results, indicating that this fixture could be used to further investigate designing a stronger shell to mitigate face coat spalling

An Agent-Based Model of Signal Transduction in Bacterial Chemotaxis

We report the application of agent-based modeling to examine the signal transduction network and receptor arrays for chemotaxis in Escherichia coli, which are responsible for regulating swimming behavior in response to environmental stimuli. Agent-based modeling is a stochastic and bottom-up approach, where individual components of the modeled system are explicitly represented, and bulk properties emerge from their movement and interactions. We present the Chemoscape model: a collection of agents representing both fixed membrane-embedded and mobile cytoplasmic proteins, each governed by a set of rules representing knowledge or hypotheses about their function. When the agents were placed in a simulated cellular space and then allowed to move and interact stochastically, the model exhibited many properties similar to the biological system including adaptation, high signal gain, and wide dynamic range. We found the agent based modeling approach to be both powerful and intuitive for testing hypotheses about biological properties such as self-assembly, the non-linear dynamics that occur through cooperative protein interactions, and non-uniform distributions of proteins in the cell. We applied the model to explore the role of receptor type, geometry and cooperativity in the signal gain and dynamic range of the chemotactic response to environmental stimuli. The model provided substantial qualitative evidence that the dynamic range of chemotactic response can be traced to both the heterogeneity of receptor types present, and the modulation of their cooperativity by their methylation state

Toward Solution of Matrix Equation X=Af(X)B+C

This paper studies the solvability, existence of unique solution, closed-form solution and numerical solution of matrix equation $X=Af(X) B+C$ with $f(X) =X^{\mathrm{T}},$ $f(X) =\bar{X}$ and $f(X) =X^{\mathrm{H}},$ where $X$ is the unknown. It is proven that the solvability of these equations is equivalent to the solvability of some auxiliary standard Stein equations in the form of $W=\mathcal{A}W\mathcal{B}+\mathcal{C}$ where the dimensions of the coefficient matrices $\mathcal{A},\mathcal{B}$ and $\mathcal{C}$ are the same as those of the original equation. Closed-form solutions of equation $X=Af(X) B+C$ can then be obtained by utilizing standard results on the standard Stein equation. On the other hand, some generalized Stein iterations and accelerated Stein iterations are proposed to obtain numerical solutions of equation equation $X=Af(X) B+C$. Necessary and sufficient conditions are established to guarantee the convergence of the iterations

A vertex centred Finite Volume Jameson-Schmidt-Turkel (JST) algorithm for a mixed conservation formulation in solid dynamics

A vertex centred Finite Volume algorithm is presented for the numerical simulation of fast transient dynamics problems involving large deformations. A mixed formulation based upon the use of the linear momentum, the deformation gradient tensor and the total energy as conservation variables is discretised in space using linear triangles and tetrahedra in two-dimensional and three-dimensional computations, respectively. The scheme is implemented using central differences for the evaluation of the interface fluxes in conjunction with the Jameson-Schmidt-Turkel (JST) artificial dissipation term. The discretisation in time is performed by using a Total Variational Diminishing (TVD) two-stage Runge-Kutta time integrator. The JST algorithm is adapted in order to ensure the preservation of linear and angular momenta. The framework results in a low order computationally efficient solver for solid dynamics, which proves to be very competitive in nearly incompressible scenarios and bending dominated applications

Corporate social responsibility as cultural meaning management: a critique of the marketing of ‘ethical’ bottled water

To date, the primary focus of research in the field of corporate social responsibility (CSR) has been on the strategic implications of CSR for corporations and less on an evaluation of CSR from a wider political, economic and social perspective. In this paper, we aim to address this gap by critically engaging with marketing campaigns of so-called ‘ethical’ bottled water. We especially focus on a major CSR strategy of a range of different companies that promise to provide drinking water for (what they name as) ‘poor African people’ by way of Western consumers purchasing bottled water. Following Fairclough's approach, we unfold a three-step critical discourse analysis of the marketing campaigns of 10 such ‘ethical’ brands. Our results show that bottled water companies try to influence consumers' tastes through the management of the cultural meaning of bottled water, producing a more ‘ethical’ and ‘socially responsible’ perception of their products/brands. Theoretically, we base our analysis on McCracken's model of the cultural meaning of consumer goods, which, we argue, offers a critical perspective of the recent emergence of CSR and business ethics initiatives. We discuss how these marketing campaigns can be framed as historical struggles associated with neo-liberal ideology and hegemony. Our analysis demonstrates how such CSR strategies are part of a general process of the reproduction of capitalist modes of accumulation and legitimation through the usage of cultural categories

Empirical evidence for unique hues?

Red, green, blue, yellow, and white have been distinguished from other hues as unique. We present results from two experiments that undermine existing behavioral evidence to separate the unique hues from other colors. In Experiment 1 we used hue scaling, which has often been used to support the existence of unique hues, but has never been attempted with a set of non-unique primaries. Subjects were assigned to one of two experimental conditions. In the "unique" condition, they rated the proportions of red, yellow, blue, and green that they perceived in each of a series of test stimuli. In the "intermediate" condition, they rated the proportions of teal, purple, orange, and lime. We found, surprisingly, that results from the two conditions were largely equivalent. In Experiment 2, we investigated the effect of instruction on subjects' settings of unique hues. We found that altering the color terms given in the instructions to include intermediate hues led to significant shifts in the hue that subjects identified as unique. The results of both experiments question subjects' abilities to identify certain hues as unique

Aircraft computations using multigrid and an unstructured parallel library

This paper examines the application of unstructured multigrid, using a sequence of independent tetrahedral grids. The test cases examined are for inviscid flow over an aircraft and an M6 wing. The sensitivity of the method to grid sequence and cycling strategy are investigated. \ud \ud All of the calculations were performed on a parallel computer. This was achieved by using the OPlus library which, by the straightforward insertion of subroutine calls, facilitates parallelisation of the resulting code. A single source OPlus application code can be compiled to executed on either a parallel or sequential machine. This greatly increases the usability of the parallel machine, and the maintainability of the code

Astrometric and photometric initial mass functions from the UKIDSS Galactic Clusters Survey: I The Pleiades

We present the results of a deep wide-field near-infrared survey of the entire Pleiades cluster recently released as part of the UKIRT Infrared Deep Sky (UKIDSS) Galactic Clusters Survey (GCS) Data Release 9 (DR9). We have identified a sample of ~1000 Pleiades cluster member candidates combining photometry in five near-infrared passbands and proper motions derived from the multiple epochs provided by the UKIDSS GCS DR9. We also provide revised membership for all previously published Pleiades low-mass stars and brown dwarfs in the past decade recovered in the UKIDSS GCS DR9 Pleiades survey based on the new photometry and astrometry provided by the GCS. We find no evidence of K-band variability in the Pleiades members larger than ~0.08 mag. In addition, we infer a substellar binary frequency of 22-31% in the 0.075-0.03 Msun range for separations less than ~100 au. We employed two independent but complementary methods to derive the cluster luminosity and mass functions: a probabilistic analysis and a more standard approach consisting of stricter astrometric and photometric cuts. We found that the resulting luminosity and mass functions obtained from both methods are very similar. We derive the Pleiades mass function in the 0.6-0.03 Msun mass range and found that it is best reproduced by a log-normal representation with a mean characteristic mass of 0.24(+0.01-0.03) Msun, in agreement with earlier studies and the extrapolation of the field mass function.Comment: MNRAS, in press: 17 pages, 11 figures, 4 tables in main text, 4 additional tables in appendix. Abstract and column names in Tables 3 and 4 corrected compared to MNRAS's accepted versio

Neptunism and transformism:Robert Jameson and other evolutionary theorists in early nineteenth-century Scotland

This paper sheds new light on the prevalence of evolutionary ideas in Scotland in the early nineteenth century and establish what connections existed between the espousal of evolutionary theories and adherence to the directional history of the earth proposed by Abraham Gottlob Werner and his Scottish disciples. A possible connection between Wernerian geology and theories of the transmutation of species in Edinburgh in the period when Charles Darwin was a medical student in the city was suggested in an important 1991 paper by James Secord. This study aims to deepen our knowledge of this important episode in the history of evolutionary ideas and explore the relationship between these geological and evolutionary discourses. To do this it focuses on the circle of natural historians around Robert Jameson, Wernerian geologist and professor of natural history at the University of Edinburgh from 1804 to 1854. From the evidence gathered here there emerges a clear confirmation that the Wernerian model of geohistory facilitated the acceptance of evolutionary explanations of the history of life in early nineteenth-century Scotland. As Edinburgh was at this time the most important center of medical education in the English-speaking world, this almost certainly influenced the reception and development of evolutionary ideas in the decades that followed.</p