Consumer Behavior Towards Safer Car Purchasing Decisions

In Malaysia, the car safety level has been elevated through regulations and a consumer-based approach, i.e. the New Car Assessment Program in Southeast Asian Countries (ASEAN NCAP). Nevertheless, the availability of information on consumers\u27 car purchasing decisions towards safety is still limited in Malaysia. Thus, this study was aimed at evaluating consumers\u27 purchasing decisions of their present cars and investigating their awareness of ASEAN NCAP. Self-administered questionnaires were distributed among consumers visiting different car showrooms and dealer shops. The findings suggest that safety was considered as one of the top three factors by the respondents when purchasing their present cars. Awareness of ASEAN NCAP has increased as compared to a previous study. This information is essential for policy makers, manufacturers and other stakeholders to assist in setting priorities with regard to the promotion of car safety in the country

The Fundamental of Leaky wave Antenna

The fundamental of leaky-wave antenna (LWAs) that have been compiled and published are presented in this paper. A leaky-wave antenna uses the guiding structural, which support the propagation of waves along the length of the structure. While the basic family of LWAs is dependent on the radiation of a propagative mode in a basic guiding structure (usually a waveguide of some sort), the radiation mechanism changes drastically from one sub-category to another. Such antennas either uniform or periodic appear in various characteristics and performances. The fundamental of the basic operating principles and physics, and discuss the design of types of LWA

Identification of bovine growth hormone (BGH) gene polymorphism using PCR-RFLP method in buffalo bulls

Growth Hormone (GH) is a single polypeptide chain synthesised and secreted from anterior pituitary gland by somatroph cells. The product of GH gene hastens metabolism and promotes the growth of many organs and tissues especially bone, muscle and visceral organs. It also regulates growth, mammary gland development and lactation. Polymorphism in this gene is associated with increase in growth and development of many tissues in the body. Aim: The objective of this study was to investigate the polymorphism of bovine growth hormone (bGH) gene in buffalo bulls (Bubalus bubalis) using the PCR-RFLP (polymerase chain reaction–restriction fragment length polymorphism) technique. Design: Genomic DNA was extracted from a total of 10 bulls, consisting of Murrah – Swamp crossbred and pure Swamp buffalo bulls. A The 446 segment of the bGH gene was amplified. The DNA amplicons were detected in 2% agarose gel following 45 minutes of electrophoresis. They were thereafter digesting with AluI endonuclease restriction enzyme, and the digested DNA were detected in 2% agarose gel following electrophoresis for about 45minutes in all samples Results: Similar bands of approximately 300 and 146-bp each, with no variation, were detected in 2% agarose gel following electrophoresis in all the animals tested. Conclusion: Based on the Alu1 digestion result, all samples produced the same allele of the gene, with no polymorphism detected

Measurement of prompt open-charm production cross sections in proton-proton collisions at root s=13 TeV

The production cross sections for prompt open-charm mesons in proton-proton collisions at a center-of-mass energy of 13TeV are reported. The measurement is performed using a data sample collected by the CMS experiment corresponding to an integrated luminosity of 29 nb(-1). The differential production cross sections of the D*(+/-), D-+/-, and D-0 ((D) over bar (0)) mesons are presented in ranges of transverse momentum and pseudorapidity 4 < p(T) < 100 GeV and vertical bar eta vertical bar < 2.1, respectively. The results are compared to several theoretical calculations and to previous measurements.Peer reviewe

Search for top squark production in fully hadronic final states in proton-proton collisions at root s=13 TeV

A search for production of the supersymmetric partners of the top quark, top squarks, is presented. The search is based on proton-proton collision events containing multiple jets, no leptons, and large transverse momentum imbalance. The data were collected with the CMS detector at the CERN LHC at a center-of-mass energy of 13 TeV, and correspond to an integrated luminosity of 137 fb(-1). The targeted signal production scenarios are direct and gluino-mediated top squark production, including scenarios in which the top squark and neutralino masses are nearly degenerate. The search utilizes novel algorithms based on deep neural networks that identify hadronically decaying top quarks and W bosons, which are expected in many of the targeted signal models. No statistically significant excess of events is observed relative to the expectation from the standard model, and limits on the top squark production cross section are obtained in the context of simplified supersymmetric models for various production and decay modes. Exclusion limits as high as 1310 GeVare established at the 95% confidence level on the mass of the top squark for direct top squark production models, and as high as 2260 GeV on the mass of the gluino for gluino-mediated top squark production models. These results represent a significant improvement over the results of previous searches for supersymmetry by CMS in the same final state.Peer reviewe

Measurements of production cross sections of the Higgs boson in the four-lepton final state in proton–proton collisions at √s=13Te

Production cross sections of the Higgs boson are measured in the H → Z Z → 4 ℓ (ℓ=e,μ) decay channel. A data sample of proton–proton collisions at a center-of-mass energy of 13Te, collected by the CMS detector at the LHC and corresponding to an integrated luminosity of 137fb-1 is used. The signal strength modifier μ, defined as the ratio of the Higgs boson production rate in the 4 ℓ channel to the standard model (SM) expectation, is measured to be μ=0.94±0.07(stat)-0.08+0.09(syst) at a fixed value of mH=125.38Ge. The signal strength modifiers for the individual Higgs boson production modes are also reported. The inclusive fiducial cross section for the H → 4 ℓ process is measured to be 2.84-0.22+0.23(stat)-0.21+0.26(syst)fb, which is compatible with the SM prediction of 2.84±0.15fb for the same fiducial region. Differential cross sections as a function of the transverse momentum and rapidity of the Higgs boson, the number of associated jets, and the transverse momentum of the leading associated jet are measured. A new set of cross section measurements in mutually exclusive categories targeted to identify production mechanisms and kinematical features of the events is presented. The results are in agreement with the SM predictions.STFC, Marie-Curie program and the European Research Council and Horizon 2020 Gran

Data quality control for survey instrument of office investors in rationalising green office building investment in Kuala Lumpur by the application of Rasch analysis

Purpose: The purpose of this paper is to attempt to verify the quality of the survey instrument of office investors in rationalising green office building investment in the city of Kuala Lumpur using the Rasch measurement method. It investigates whether the quality of the data obtained from the survey is statistically acceptable and aims to ensure that the scales used are based on the same measurement model and fit with the Rasch model. Design/methodology/approach: In achieving this objective, a questionnaire survey was developed consisting of six sections. Some 394 questionnaires were distributed, and in total, 106 responses were received from office investors who own and lease office buildings in the Federal Territory of Kuala Lumpur. The data obtained from this survey were entered into Rasch software, and the analysis aims to consider three main parameters, specifically: point measure correlation 0.32 < x < 0.8; outfit mean squared 0.5 < y < 1.5; and outfit z-standard −2 < z < 2. It also provides a separable or independent measurement instrument for the parameters of the research object. Findings: The analysis performed using the Rasch model confirmed that all items in the questionnaire construct were statistically reliable and valid. The Rasch analysis consists of, namely, the summary statistics; item unidimensionality to provide interval measures of item endorsements and fit statistics on persons involved; and items for further investigation. Unidimensionality, as a pre-requisite to the Rasch analysis, provides statistics on whether the items are on the same latent variable intended by the instrument. The results were also supported by Cronbach’s alpha at 0.91 which showed excellent reliability for person data. The results showed that the summary statistics, unidimensionality and item fit analysis were excellent. Originality/value: This paper introduces the application of the Rasch analysis as a provision for a new dimension and technique in examining data reliability and validity of the instrument