Emission heights of coronal bright points on Fe XII radiance map

We study the emission heights of the coronal bright points (BPs) above the photosphere in the bipolar magnetic loops that are apparently associated with them. As BPs are seen in projection against the disk their true emission heights are unknown. The correlation of the BP locations on the Fe XII radiance map from EIT with the magnetic field features (in particular neutral lines) was investigated in detail. The coronal magnetic field was determined by an extrapolation of the photospheric field to different altitudes above the disk. It was found that most BPs sit on or near a photospheric neutral line, but that the emission occurs at a height of about 5 Mm. Some BPs, while being seen in projection, still seem to coincide with neutral lines, although their emission takes place at heights of more than 10 Mm. Such coincidences almost disappear for emissions above 20 Mm. We also projected the upper segments of the 3-D magnetic field lines above different heights, respectively, on to the x-y plane. The shape of each BP was compared with the respective field-line segment nearby. This comparison suggests that most coronal BPs are actually located on the top of their associated magnetic loops. Finally, we calculated for each selected BP region the correlation coefficient between the Fe XII intensity enhancement and the horizontal component of the extrapolated magnetic field vector at the same x-y position in planes of different heights, respectively. We found that for almost all the BP regions we studied the correlation coefficient, with increasing height, increases to a maximal value and then decreases again. The height corresponding to this maximum was defined as the correlation height, which for most bright points was found to range below 20 Mm.Comment: 7 pages, 4 figures, 1 tabl

N rf2‐Mediated Resistance to Oxidant‐Induced Redox Disruption in Embryos

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/92129/1/bdrb21005.pd

New views on the emission and structure of the solar transition region

The Sun is the only star that we can spatially resolve and it can be regarded as a fundamental plasma laboratory of astrophysics. The solar transition region (TR), the layer between the solar chromosphere and corona, plays an important role in solar wind origin and coronal heating. Recent high-resolution observations made by SOHO, TRACE, and Hinode indicate that the TR is highly nonuniform and magnetically structured. Through a combination of spectroscopic observations and magnetic field extrapolations, the TR magnetic structures and plasma properties have been found to be different in coronal holes and in the quiet Sun. In active regions, the TR density and temperature structures also differ in sunspots and the surrounding plage regions. Although the TR is believed to be a dynamic layer, quasi-steady flows lasting from several hours to several days are often present in the quiet Sun, coronal holes, and active regions, indicating some kind of plasma circulation/convection in the TR and corona. The emission of hydrogen Lyman lines, which originates from the lower TR, has also been intensively investigated in the recent past. Observations show clearly that the flows and dynamics in the middle and upper TR can greatly modify the Lyman line profiles.Comment: This paper has been withdrawn by the authors. This is a repetition of another record in ADS: New Astronomy Reviews, Volume 54, Issue 1-2, p. 13-3

Tissue Equivalent Curved Organic X-ray Detectors Utilizing High Atomic Number Polythiophene Analogues

Organic semiconductors are a promising material candidate for X-ray detection. However, the low atomic number (Z) of organic semiconductors leads to poor X-ray absorption thus restricting their performance. Herein, the authors propose a new strategy for achieving high-sensitivity performance for X-ray detectors based on organic semiconductors modified with high –Z heteroatoms. X-ray detectors are fabricated with p-type organic semiconductors containing selenium heteroatoms (poly(3-hexyl)selenophene (P3HSe)) in blends with an n-type fullerene derivative ([6,6]-Phenyl C71 butyric acid methyl ester (PC70BM). When characterized under 70, 100, 150, and 220 kVp X-ray radiation, these heteroatom-containing detectors displayed a superior performance in terms of sensitivity up to 600 ± 11 nC Gy−1 cm−2 with respect to the bismuth oxide (Bi2O3) nanoparticle (NP) sensitized organic detectors. Despite the lower Z of selenium compared to the NPs typically used, the authors identify a more efficient generation of electron-hole pairs, better charge transfer, and charge transport characteristics in heteroatom-incorporated detectors that result in this breakthrough detector performance. The authors also demonstrate flexible X-ray detectors that can be curved to a radius as low as 2 mm with low deviation in X-ray response under 100 repeated bending cycles while maintaining an industry-standard ultra-low dark current of 0.03 ± 0.01 pA mm−2

Tissue Equivalent Curved Organic X-ray Detectors Utilizing High Atomic Number Polythiophene Analogues

Organic semiconductors are a promising material candidate for X-ray detection. However, the low atomic number (Z) of organic semiconductors leads to poor X-ray absorption thus restricting their performance. Herein, the authors propose a new strategy for achieving high-sensitivity performance for X-ray detectors based on organic semiconductors modified with high –Z heteroatoms. X-ray detectors are fabricated with p-type organic semiconductors containing selenium heteroatoms (poly(3-hexyl)selenophene (P3HSe)) in blends with an n-type fullerene derivative ([6,6]-Phenyl C71 butyric acid methyl ester (PC70BM). When characterized under 70, 100, 150, and 220 kVp X-ray radiation, these heteroatom-containing detectors displayed a superior performance in terms of sensitivity up to 600 ± 11 nC Gy−1 cm−2 with respect to the bismuth oxide (Bi2O3) nanoparticle (NP) sensitized organic detectors. Despite the lower Z of selenium compared to the NPs typically used, the authors identify a more efficient generation of electron-hole pairs, better charge transfer, and charge transport characteristics in heteroatom-incorporated detectors that result in this breakthrough detector performance. The authors also demonstrate flexible X-ray detectors that can be curved to a radius as low as 2 mm with low deviation in X-ray response under 100 repeated bending cycles while maintaining an industry-standard ultra-low dark current of 0.03 ± 0.01 pA mm−2

In situ evidence for the structure of the magnetic null in a 3D reconnection event in the Earth's magnetotail

Magnetic reconnection is one of the most important processes in astrophysical, space and laboratory plasmas. Identifying the structure around the point at which the magnetic field lines break and subsequently reform, known as the magnetic null point, is crucial to improving our understanding reconnection. But owing to the inherently three-dimensional nature of this process, magnetic nulls are only detectable through measurements obtained simultaneously from at least four points in space. Using data collected by the four spacecraft of the Cluster constellation as they traversed a diffusion region in the Earth's magnetotail on 15 September, 2001, we report here the first in situ evidence for the structure of an isolated magnetic null. The results indicate that it has a positive-spiral structure whose spatial extent is of the same order as the local ion inertial length scale, suggesting that the Hall effect could play an important role in 3D reconnection dynamics.Comment: 14 pages, 4 figure

Genome-wide studies of the multi-zinc finger Drosophila Suppressor of Hairy-wing protein in the ovary

The Drosophila Suppressor of Hairy-wing [Su(Hw)] protein is a globally expressed, multi-zinc finger (ZnF) DNA-binding protein. Su(Hw) forms a classic insulator when bound to the gypsy retrotransposon and is essential for female germline development. These functions are genetically separable, as exemplified by Su(Hw)f that carries a defective ZnF10, causing a loss of insulator but not germline function. Here, we completed the first genome-wide analysis of Su(Hw)-binding sites (SBSs) in the ovary, showing that tissue-specific binding is not responsible for the restricted developmental requirements for Su(Hw). Mapping of ovary Su(Hw)f SBSs revealed that female fertility requires binding to only one third of the wild-type sites. We demonstrate that Su(Hw)f retention correlates with binding site affinity and partnership with Modifier of (mdg4) 67.2 protein. Finally, we identify clusters of co-regulated ovary genes flanked by Su(Hw)f bound sites and show that loss of Su(Hw) has limited effects on transcription of these genes. These data imply that the fertility function of Su(Hw) may not depend upon the demarcation of transcriptional domains. Our studies establish a framework for understanding the germline Su(Hw) function and provide insights into how chromatin occupancy is achieved by multi-ZnF proteins, the most common transcription factor class in metazoans

Electrical conductivity properties of expanded graphite-polycarbonatediol polyurethane composites

Conductive polymer composites of segmented polycarbonatediol polyurethane and expanded graphite (EG) have been synthesized with different amounts of EG conductive filler (from 0 to 50wt%). SEM, X-ray diffraction measurements, Fourier transform infrared and Raman spectroscopies demonstrated a homogeneous dispersion of the EG filler in the matrix. The dielectric permittivity of the composites showed an insulator to conductor percolation transition with increase in EG content. Significant changes in the dielectric permittivity take place when the weight fraction of EG is in the range 20-30wt%. Special attention has been paid to the dependence of the conductivity on frequency, temperature and EG content. The addition of EG to the matrix causes a dramatic increase in the electrical conductivity of 10 orders of magnitude, which is an indication of percolative behavior. A percolation threshold of ca 30wt% was evaluated by using the scaling law of percolation theoryThis work was financially supported by the DGCYT through Grant MAT2012-33483.Redondo Foj, MB.; Ortiz Serna, MP.; Carsí Rosique, M.; Sanchis Sánchez, MJ.; Culebras, M.; Gómez, CM.; Cantarero, A. (2015). Electrical conductivity properties of expanded graphite-polycarbonatediol polyurethane composites. Polymer International. 64(2):284-292. https://doi.org/10.1002/pi.4788S28429264

Functional Biogeography as Evidence of Gene Transfer in Hypersaline Microbial Communities

We are grateful to David Naftz and the United States Geological Survey for access to sampling sites, Chris Garrard and Robert Baskin for geospatial images, and Ethan White for statistical input.Conceived and designed the experiments: JJP GR MEP BCW. Performed the experiments: JJP GR JDVN. Analyzed the data: JJP LCL MEP JDVN BG. Contributed reagents/materials/analysis tools: JJP GR LCL MEP JDVN ZH JZ GLA BCW. Wrote the paper: JJP MEP PC BCW.BackgroundHorizontal gene transfer (HGT) plays a major role in speciation and evolution of bacteria and archaea by controlling gene distribution within an environment. However, information that links HGT to a natural community using relevant population-genetics parameters and spatial considerations is scarce. The Great Salt Lake (Utah, USA) provides an excellent model for studying HGT in the context of biogeography because it is a contiguous system with dispersal limitations due to a strong selective salinity gradient. We hypothesize that in spite of the barrier to phylogenetic dispersal, functional characteristics—in the form of HGT—expand beyond phylogenetic limitations due to selective pressure.Methodology and ResultsTo assay the functional genes and microorganisms throughout the GSL, we used a 16S rRNA oligonucleotide microarray (Phylochip) and a functional gene array (GeoChip) to measure biogeographic patterns of nine microbial communities. We found a significant difference in biogeography based on microarray analyses when comparing Sørensen similarity values for presence/absence of function and phylogeny (Student's t-test; p = 0.005).Conclusion and SignificanceBiogeographic patterns exhibit behavior associated with horizontal gene transfer in that informational genes (16S rRNA) have a lower similarity than functional genes, and functional similarity is positively correlated with lake-wide selective pressure. Specifically, high concentrations of chromium throughout GSL correspond to an average similarity of chromium resistance genes that is 22% higher than taxonomic similarity. This suggests active HGT may be measured at the population level in microbial communities and these biogeographic patterns may serve as a model to study bacteria adaptation and speciation.Yeshttp://www.plosone.org/static/editorial#pee

Tissue equivalent curved organic x‐ray detectors utilizing high atomic number polythiophene analogues

Organic semiconductors are a promising material candidate for X-ray detection. However, the low atomic number (Z) of organic semiconductors leads to poor X-ray absorption thus restricting their performance. Herein, the authors propose a new strategy for achieving high-sensitivity performance for X-ray detectors based on organic semiconductors modified with high –Z heteroatoms. X-ray detectors are fabricated with p-type organic semiconductors containing selenium heteroatoms (poly(3-hexyl)selenophene (P3HSe)) in blends with an n-type fullerene derivative ([6,6]-Phenyl C71 butyric acid methyl ester (PC70BM). When characterized under 70, 100, 150, and 220 kVp X-ray radiation, these heteroatom-containing detectors displayed a superior performance in terms of sensitivity up to 600 ± 11 nC Gy−1 cm−2 with respect to the bismuth oxide (Bi2O3) nanoparticle (NP) sensitized organic detectors. Despite the lower Z of selenium compared to the NPs typically used, the authors identify a more efficient generation of electron-hole pairs, better charge transfer, and charge transport characteristics in heteroatom-incorporated detectors that result in this breakthrough detector performance. The authors also demonstrate flexible X-ray detectors that can be curved to a radius as low as 2 mm with low deviation in X-ray response under 100 repeated bending cycles while maintaining an industry-standard ultra-low dark current of 0.03 ± 0.01 pA mm−2