Low specificity of determine HIV1/2 RDT using whole blood in south west Tanzania

Objective: To evaluate the diagnostic performance of two rapid detection tests (RDTs) for HIV 1/2 in plasma and in whole blood samples. Methods: More than 15,000 study subjects above the age of two years participated in two rounds of a cohort study to determine the prevalence of HIV. HIV testing was performed using the Determine HIV 1/2 test (Abbott) in the first (2006/2007) and the HIV 1/2 STAT-PAK Dipstick Assay (Chembio) in the second round (2007/2008) of the survey. Positive results were classified into faint and strong bands depending on the visual appearance of the test strip and confirmed by ELISA and Western blot. Results: The sensitivity and specificity of the Determine RDT were 100% (95% confidence interval = 86.8 to 100%) and 96.8% (95.9 to 97.6%) in whole blood and 100% (99.7 to 100%) and 97.9% (97.6 to 98.1%) in plasma respectively. Specificity was highly dependent on the tested sample type: when using whole blood, 67.1% of positive results were false positive, as opposed to 17.4% in plasma. Test strips with only faint positive bands were more often false positive than strips showing strong bands and were more common in whole blood than in plasma. Evaluation of the STAT-PAK RDT in plasma during the second year resulted in a sensitivity of 99.7% (99.1 to 99.9%) and a specificity of 99.3% (99.1 to 99.4%) with 6.9% of the positive results being false. Conclusions: Our study shows that the Determine HIV 1/2 strip test with its high sensitivity is an excellent tool to screen for HIV infection, but that – at least in our setting – it can not be recommended as a confirmatory test in VCT campaigns where whole blood is used

Effectiveness of a questionnaire based intervention programme on the prevalence of arm, shoulder and neck symptoms, risk factors and sick leave in computer workers: A cluster randomised controlled trial in an occupational setting

<p>Abstract</p> <p>Background</p> <p>Arm, shoulder and neck symptoms are very prevalent among computer workers. In an attempt to reduce these symptoms, a large occupational health service in the Netherlands developed a preventive programme on exposure to risk factors, prevalence of arm, shoulder and neck symptoms, and sick leave in computer workers. The purpose of this study was to assess the effectiveness of this intervention programme.</p> <p>Methods</p> <p>The study was a randomised controlled trial. The participants were assigned to either the intervention group or the usual care group by means of cluster randomisation. At baseline and after 12 months of follow-up, the participants completed the RSI QuickScan questionnaire on exposure to the risk factors and on the prevalence of arm, shoulder and neck symptoms. A tailor-made intervention programme was proposed to participants with a high risk profile at baseline. Examples of implemented interventions are an individual workstation check, a visit to the occupational health physician and an education programme on the prevention of arm, shoulder and neck symptoms. The primary outcome measure was the prevalence of arm, shoulder and neck symptoms. Secondary outcome measures were the scores on risk factors for arm, shoulder and neck symptoms and the number of days of sick leave. Sick leave data was obtained from the companies. Multilevel analyses were used to test the effectiveness.</p> <p>Results</p> <p>Of the 1,673 persons invited to participate in the study, 1,183 persons (71%) completed the baseline questionnaire and 741 persons participated at baseline as well as at 12-month follow-up. At 12-month follow-up, the intervention group showed a significant positive change (OR = 0.48) in receiving information on healthy computer use, as well as a significant positive change regarding risk indicators for work posture and movement, compared to the usual care group. There were no significant differences in changes in the prevalence of arm, shoulder and neck symptoms or sick leave between the intervention and usual care group.</p> <p>Conclusions</p> <p>The effects of the RSI QuickScan intervention programme were small, possibly as a result of difficulties with the implementation process of the proposed interventions. However, some significant positive effects were found as to an increase in receiving education and a decrease in exposure to adverse postures and movements. With regard to symptoms and sick leave, only small and non-significant effects were found.</p> <p>Trial registration</p> <p>Netherlands National Trial Register NTR1117</p

Spin pumping in magnetic trilayer structures with an MgO barrier

We present a study of the interaction mechanisms in magnetic trilayer structures with an MgO barrier grown by molecular beam epitaxy. The interlayer exchange coupling, A ex, is determined using SQUID magnetometry and ferromagnetic resonance (FMR), displaying an unexpected oscillatory behaviour as the thickness, t MgO, is increased from 1 to 4 nm. Transmission electron microscopy confirms the continuity and quality of the tunnelling barrier, eliminating the prospect of exchange arising from direct contact between the two ferromagnetic layers. The Gilbert damping is found to be almost independent of the MgO thickness, suggesting the suppression of spin pumping. The element-specific technique of X-ray detected FMR reveals a small dynamic exchange interaction, acting in concert with the static interaction to induce coupled precession across the multilayer stack. These results highlight the potential of spin pumping and spin transfer torque for device applications in magnetic tunnel junctions relying on commonly used MgO barriers

Biomorpher: interactive evolution for parametric design

Combining graph-based parametric design with metaheuristic solvers has to date focussed solely on performance based criteria and solving clearly defined objectives. In this paper, we outline a new method for combining a parametric modelling environment with an interactive Cluster-Orientated Genetic Algorithm (COGA). In addition to performance criteria, evolutionary design exploration can be guided through choice alone, with user motivation that cannot be easily defined. As well as numeric parameters forming a genotype, the evolution of whole parametric definitions is discussed through the use of genetic programming. Visualisation techniques that enable mixing small populations for interactive evolution with large populations for performance-based optimisation are discussed, with examples from both academia and industry showing a wide range of applications

Studying the Underlying Event in Drell-Yan and High Transverse Momentum Jet Production at the Tevatron

We study the underlying event in proton-antiproton collisions by examining the behavior of charged particles (transverse momentum pT > 0.5 GeV/c, pseudorapidity |\eta| < 1) produced in association with large transverse momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV center-of-mass energy. We use the direction of the lepton-pair (in Drell-Yan production) or the leading jet (in high-pT jet production) in each event to define three regions of \eta-\phi space; toward, away, and transverse, where \phi is the azimuthal scattering angle. For Drell-Yan production (excluding the leptons) both the toward and transverse regions are very sensitive to the underlying event. In high-pT jet production the transverse region is very sensitive to the underlying event and is separated into a MAX and MIN transverse region, which helps separate the hard component (initial and final-state radiation) from the beam-beam remnant and multiple parton interaction components of the scattering. The data are corrected to the particle level to remove detector effects and are then compared with several QCD Monte-Carlo models. The goal of this analysis is to provide data that can be used to test and improve the QCD Monte-Carlo models of the underlying event that are used to simulate hadron-hadron collisions.Comment: Submitted to Phys.Rev.

Diffractive Dijet Production at sqrt(s)=630 and 1800 GeV at the Fermilab Tevatron

We report a measurement of the diffractive structure function $F_{jj}^D$ of the antiproton obtained from a study of dijet events produced in association with a leading antiproton in $\bar pp$ collisions at $\sqrt s=630$ GeV at the Fermilab Tevatron. The ratio of $F_{jj}^D$ at $\sqrt s=630$ GeV to $F_{jj}^D$ obtained from a similar measurement at $\sqrt s=1800$ GeV is compared with expectations from QCD factorization and with theoretical predictions. We also report a measurement of the $\xi$ ($x$-Pomeron) and $\beta$ ($x$ of parton in Pomeron) dependence of $F_{jj}^D$ at $\sqrt s=1800$ GeV. In the region $0.035<\xi<0.095$, $|t|<1$ GeV$^2$ and $\beta<0.5$, $F_{jj}^D(\beta,\xi)$ is found to be of the form $\beta^{-1.0\pm 0.1} \xi^{-0.9\pm 0.1}$, which obeys $\beta$-$\xi$ factorization.Comment: LaTeX, 9 pages, Submitted to Phys. Rev. Letter

Measurement of B(t->Wb)/B(t->Wq) at the Collider Detector at Fermilab

We present a measurement of the ratio of top-quark branching fractions R= B(t -> Wb)/B(t -> Wq), where q can be a b, s or a d quark, using lepton-plus-jets and dilepton data sets with integrated luminosity of ~162 pb^{-1} collected with the Collider Detector at Fermilab during Run II of the Tevatron. The measurement is derived from the relative numbers of t-tbar events with different multiplicity of identified secondary vertices. We set a lower limit of R > 0.61 at 95% confidence level.Comment: 7 pages, 2 figures, published in Physical Review Letters; changes made to be consistent with published versio

Forward-Backward Asymmetry in Top Quark Production in ppbar Collisions at sqrt{s}=1.96 TeV

Reconstructable final state kinematics and charge assignment in the reaction ppbar->ttbar allows tests of discrete strong interaction symmetries at high energy. We define frame dependent forward-backward asymmetries for the outgoing top quark in both the ppbar and ttbar rest frames, correct for experimental distortions, and derive values at the parton-level. Using 1.9/fb of ppbar collisions at sqrt{s}=1.96 TeV recorded with the CDF II detector at the Fermilab Tevatron, we measure forward-backward top quark production asymmetries in the ppbar and ttbar rest frames of A_{FB,pp} = 0.17 +- 0.08 and A_{FB,tt} = 0.24 +- 0.14.Comment: 7 pages, 2 figures, submitted to Phys.Rev.Lett, corrected references and change of tex

Measurement of the W+W−W^+W^- Production Cross Section and Search for Anomalous WWγWW\gamma and WWZWWZ Couplings in ppˉp \bar p Collisions at s=1.96\sqrt{s} = 1.96 TeV

This Letter describes the current most precise measurement of the $W$ boson pair production cross section and most sensitive test of anomalous $WW\gamma$ and $WWZ$ couplings in $p \bar p$ collisions at a center-of-mass energy of 1.96 TeV. The $WW$ candidates are reconstructed from decays containing two charged leptons and two neutrinos, where the charged leptons are either electrons or muons. Using data collected by the CDF II detector from 3.6 fb$^{-1}$ of integrated luminosity, a total of 654 candidate events are observed with an expected background contribution of $320 \pm 47$ events. The measured total cross section is $\sigma (p \bar p \to W^+ W^- + X) = 12.1 \pm 0.9 \textrm{(stat)} ^{+1.6}_{-1.4} \textrm{(syst)}$ pb, which is in good agreement with the standard model prediction. The same data sample is used to place constraints on anomalous $WW\gamma$ and $WWZ$ couplings.Comment: submitted to Phys. Rev. Let