32 research outputs found
Observation of Non-isotropic Auger Angular Distribution in the C(1s) Shape Resonance of CO
Angle-resolved high-resolution C(KVV) Auger spectra of CO were taken in the vicinity of the C(1s) σ* shape resonance. These spectra show clear evidence for the theoretically predicted anisotropic K-shell Auger emission in molecules. Complementary results from angle-resolved photoion spectroscopy show that the small size of the observed effect is, besides the varying intrinsic anisotropy of the Auger decay, also due to a smaller anisotropy in the primary absorption process than originally predicted but in good agreement with more recent calculations. Contrary to this, satellite Auger transitions show unexpectedly large anisotropies
Electron-Energy and –Angular Distributions in the Double Photoionization of Helium
Photoelectron spectra of helium have been measured at different angles and at various energies above the double-ionization threshold up to 120 eV to investigate the behavior of the energy and angular distributions, of shake-off electrons. Both energy and angular distributions clearly show a U-shaped profile which turns to a flat curve near threshold pointing to a uniform intensity distribution over the kinetic energy for all angles in this excitation energy regime. Our results for the angular-distribution asymmetry parameter indicate qualitative agreement with theoretical predictions but fail to provide them quantitatively
Kinetic-Energy- and Angular-Resolved Fragmentation of CO in Vibrational-Resolved C 1s Excitation
Angular distributions of C++O+ from CO were measured, following vibrationally resolved C 1s excitations into the 2pπ, 3sσ, and 3pπ orbitals as well as into higher unresolved orbitals. A time-of-flight mass spectrometer, with a multihit-type position-sensitive anode, was used for the measurements. The anisotropy parameters (β) of C++O+ approach their theoretically expected values as the released kinetic energy in the fragmentation increases. The value of the β parameters remains constant for all vibrational states within each orbital
Vibrational-State-Dependent Decay of the CO C(1s) Excitation
Molecular ionization and ionic fragmentation of core excited CO valence and Rydberg states are studied by partial-ion-yield spectroscopy at vibrational resolution. The vibrational intensities of the Rydberg excitations differ significantly depending on the ionization and/or fragmentation channel. The observed intensity variations are explained by nondissociative excited final ionic states of the subsequent molecular Auger decay. The vibrational levels of these final states become selectively depopulated due to interaction with dissociative decay channels leading to ionic fragmentation
Recommended from our members
Immobilization of sodium nitrate waste with polymers: Topical report
This report describes the development of solidification systems for sodium nitrate waste. Sodium nitrate waste was solidified in the polymers polyethylene, polyester-styrene (PES), and water-extendible polyester-styrene (WEP). Evaluations were made of the properties of waste forms containing various amounts of sodium nitrate by leaching immersion in water, measuring compressive strengths and by the EPA Extraction Procedure. Results of the leaching test are presented as cumulative fraction leached (CFL), incremental leaching rate, and average leaching indices (LI). For waste forms containing 30 to 70 wt% sodium nitrate, the CFL ranged from 9.0 x 10/sup -3/ to 7.3 x 10/sup -1/ and the LI from 11 to 7.8. After ninety days immersion in water, the compressive strengths ranged from 720 psi to 2550 psi. The nitrate releases from these samples using the EPA Extraction Procedure were below 500 ppM. The nitrate releases from PES waste forms were similar to those from polyethylene waste forms at the same waste loadings. The compressive yield strengths, measured after ninety-day immersion in water, ranged between 2070 and 7710 psi. In the case of WEP waste forms, only 30 wt% loaded samples passed the immersion test. 23 refs., 24 figs., 12 tabs
Recommended from our members
Solidification of DOE problem wastes
Sodium nitrate waste has been successfully solidified in two types of polymeric materials: polyethylene, a thermoplastic material, and polyester styrene (PES), a thermosetting material. Waste form property evaluation tests such as ANS 16.1 leaching test and compressive strength measurements were performed on the waste forms containing various amounts of sodium nitrate. A single-screw extruder was employed for incorporating dry waste into polyethylene at its melt temperature of 120/sup 0/C to produce a homogenous mixture. Results of the leaching test for polyethylene waste forms containing 30, 50, 60 and 70 wt% sodium nitrate are presented as cumulative fraction leached and leaching indices ranging from 11 to 7.8. Two PES systems are discussed. The first is for solidification of dry salt wastes and the second is a water extendible system that is compatible with wet waste streams. Leaching data for PES and water extendible PES waste forms containing 30 wt% sodium nitrate are presented as cumulative fraction leached and leaching indices of approximately 9. Results from compressive strength measurements are also included
Angle-Resolved Photoelectron Spectroscopy of C60
Angle-resolved photoelectron spectra of gaseous C60 were recorded in the photon energy regions from 21 to 108 eV and from 295 to 320 eV. Partial cross sections σ and the angular distribution anisotropy parameter β vary significantly with photon energy, particularly in the near-threshold region of the valence and the core ionization regimes. Some of these effects may be attributed to scattering of the outgoing photoelectron by the atoms of the ionized C60 molecule. Our results indicate that the observed satellites of the C(1s) main line are most likely of shake-up character. Low-energy electrons emitted below the shake-off threshold indicate the occurrence of K-shell vacancy filling double Auger decay
Imitation of hand and tool actions is effector-independent
Following the theoretical notion that tools often extend one’s body, in the present study, we investigated whether imitation of hand or tool actions is modulated by effector-specific information. Subjects performed grasping actions toward an object with either a handheld tool or their right hand. Actions were initiated in response to pictures representing a grip at an object that could be congruent or incongruent with the required action (grip-type congruency). Importantly, actions could be cued by means of a tool cue, a hand cue, and a symbolic cue (effector-type congruency). For both hand and tool actions, an action congruency effect was observed, reflected in faster reaction times if the observed grip type was congruent with the required movement. However, neither hand actions nor tool actions were differentially affected by the effector represented in the picture (i.e., when performing a tool action, the action congruency effect was similar for tool cues and hand cues). This finding suggests that imitation of hand and tool actions is effector-independent and thereby supports generalist rather than specialist theories of imitation
Biological flora of Central Europe: Cyperus esculentus L
This paper presents information on all aspects of the biology of Cyperus esculentus L. (yellow nutsedge) and deals with its taxonomy, morphology, genetic diversity, distribution, habitat requirements, ecology and life cycle, with special emphasis on uses and cultivation, history of introduction, impact and management in Europe. C. esculentus is a tuber geophyte and most likely originates from the Mediterranean and Southwest Asia. It is a variable plant and four wild-type varieties are presently recognized, in addition
to a cultivated form. C. esculentus reproduces primarily by its underground tubers, although abundant seeds are produced. In temperate climates, tubers usually sprout in late spring and the plant withers at the beginning of the winter. C. esculentus is only cultivated in the València region in Spain. Invasion foci emerged across Europe at the beginning of the 1980s and at present, C. esculentus is most abundant on arable land and in ruderal habitats, followed by riverine vegetation. In heavily infested regions of Europe, C. esculentus causes substantial yield losses in field crops and although different management strategies are available, C. esculentus remains difficult to control.Follak, S.; Belz, R.; Bohren, C.; Castro, OD.; Guacchio, ED.; Pascual-Seva, N.; Schwarz, M.... (2016). Biological flora of Central Europe: Cyperus esculentus L. Perspectives in Plant Ecology, Evolution and Systematics. 23:33-51. doi:10.1016/j.ppees.2016.09.003S33512