Salmeterol plus fluticasone propionate versus fluticasone propionate plus montelukast: a randomised controlled trial investigating the effects on airway inflammation in asthma

<p>Abstract</p> <p>Background</p> <p>Few studies have compared treatment strategies in patients with asthma poorly controlled on low dose inhaled corticosteroids, and little is known about the effects of different treatments on airway inflammation. In this double-blind, placebo-controlled, parallel group study, we compared the effects of salmeterol plus fluticasone propionate (FP) (Seretide™; SFC) and FP plus montelukast (FP/M) on sputum inflammatory markers, airway responsiveness, lung function, and symptoms in adult asthmatics.</p> <p>Methods</p> <p>Sixty-six subjects were randomised to SFC or FP/M for 12 weeks. The primary outcome was changes in neutrophil, eosinophil, macrophage, lymphocyte, and epithelial cell levels in induced sputum. Additional outcomes included the change in other sputum markers of airway inflammation, airway responsiveness, symptom control, and lung function.</p> <p>Results</p> <p>Both treatments had no significant effect on induced sputum inflammatory cells, although there was a trend for a reduction in sputum eosinophils. Both treatments significantly improved airway responsiveness, whereas SFC generally led to greater improvements in symptom control and lung function than FP/M. FP/M led to significantly greater reductions in sputum cysteinyl leukotrienes than SFC (treatment ratio 1.80; 95% CI 1.09, 2.94).</p> <p>Conclusion</p> <p>Both treatments led to similar control of eosinophilic airway inflammation, although PEF and symptom control were better with SFC.</p> <p>Study number</p> <p>SAM40030 (SOLTA)</p

Stellar winds from Massive Stars

We review the various techniques through which wind properties of massive stars - O stars, AB supergiants, Luminous Blue Variables (LBVs), Wolf-Rayet (WR) stars and cool supergiants - are derived. The wind momentum-luminosity relation (e.g. Kudritzki et al. 1999) provides a method of predicting mass-loss rates of O stars and blue supergiants which is superior to previous parameterizations. Assuming the theoretical sqrt(Z) metallicity dependence, Magellanic Cloud O star mass-loss rates are typically matched to within a factor of two for various calibrations. Stellar winds from LBVs are typically denser and slower than equivalent B supergiants, with exceptional mass-loss rates during giant eruptions Mdot=10^-3 .. 10^-1 Mo/yr (Drissen et al. 2001). Recent mass-loss rates for Galactic WR stars indicate a downward revision of 2-4 relative to previous calibrations due to clumping (e.g. Schmutz 1997), although evidence for a metallicity dependence remains inconclusive (Crowther 2000). Mass-loss properties of luminous (> 10^5 Lo) yellow and red supergiants from alternative techniques remain highly contradictory. Recent Galactic and LMC results for RSG reveal a large scatter such that typical mass-loss rates lie in the range 10^-6 .. 10^-4 Mo/yr, with a few cases exhibiting 10^-3 Mo/yr.Comment: 16 pages, 2 figures, Review paper to appear in Proc `The influence of binaries on stellar population studies', Brussels, Aug 2000 (D. Vanbeveren ed.), Kluwe

Differences in Nutrient Requirements Imply a Non-Linear Emergence of Leaders in Animal Groups

Collective decision making and especially leadership in groups are among the most studied topics in natural, social, and political sciences. Previous studies have shown that some individuals are more likely to be leaders because of their social power or the pertinent information they possess. One challenge for all group members, however, is to satisfy their needs. In many situations, we do not yet know how individuals within groups distribute leadership decisions between themselves in order to satisfy time-varying individual requirements. To gain insight into this problem, we build a dynamic model where group members have to satisfy different needs but are not aware of each other's needs. Data about needs of animals come from real data observed in macaques. Several studies showed that a collective movement may be initiated by a single individual. This individual may be the dominant one, the oldest one, but also the one having the highest physiological needs. In our model, the individual with the lowest reserve initiates movements and decides for all its conspecifics. This simple rule leads to a viable decision-making system where all individuals may lead the group at one moment and thus suit their requirements. However, a single individual becomes the leader in 38% to 95% of cases and the leadership is unequally (according to an exponential law) distributed according to the heterogeneity of needs in the group. The results showed that this non-linearity emerges when one group member reaches physiological requirements, mainly the nutrient ones – protein, energy and water depending on weight - superior to those of its conspecifics. This amplification may explain why some leaders could appear in animal groups without any despotism, complex signalling, or developed cognitive ability

A demographic and epidemiological study of a Mexican chiropractic college public clinic

<p>Abstract</p> <p>Background</p> <p>Descriptive studies of chiropractic patients are not new, several have been performed in the U.S., Australia, Canada, and Europe. None have been performed in a Latin American country. The purpose of this study is to describe the patients who visited a Mexican chiropractic college public clinic with respect to demographics and clinical characteristics.</p> <p>Methods</p> <p>This study was reviewed and approved by the IRB of Parker College of Chiropractic and the Universidad Estatal del Valle de Ecatepec (UNEVE). Five hundred patient files from the UNEVE public clinic from May 2005 to May 2007 were selected from an approximate total number of 3,700. Information was collected for demographics, chief complaints, associated complaints, and previous care sought.</p> <p>Results</p> <p>The sample comprised 306 (61.2%) female. Most files (44.2%) were in the age range of 40–59 years (mean of 43.4 years). The most frequent complaints were lumbar pain (29.2%) and extremity pain (28.0%), most commonly the knee. Most (62.0%) described their complaints as greater than one year. Trauma (46.6%) was indicated as the initial cause. Mean VAS score was 6.26/10 with 20% rated at 8/10.</p> <p>Conclusion</p> <p>Demographic results compared closer to studies conducted with private clinicians (females within the ages of 40–59). The primary complaint and duration was similar to previous studies (low back pain and chronic), except in this population the cause was usually initiated by trauma. The most striking features were the higher number of extremity complaints and the marked increased level of VAS score (20% rated as 8/10).</p

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

11β-hydroxysteroid dehydrogenase type 1 has no effect on survival during experimental malaria but affects parasitemia in a parasite strain-specific manner

status: publishe

The behaviour of inositol 1,3,4,5,6-pentakisphosphate in the presence of the major biological metal cations

The inositol phosphates are ubiquitous metabolites in eukaryotes, of which the most abundant are inositol hexakisphosphate (InsP6) and inositol 1,3,4,5,6-pentakisphosphate [Ins(1,3,4,5,6)P5)]. These two compounds, poorly understood functionally, have complicated complexation and solid formation behaviours with multivalent cations. For InsP6, we have previously described this chemistry and its biological implications (Veiga et al. in J Inorg Biochem 100:1800, 2006; Torres et al. in J Inorg Biochem 99:828, 2005). We now cover similar ground for Ins(1,3,4,5,6)P5, describing its interactions in solution with Na+, K+, Mg2+, Ca2+, Cu2+, Fe2+ and Fe3+, and its solid-formation equilibria with Ca2+ and Mg2+. Ins(1,3,4,5,6)P5 forms soluble complexes of 1:1 stoichiometry with all multivalent cations studied. The affinity for Fe3+ is similar to that of InsP6 and inositol 1,2,3-trisphosphate, indicating that the 1,2,3-trisphosphate motif, which Ins(1,3,4,5,6)P5 lacks, is not absolutely necessary for high-affinity Fe3+ complexation by inositol phosphates, even if it is necessary for their prevention of the Fenton reaction. With excess Ca2+ and Mg2+, Ins(1,3,4,5,6)P5 also forms the polymetallic complexes [M4(H2L)] [where L is fully deprotonated Ins(1,3,4,5,6)P5]. However, unlike InsP6, Ins(1,3,4,5,6)P5 is predicted not to be fully associated with Mg2+ under simulated cytosolic/nuclear conditions. The neutral Mg2+ and Ca2+ complexes have significant windows of solubility, but they precipitate as [Mg4(H2L)]·23H2O or [Ca4(H2L)]·16H2O whenever they exceed 135 and 56 μM in concentration, respectively. Nonetheless, the low stability of the [M4(H2L)] complexes means that the 1:1 species contribute to the overall solubility of Ins(1,3,4,5,6)P5 even under significant Mg2+ or Ca2+ excesses. We summarize the solubility behaviour of Ins(1,3,4,5,6)P5 in straightforward plots

How accurate is the phenotype? – An analysis of developmental noise in a cotton aphid clone

<p>Abstract</p> <p>Background</p> <p>The accuracy by which phenotype can be reproduced by genotype potentially is important in determining the stability, environmental sensitivity, and evolvability of morphology and other phenotypic traits. Because two sides of an individual represent independent development of the phenotype under identical genetic and environmental conditions, average body asymmetry (or "fluctuating asymmetry") can estimate the developmental instability of the population. The component of developmental instability not explained by intrapopulational differences in gene or environment (or their interaction) can be further defined as internal developmental noise. Surprisingly, developmental noise remains largely unexplored despite its potential influence on our interpretations of developmental stability, canalization, and evolvability. Proponents of fluctuating asymmetry as a bioindicator of environmental or genetic stress, often make the assumption that developmental noise is minimal and, therefore, that phenotype can respond sensitively to the environment. However, biologists still have not measured whether developmental noise actually comprises a significant fraction of the overall environmental response of fluctuating asymmetry observed within a population.</p> <p>Results</p> <p>In a morphometric study designed to partition developmental noise from fluctuating asymmetry in the wing morphology of a monoclonal culture of cotton aphid, <it>Aphis gossipyii</it>, it was discovered that fluctuating asymmetry in the aphid wing was nearly four times higher than in other insect species. Also, developmental noise comprised a surprisingly large fraction (≈ 50%) of the overall response of fluctuating asymmetry to a controlled graded temperature environment. Fluctuating asymmetry also correlated negatively with temperature, indicating that environmentally-stimulated changes in developmental instability are mediated mostly by changes in the development time of individuals.</p> <p>Conclusion</p> <p>The amount of developmental noise revealed in this trait potentially does interfere with a substantial amount of the sensitivity of fluctuating asymmetry to change in temperature. Assuming that some genetic-based variation in individual buffering of developmental instability exists in natural aphid populations, the amount of internal developmental noise determined in this study could also substantially reduce evolvability of the aphid wing. The overall findings here suggest that individual response to the seemingly high cost of stabilizing some aspects of the phenotype may account for the frequent observation of trait and species specificity in levels of fluctuating asymmetry.</p

Functional gait rehabilitation in elderly people following a fall-related hip fracture using a treadmill with visual context: design of a randomized controlled trial

Background: Walking requires gait adjustments in order to walk safely in continually changing environments. Gait adaptability is reduced in older adults, and (near) falls, fall-related hip fractures and fear of falling are common in this population. Most falls occur due to inaccurate foot placement relative to environmental hazards, such as obstacles. The C-Mill is an innovative, instrumented treadmill on which visual context (e. g., obstacles) is projected. The C-Mill is well suited to train foot positioning relative to environmental properties while concurrently utilizing the high-intensity practice benefits associated with conventional treadmill training. The present protocol was designed to examine the efficacy of C-Mill gait adaptability treadmill training for improving walking ability and reducing fall incidence and fear of falling relative to conventional treadmill training and usual care. We hypothesize that C-Mill gait adaptability treadmill training and conventional treadmill training result in better walking ability than usual care due to the enhanced training intensity, with superior effects for C-Mill gait adaptability treadmill training on gait adaptability aspects of walking given the concurrent focus on practicing step adjustments. Methods/design: The protocol describes a parallel group, single-blind, superiority randomized controlled trial with pre-tests, post-tests, retention-tests and follow-up. Hundred-twenty-six older adults with a recent fall-related hip fracture will be recruited from inpatient rehabilitation care and allocated to six weeks of C-Mill gait adaptability treadmill training (high-intensity, adaptive stepping), conventional treadmill training (high-intensity, repetitive stepping) or usual care physical therapy using block randomization, with allocation concealment by opaque sequentially numbered envelopes. Only data collectors are blind to group allocation. Study parameters related to walking ability will be assessed as primary outcome pre-training, post-training, after 4 weeks retention and 12 months follow-up. Secondary study parameters are measures related to fall incidence, fear of falling and general health. Discussion: The study will shed light on the relative importance of adaptive versus repetitive stepping and practice intensity for effective intervention programs directed at improving walking ability and reducing fall risk and fear of falling in older adults with a recent fall-related hip fracture, which may help reduce future fall-related health-care costs