Integrated Design and Manufacturing Systems for an Engineer to Order SME

For the last thirty years, manufacturers have attempted to integrate their information systems. The benefits of doing this for a manufacturer are both obvious and significant. Despite this, however, case studies describing centrally designed and integrated manufacturing information systems have been largely restricted to larger organisations. While it is not unusual for Small and Medium Enterprises (SMEs) to link some of their sub-systems, it remains relatively rare for such businesses to attempt to design and implement a single, integrated information system from the top down. This paper reports on a systems development project undertaken by the Manchester based SME, S+B Ltd. The company initiated an ambitious Knowledge Transfer Partnership (KTP) project in 2016 with the goal of designing and implementing fully integrated systems that embraced Computer Aided Design (CAD), manufacturing technology and Enterprise Resource Planning (ERP). The projects objectives were three-fold; first to improve efficiency and eliminate duplication of effort. Second, to reduce the number of errors that are created by the ad-hoc transfer of data between sub-systems. Third and most important, to reduce the number of times information was transferred between subsystems to shorten lead-times to customers. This paper reports on the various steps undertaken during the project from the initial process mapping exercise through to the implementation of the new systems

Nanostructured luminescently labeled nucleic acids

Important and emerging trends at the interface of luminescence, nucleic acids and nanotechnology are: (i) the conventional luminescence labeling of nucleic acid nanostructures (e.g. DNA tetrahedron); (ii) the labeling of bulk nucleic acids (e.g. single‐stranded DNA, double‐stranded DNA) with nanostructured luminescent labels (e.g. copper nanoclusters); and (iii) the labeling of nucleic acid nanostructures (e.g. origami DNA) with nanostructured luminescent labels (e.g. silver nanoclusters). This review surveys recent advances in these three different approaches to the generation of nanostructured luminescently labeled nucleic acids, and includes both direct and indirect labeling methods

Mechanisms involved in acquisition of bla<inf>NDM</inf> genes by IncA/C<inf>2</inf> and IncFII<inf>Y</inf> plasmids

Copyright © 2016, American Society for Microbiology. All Rights Reserved. blaNDM genes confer carbapenem resistance and have been identified on transferable plasmids belonging to different incompatibility (Inc) groups. Here we present the complete sequences of four plasmids carrying a blaNDM gene, pKP1-NDM-1, pEC2-NDM-3, pECL3-NDM-1, and pEC4-NDM-6, from four clinical samples originating from four different patients. Different plasmids carry segments that align to different parts of the blaNDM region found on Acinetobacter plasmids. pKP1-NDM-1 and pEC2-NDM-3, from Klebsiella pneumoniae and Escherichia coli, respectively, were identified as type 1 IncA/C2 plasmids with almost identical backbones. Different regions carrying blaNDM are inserted in different locations in the antibiotic resistance island known as ARI-A, and ISCR1 may have been involved in the acquisition of blaNDM-3 by pEC2-NDM-3. pECL3-NDM-1 and pEC4-NDM-6, from Enterobacter cloacae and E. coli, respectively, have similar IncFIIY backbones, but different regions carrying blaNDM are found in different locations. Tn3-derived inverted-repeat transposable elements (TIME) appear to have been involved in the acquisition of blaNDM-6 by pEC4-NDM-6 and the rmtC 16S rRNA methylase gene by IncFIIY plasmids. Characterization of these plasmids further demonstrates that even very closely related plasmids may have acquired blaNDM genes by different mechanisms. These findings also illustrate the complex relationships between antimicrobial resistance genes, transposable elements, and plasmids and provide insights into the possible routes for transmission of blaNDM genes among species of the Enterobacteriaceae family

EphA2 is a functional receptor for the growth factor progranulin.

Although the growth factor progranulin was discovered more than two decades ago, the functional receptor remains elusive. Here, we discovered that EphA2, a member of the large family of Ephrin receptor tyrosine kinases, is a functional signaling receptor for progranulin. Recombinant progranulin bound with high affinity to EphA2 in both solid phase and solution. Interaction of progranulin with EphA2 caused prolonged activation of the receptor, downstream stimulation of mitogen-activated protein kinase and Akt, and promotion of capillary morphogenesis. Furthermore, we found an autoregulatory mechanism of progranulin whereby a feed-forward loop occurred in an EphA2-dependent manner that was independent of the endocytic receptor sortilin. The discovery of a functional signaling receptor for progranulin offers a new avenue for understanding the underlying mode of action of progranulin in cancer progression, tumor angiogenesis, and perhaps neurodegenerative diseases

Protocol for the Foot in Juvenile Idiopathic Arthritis trial (FiJIA): a randomised controlled trial of an integrated foot care programme for foot problems in JIA

&lt;b&gt;Background&lt;/b&gt;: Foot and ankle problems are a common but relatively neglected manifestation of juvenile idiopathic arthritis. Studies of medical and non-medical interventions have shown that clinical outcome measures can be improved. However existing data has been drawn from small non-randomised clinical studies of single interventions that appear to under-represent the adult population suffering from juvenile idiopathic arthritis. To date, no evidence of combined therapies or integrated care for juvenile idiopathic arthritis patients with foot and ankle problems exists. &lt;b&gt;Methods/design&lt;/b&gt;: An exploratory phase II non-pharmacological randomised controlled trial where patients including young children, adolescents and adults with juvenile idiopathic arthritis and associated foot/ankle problems will be randomised to receive integrated podiatric care via a new foot care programme, or to receive standard podiatry care. Sixty patients (30 in each arm) including children, adolescents and adults diagnosed with juvenile idiopathic arthritis who satisfy the inclusion and exclusion criteria will be recruited from 2 outpatient centres of paediatric and adult rheumatology respectively. Participants will be randomised by process of minimisation using the Minim software package. The primary outcome measure is the foot related impairment measured by the Juvenile Arthritis Disability Index questionnaire's impairment domain at 6 and 12 months, with secondary outcomes including disease activity score, foot deformity score, active/limited foot joint counts, spatio-temporal and plantar-pressure gait parameters, health related quality of life and semi-quantitative ultrasonography score for inflammatory foot lesions. The new foot care programme will comprise rapid assessment and investigation, targeted treatment, with detailed outcome assessment and follow-up at minimum intervals of 3 months. Data will be collected at baseline, 6 months and 12 months from baseline. Intention to treat data analysis will be conducted. A full health economic evaluation will be conducted alongside the trial and will evaluate the cost effectiveness of the intervention. This will consider the cost per improvement in Juvenile Arthritis Disability Index, and cost per quality adjusted life year gained. In addition, a discrete choice experiment will elicit willingness to pay values and a cost benefit analysis will also be undertaken

Reaction-kinetics of organo-clay hybrid films: in-situ IRRAS and AFM studies

In this paper we have reported the reaction kinetics of nano dimensional clay saponite and hectorite with an amphiphilic cation octadecyl rhodamine B (RhB) in hybrid Langmuir monolayer at the air-water interface. The surface pressure-molecular area (pi-A) isotherms were strongly influenced by the presence of clay with the lift-off area of the cationic amphiphile shifted to progressively larger area. In-situ infrared reflection absorption spectroscopy (IRRAS) was used to demonstrate the reaction kinetics. Time taken to complete the reaction kinetics for RhB-hectorite hybrid films is larger than RhB-saponite hybrid films. Atomic force microscopic images of hybrid Langmuir-Blodgett films give compelling visual evidence of the incorporation of clay platelets into the hybrid films and density of which increases with the progress of reaction kinetics.Comment: 11 pages, 5 figure

Policy challenges for the pediatric rheumatology workforce: Part III. the international situation

Survival dominates current pediatric global health priorities. Diseases of poverty largely contribute to overall mortality in children under 5 years of age. Infectious diseases and injuries account for 75% of cause-specific mortality among children ages 5-14 years. Twenty percent of the world's population lives in extreme poverty (income below US $1.25/day). Within this population, essential services and basic needs are not met, including clean water, sanitation, adequate nutrition, shelter, access to health care, medicines and education. In this context, musculoskeletal disease comprises 0.1% of all-cause mortality in children ages 5-14 years. Worldwide morbidity from musculoskeletal disease remains generally unknown in the pediatric age group. This epidemiologic data is not routinely surveyed by international agencies, including the World Health Organization. The prevalence of pediatric rheumatic diseases based on data from developed nations is in the range of 2,500 - 3,000 cases per million children. Developing countries' needs for musculoskeletal morbidity are undergoing an epidemiologic shift to chronic conditions, as leading causes of pediatric mortality are slowly quelled

Exploring modifiable risk factors for premature birth in the context of COVID-19 mitigation measures: A discussion paper

© 2020 Elsevier Ltd. All rights reserved. This manuscript is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International Licence http://creativecommons.org/licenses/by-nc-nd/4.0/.During the COVID-19 pandemic, parents with sick or premature babies have faced challenges following admission to a neonatal unit due to the imposed lock-down restrictions on social contact, hospital visitation and the wearing of personal protective equipment. The negative short-term impact on neonatal care in relation to the prevention of close proximity, contact and bonding between parents and babies is potentially significant. However, an interesting finding has been reported of a reduction in premature birth admissions to the neonatal intensive care unit during the pandemic, raising important questions. Why was this? Was it related to the effect of the modifiable risk-factors for premature birth? This discussion paper focuses on an exploration of these factors in the light of the potential impact of COVID-19 restrictions on neonatal care. After contextualising both the effect of premature birth and the pandemic on neonatal and parental short-term outcomes, the discussion turns to the modifiable risk-factors for premature birth and makes recommendations relevant to the education, advice and care given to expectant mothers.Peer reviewe

Atlantoaxial subluxation as an early manifestation in an adolescent with undifferentiated spondyloarthritis: a case report and review of the literature

<p>Abstract</p> <p>Introduction</p> <p>Atlantoaxial instability has been described as a manifestation of ankylosing spondylitis (juvenile and adult onset), reactive arthritis, juvenile idiopathic arthritis, and rheumatoid arthritis; however, it has rarely been reported as an early manifestation of these disorders. We present this case report to increase awareness of the condition in the hope that earlier recognition of this disease may prevent further serious injury.</p> <p>Case presentation</p> <p>We report the case of a 17-year-old Hispanic adolescent woman who was initially diagnosed with undifferentiated spondyloarthritis due to peripheral arthritis, enthesitis, a positive human leukocyte antigen B27 result, and inflammatory spinal pain lasting two months. Our patient experienced persistent and worsening occipitocervical pain and signs of myelopathy three months after diagnosis; consequently, we found atlantoaxial instability along with cervical spine bone erosion and pannus formation. She was treated surgically with a C1-2 posterior instrumented fusion and at six weeks post-operatively was started on tumor necrosis factor α blockade. Her occipitocervical symptoms subsided following surgery and initiation of immunomodulation.</p> <p>Conclusions</p> <p>Our report serves to emphasize to pediatric and adult general practitioners, pediatricians, internists, family physicians, pediatric and adult rheumatologists and spine surgeons that atlantoaxial subluxation may be an early manifestation of spondyloarthritis, and that the condition is treatable by surgical intervention and immunomodulation.</p