145 research outputs found
Double-Layer Systems at Zero Magnetic Field
We investigate theoretically the effects of intralayer and interlayer
exchange in biased double-layer electron and hole systems, in the absence of a
magnetic field. We use a variational Hartree-Fock-like approximation to analyze
the effects of layer separation, layer density, tunneling, and applied gate
voltages on the layer densities and on interlayer phase coherence. In agreement
with earlier work, we find that for very small layer separations and low layer
densities, an interlayer-correlated ground state possessing spontaneous
interlayer coherence (SILC) is obtained, even in the absence of interlayer
tunneling. In contrast to earlier work, we find that as a function of total
density, there exist four, rather than three, distinct noncrystalline phases
for balanced double-layer systems without interlayer tunneling. The newly
identified phase exists for a narrow range of densities and has three
components and slightly unequal layer densities, with one layer being spin
polarized, and the other unpolarized. An additional two-component phase is also
possible in the presence of sufficiently strong bias or tunneling. The
lowest-density SILC phase is the fully spin- and pseudospin-polarized
``one-component'' phase discussed by Zheng {\it et al.} [Phys. Rev. B {\bf 55},
4506 (1997)]. We argue that this phase will produce a finite interlayer Coulomb
drag at zero temperature due to the SILC. We calculate the particle densities
in each layer as a function of the gate voltage and total particle density, and
find that interlayer exchange can reduce or prevent abrupt transfers of charge
between the two layers. We also calculate the effect of interlayer exchange on
the interlayer capacitance.Comment: 35 pages, 19 figures included. To appear in PR
Material and geometric nonlinear analysis of reinforced concrete frame structures considering the influence of shear strength complementary mechanisms
Measurement of CP observables in B± → D(⁎)K± and B± → D(⁎)π± decays
Measurements of CP observables in B ± →D (⁎) K ± and B ± →D (⁎) π ± decays are presented, where D (⁎) indicates a neutral D or D ⁎ meson that is an admixture of D (⁎)0 and D¯ (⁎)0 states. Decays of the D ⁎ meson to the Dπ 0 and Dγ final states are partially reconstructed without inclusion of the neutral pion or photon, resulting in distinctive shapes in the B candidate invariant mass distribution. Decays of the D meson are fully reconstructed in the K ± π ∓ , K + K − and π + π − final states. The analysis uses a sample of charged B mesons produced in pp collisions collected by the LHCb experiment, corresponding to an integrated luminosity of 2.0, 1.0 and 2.0 fb −1 taken at centre-of-mass energies of s=7, 8 and 13 TeV, respectively. The study of B ± →D ⁎ K ± and B ± →D ⁎ π ± decays using a partial reconstruction method is the first of its kind, while the measurement of B ± →DK ± and B ± →Dπ ± decays is an update of previous LHCb measurements. The B ± →DK ± results are the most precise to date
First observation of forward production in collisions at TeV
The decay Z→bb¯ is reconstructed in pp collision data, corresponding to 2 fb −1 of integrated luminosity, collected by the LHCb experiment at a centre-of-mass energy of s=8 TeV. The product of the Z production cross-section and the Z→bb¯ branching fraction is measured for candidates in the fiducial region defined by two particle-level b -quark jets with pseudorapidities in the range 2.220 GeV and dijet invariant mass in the range 452045 < m_{jj} < 1655462 \pm 763Z \rightarrow b \bar{b}332 \pm 46 \pm 59Z \rightarrow b \bar{b}pp$ collisions
The LHCb upgrade I
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software
Study of the doubly charmed tetraquark T+cc
Quantum chromodynamics, the theory of the strong force, describes interactions of coloured quarks and gluons and the formation of hadronic matter. Conventional hadronic matter consists of baryons and mesons made of three quarks and quark-antiquark pairs, respectively. Particles with an alternative quark content are known as exotic states. Here a study is reported of an exotic narrow state in the D0D0π+ mass spectrum just below the D*+D0 mass threshold produced in proton-proton collisions collected with the LHCb detector at the Large Hadron Collider. The state is consistent with the ground isoscalar T+cc tetraquark with a quark content of ccu⎯⎯⎯d⎯⎯⎯ and spin-parity quantum numbers JP = 1+. Study of the DD mass spectra disfavours interpretation of the resonance as the isovector state. The decay structure via intermediate off-shell D*+ mesons is consistent with the observed D0π+ mass distribution. To analyse the mass of the resonance and its coupling to the D*D system, a dedicated model is developed under the assumption of an isoscalar axial-vector T+cc state decaying to the D*D channel. Using this model, resonance parameters including the pole position, scattering length, effective range and compositeness are determined to reveal important information about the nature of the T+cc state. In addition, an unexpected dependence of the production rate on track multiplicity is observed
Study of the lineshape of the chi(c1) (3872) state
A study of the lineshape of the chi(c1) (3872) state is made using a data sample corresponding to an integrated luminosity of 3 fb(-1) collected in pp collisions at center-of-mass energies of 7 and 8 TeV with the LHCb detector. Candidate chi(c1)(3872) and psi(2S) mesons from b-hadron decays are selected in the J/psi pi(+)pi(-) decay mode. Describing the lineshape with a Breit-Wigner function, the mass splitting between the chi(c1 )(3872) and psi(2S) states, Delta m, and the width of the chi(c1 )(3872) state, Gamma(Bw), are determined to be (Delta m=185.598 +/- 0.067 +/- 0.068 Mev,)(Gamma BW=1.39 +/- 0.24 +/- 0.10 Mev,) where the first uncertainty is statistical and the second systematic. Using a Flatte-inspired model, the mode and full width at half maximum of the lineshape are determined to be (mode=3871.69+0.00+0.05 MeV.)(FWHM=0.22-0.04+0.13+0.07+0.11-0.06-0.13 MeV, ) An investigation of the analytic structure of the Flatte amplitude reveals a pole structure, which is compatible with a quasibound D-0(D) over bar*(0) state but a quasivirtual state is still allowed at the level of 2 standard deviations
Measurement of the CKM angle in and decays with
A measurement of -violating observables is performed using the decays
and , where the meson is
reconstructed in one of the self-conjugate three-body final states and (commonly denoted ). The decays are analysed in bins of the -decay phase space, leading
to a measurement that is independent of the modelling of the -decay
amplitude. The observables are interpreted in terms of the CKM angle .
Using a data sample corresponding to an integrated luminosity of
collected in proton-proton collisions at centre-of-mass
energies of , , and with the LHCb experiment,
is measured to be . The hadronic
parameters , , , and ,
which are the ratios and strong-phase differences of the suppressed and
favoured decays, are also reported
Cis-dichloro-diammine platinum (II) as stain for electron microscopic preparations.
Cis-dichloro-diammine platinum (II) provides a strong contrast to electron microscopic preparations by reacting with nucleic acids and proteins. This staining technique is easy and applicable to ultrathin sections embedded in Epon; various staining conditions have been tested
Thermodynamic method for obtaining the solubilities of complex medium-sized chemicals in pure and mixed solvents
- …