A Lagrangian model for wave-induced harbour oscillations

A set of equations in the Lagrangian description are derived for the propagation of long gravity waves in two horizontal directions for the purpose of determining the response of harbours with sloping boundaries to long waves. The equations include terms to account for weakly nonlinear and dispersive processes. A finite element formulation for these equations is developed which treats the propagation of transient waves in regions of arbitrary shape with vertical or sloping boundaries. Open boundaries are treated by specifying the wave elevation along the boundary or by applying a radiation boundary condition to absorb the waves leaving the computational domain. Nonlinear aspects of the interaction of long gravity waves with sloping boundaries and frequency dispersion due to non-hydrostatic effects are investigated. Results from the model are then compared with laboratory experiments of the response to long-wave excitation of a narrow rectangular harbour with a depth that decreases linearly from the entrance to the shore line

Deep lithospheric structures along the southern central Chile Margin from wide-angle P-wave modellilng

Crustal- and upper-mantle structures of the subduction zone in south central Chile, between 42 degrees S and 46 degrees S, are determined from seismic wide-angle reflection and refraction data, using the seismic ray tracing method to calculate minimum parameter models. Three profiles along differently aged segments of the subducting Nazca Plate were analysed in order to study subduction zone structure dependencies related to the age, that is, thermal state, of the incoming plate. The age of the oceanic crust at the trench ranges from 3 Ma on the southernmost profile, immediately north of the Chile triple junction, to 6.5 Ma old about 100 km to the north, and to 14.5 Ma old another 200 km further north, off the Island of Chiloe. Remarkable similarities appear in the structures of both the incoming as well as the overriding plate. The oceanic Nazca Plate is around 5 km thick, with a slightly increasing thickness northward, reflecting temperature changes at the time of crustal generation. The trench basin is about 2 km thick except in the south where the Chile Ridge is close to the deformation front and only a small, 800-m-thick trench infill could develop. In south central Chile, typically three quarters (1.5 km) of the trench sediments subduct below the decollement in the subduction channel. To the north and south of the study area, only about one quarter to one third of the sediments subducts, the rest is accreted above. Similarities in the overriding plate are the width of the active accretionary prism, 35-50 km, and a strong lateral crustal velocity gradient zone about 75-80 km landward from the deformation front, where landward upper-crustal velocities of over 5.0-5.4 km s<SU-1</SU decrease seaward to around 4.5 km s<SU-1</SU within about 10 km, which possibly represents a palaeo-backstop. This zone is also accompanied by strong intraplate seismicity. Differences in the subduction zone structures exist in the outer rise region, where the northern profile exhibits a clear bulge of uplifted oceanic lithosphere prior to subduction whereas the younger structures have a less developed outer rise. This plate bending is accompanied by strongly reduced rock velocities on the northern profile due to fracturing and possible hydration of the crust and upper mantle. The southern profiles do not exhibit such a strong alteration of the lithosphere, although this effect may be counteracted by plate cooling effects, which are reflected in increasing rock velocities away from the spreading centre. Overall there appears little influence of incoming plate age on the subduction zone structure which may explain why the M-w = 9.5 great Chile earthquake from 1960 ruptured through all these differing age segments. The rupture area, however, appears to coincide with a relatively thick subduction channel

Water quality in the central Nebraska basins, Nebraska, 1992-95

This report is intended to summarize major findings that emerged between 1992 and 1995 from the water-quality assessment of the Central Nebraska Basins Study Unit and to relate these findings to water-quality issues of regional and national concern. The information is primarily intended for those who are involved in waterresource management. Indeed, this report addresses many of the concerns raised by regulators, water-utility managers, industry representatives, and other scientists, engineers, public officials, and members of stakeholder groups who provided advice and input to the USGS during this NAWQA Study-Unit investigation. Yet, the information contained here may also interest those who simply wish to know more about the quality of water in the rivers and aquifers in the area where they live. Land use in central Nebraska appears to affect water quality significantly; streams in rangelands generally had fewer occurrences and smaller concentrations of pesticides than did streams in croplands where corn and soybeans were planted extensively. Subbasins with greater proportions of rangeland, such as the Dismal River, had negligible herbicide concentrations. The largest pesticide concentrations were in storm runoff following pesticide applications. Because some pesticide concentrations may exceed the U.S. Environmental Protection Agency’s (USEPA) drinking-water Maximum Contaminant Levels (MCLs) in storm runoff, the timing and intensity of rainfall has implications for drinking-water supplies. Pesticides in streams from storm runoff may enter alluvial aquifers as a consequence of ground-water withdrawals. Sites with degraded water chemistry commonly had degraded physical habitats as well. Streamflow regulation of the Platte River has affected water quality through habitat alterations that are deleterious to native species. The combination of degraded physical and chemical environments commonly resulted in structurally simple fish communities. CONTENTS National Water-Quality Assessment Program .. 1 Summary of major issues and findings... 2 Environmental setting and hydrologic conditions.... 4 Major issues and findings ... 6 Nitrate content in water is related to agricultural land management 6 Agricultural activities potentially affect the management of public water supplies . 8 Water quality in the Platte River alluvial aquifer may be affected by surface-water quality in areas of ground-water withdrawals .. 10 Aquatic environments potentially are altered by human activities... 12 Aquatic and migratory species are affected directly by changes in the physical characteristics of the Platte River .. 14 Water-quality conditions in anational context ... 16 Study design and data collection .. 20 Summary of compound detections and concentrations ... 22 References . 28 Glossary 3

Report from the third international consensus meeting to harmonise core outcome measures for atopic eczema/dermatitis clinical trials (HOME).

This report provides a summary of the third meeting of the Harmonising Outcome Measures for Eczema (HOME) initiative held in San Diego, CA, U.S.A., 6-7 April 2013 (HOME III). The meeting addressed the four domains that had previously been agreed should be measured in every eczema clinical trial: clinical signs, patient-reported symptoms, long-term control and quality of life. Formal presentations and nominal group techniques were used at this working meeting, attended by 56 voting participants (31 of whom were dermatologists). Significant progress was made on the domain of clinical signs. Without reference to any named scales, it was agreed that the intensity and extent of erythema, excoriation, oedema/papulation and lichenification should be included in the core outcome measure for the scale to have content validity. The group then discussed a systematic review of all scales measuring the clinical signs of eczema and their measurement properties, followed by a consensus vote on which scale to recommend for inclusion in the core outcome set. Research into the remaining three domains was presented, followed by discussions. The symptoms group and quality of life groups need to systematically identify all available tools and rate the quality of the tools. A definition of long-term control is needed before progress can be made towards recommending a core outcome measure

Seismic evidence for large-scale compositional heterogeneity of oceanic core complexes

Author Posting. © American Geophysical Union, 2008. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry Geophysics Geosystems 9 (2008): Q08002, doi:10.1029/2008GC002009.Long-lived detachment faults at mid-ocean ridges exhume deep-seated rocks to form oceanic core complexes (OCCs). Using large-offset (6 km) multichannel seismic data, we have derived two-dimensional seismic tomography models for three of the best developed OCCs on the Mid-Atlantic Ridge. Our results show that large lateral variations in P wave velocity occur within the upper ~0.5–1.7 km of the lithosphere. We observe good correlations between velocity structure and lithology as documented by in situ geological samples and seafloor morphology, and we use these correlations to show that gabbros are heterogeneously distributed as large (tens to >100 km2) bodies within serpentinized peridotites. Neither the gabbros nor the serpentinites show any systematic distribution with respect to along-isochron position within the enclosing spreading segment, indicating that melt extraction from the mantle is not necessarily focused at segment centers, as has been commonly inferred. In the spreading direction, gabbros are consistently present toward the terminations of the detachment faults. This suggests enhanced magmatism during the late stage of OCC formation due either to natural variability in the magmatic cycle or to decompression melting during footwall exhumation. Heat introduced into the rift valley by flow and crystallization of this melt could weaken the axial lithosphere and result in formation of new faults, and it therefore may explain eventual abandonment of detachments that form OCCs. Detailed seismic studies of the kind described here, when constrained by seafloor morphology and geological samples, can distinguish between major lithological units such as volcanics, gabbros, and serpentinized peridotites at lateral scales of a few kilometers. Thus such studies have tremendous potential to elucidate the internal structure of the shallow lithosphere and to help us understand the tectonic and magmatic processes by which they were emplaced.This research was supported by grants from the U.S. NSF-IODP Program

Continental hyperextension, mantle exhumation, and thin oceanic crust at the continent-ocean transition, West Iberia: New insights from wide-angle seismic

Hyperextension of continental crust at the Deep Galicia rifted margin in the North Atlantic has been accommodated by the rotation of continental fault blocks, which are underlain by the S reflector, an interpreted detachment fault, along which exhumed and serpentinized mantle peridotite is observed. West of these features, the enigmatic Peridotite Ridge has been inferred to delimit the western extent of the continent‐ocean transition. An outstanding question at this margin is where oceanic crust begins, with little existing data to constrain this boundary and a lack of clear seafloor spreading magnetic anomalies. Here we present results from a 160 km long wide‐angle seismic profile (Western Extension 1). Travel time tomography models of the crustal compressional velocity structure reveal highly thinned and rotated crustal blocks separated from the underlying mantle by the S reflector. The S reflector correlates with the 6.0–7.0 km s−1 velocity contours, corresponding to peridotite serpentinization of 60–30%, respectively. West of the Peridotite Ridge, shallow and sparse Moho reflections indicate the earliest formation of an anomalously thin oceanic crustal layer, which increases in thickness from ~0.5 km at ~20 km west of the Peridotite Ridge to ~1.5 km, 35 km further west. P wave velocities increase smoothly and rapidly below top basement, to a depth of 2.8–3.5 km, with an average velocity gradient of 1.0 s−1. Below this, velocities slowly increase toward typical mantle velocities. Such a downward increase into mantle velocities is interpreted as decreasing serpentinization of mantle rock with depth

Crustal structure of the Peruvian continental margin from wide-angle seismic studies

Active seismic investigations along the Pacific margin off Peru were carried out using ocean bottom hydrophones and seismometers. The structure and the P-wave velocities of the obliquely subducting oceanic Nazca Plate and overriding South American Plate from 8°S to 15°S were determined by modelling the wide-angle seismic data combined with the analysis of reflection seismic data. Three detailed cross-sections of the subduction zone of the Peruvian margin and one strike-line across the Lima Basin are presented here. The oceanic crust of the Nazca Plate, with a thin pelagic sediment cover, ranging from 0–200 m, has an average thickness of 6.4 km. At 8°S it thins to 4 km in the area of Trujillo Trough, a graben-like structure. Across the margin, the plate boundary can be traced to 25 km depth. As inferred from the velocity models, a frontal prism exists adjacent to the trench axis and is associated with the steep lower slope. Terrigeneous sediments are proposed to be transported downslope due to gravitational forces and comprise the frontal prism, characterized by low seismic P-wave velocities. The lower slope material accretes against a backstop structure, which is defined by higher seismic P-wave velocities, 3.5–6.0 km s−1. The large variations in surface slope along one transect may reflect basal removal of upper plate material, thus steepening the slope surface. Subduction processes along the Peruvian margin are dominated by tectonic erosion indicated by the large margin taper, the shape and bending of the subducting slab, laterally varying slope angles and the material properties of the overriding continental plate. The erosional mechanisms, frontal and basal erosion, result in the steepening of the slope and consequent slope failure

Limits of the seismogenic zone in the epicentral region of the 26 December 2004 great Sumatra-Andaman earthquake: Results from seismic refraction and wide-angle reflection surveys and thermal modeling

The 26 December 2004 Sumatra earthquake (Mw = 9.1) initiated around 30 km depth and ruptured 1300 km of the Indo-Australian Sunda plate boundary. During the Sumatra OBS (ocean bottom seismometer) survey, a wide angle seismic profile was acquired across the epicentral region. A seismic velocity model was obtained from combined travel time tomography and forward modeling. Together with reflection seismic data from the SeaCause II cruise, the deep structure of the source region of the great earthquake is revealed. Four to five kilometers of sediments overlie the oceanic crust at the trench, and the subducting slab can be imaged down to a depth of 35 km. We find a crystalline backstop 120 km from the trench axis, below the fore arc basin. A high velocity zone at the lower landward limit of the raycovered domain, at 22 km depth, marks a shallow continental Moho, 170 km from the trench. The deep structure obtained from the seismic data was used to construct a thermal model of the fore arc in order to predict the limits of the seismogenic zone along the plate boundary fault. Assuming 100C-150C as its updip limit, the seismogenic zone is predicted to begin 530 km from the trench. The downdip limit of the 2004 rupture as inferred from aftershocks is within the 350C 450C temperature range, but this limit is 210-250 km from the trench axis and is much deeper than the fore arc Moho. The deeper part of the rupture occurred along the contact between the mantle wedge and the downgoing plate

Fault-controlled hydration of the upper mantle during continental rifting

Water and carbon are transferred from the ocean to the mantle in a process that alters mantle peridotite to create serpentinite and supports diverse ecosystems1. Serpentinized mantle rocks are found beneath the sea floor at slow- to ultraslow-spreading mid-ocean ridges1 and are thought to be present at about half the world’s rifted margins2, 3. Serpentinite is also inferred to exist in the downgoing plate at subduction zones4, where it may trigger arc magmatism or hydrate the deep Earth. Water is thought to reach the mantle via active faults3, 4. Here we show that serpentinization at the rifted continental margin offshore from western Spain was probably initiated when the whole crust cooled to become brittle and deformation was focused along large normal faults. We use seismic tomography to image the three-dimensional distribution of serpentinization in the mantle and find that the local volume of serpentinite beneath thinned, brittle crust is related to the amount of displacement along each fault. This implies that sea water reaches the mantle only when the faults are active. We estimate the fluid flux along the faults and find it is comparable to that inferred for mid-ocean ridge hydrothermal systems. We conclude that brittle processes in the crust may ultimately control the global flux of sea water into the Earth