Hydrokinetic energy exploitation under combined river and tidal flow

Hydrokinetic energy has been mainly studied in areas where the principal driver of the current is the tide. However, in certain areas river discharges play also a principal role. The exploitation of the hydrokinetic resource in such areas has its own peculiarities, dictated by the combined influence of the two driving agents. The objective of this paper is to investigate the exploitation of hydrokinetic energy in the Miño Estuary, the largest estuary in NW Spain and N Portugal, with a focus on the site-specific performance of hydrokinetic energy converters (HECs) and its intra-annual variability. A state-of-the-art hydrodynamics numerical model is implemented and successfully validated based on field data. A third-generation HEC—to be more specific, the new Smart Freestream Turbine (SFT)—is considered, and its performance at the location with the greatest potential is assessed by means of: (i) site-specific efficiency, (ii) availability factor, and (iii) capacity factor. We find that, whereas the site-specific efficiency does not vary significantly, the availability and capacity factors do experience substantial intra-annual (seasonal) variability. In summer and autumn, river discharges are low, and the tide dominates the hydrokinetic resource. In contrast, during winter and spring, the river discharges significantly contribute to the resource, leading to a considerable increase in the availability and capacity factors. More generally, the results imply that in areas subject to combined fluvial and tidal influences the performance of HECs may depart significantly from that in tide-dominated areas, and this departure must be carefully weighed in assessing a project

Performance of Glass Resistive Plate Chambers for a high granularity semi-digital calorimeter

A new design of highly granular hadronic calorimeter using Glass Resistive Plate Chambers (GRPCs) with embedded electronics has been proposed for the future International Linear Collider (ILC) experiments. It features a 2-bit threshold semi-digital read-out. Several GRPC prototypes with their electronics have been successfully built and tested in pion beams. The design of these detectors is presented along with the test results on efficiency, pad multiplicity, stability and reproducibility.Comment: 16 pages, 15 figure

Construction and commissioning of a technological prototype of a high-granularity semi-digital hadronic calorimeter

A large prototype of 1.3m3 was designed and built as a demonstrator of the semi-digital hadronic calorimeter (SDHCAL) concept proposed for the future ILC experiments. The prototype is a sampling hadronic calorimeter of 48 units. Each unit is built of an active layer made of 1m2 Glass Resistive Plate Chamber(GRPC) detector placed inside a cassette whose walls are made of stainless steel. The cassette contains also the electronics used to read out the GRPC detector. The lateral granularity of the active layer is provided by the electronics pick-up pads of 1cm2 each. The cassettes are inserted into a self-supporting mechanical structure built also of stainless steel plates which, with the cassettes walls, play the role of the absorber. The prototype was designed to be very compact and important efforts were made to minimize the number of services cables to optimize the efficiency of the Particle Flow Algorithm techniques to be used in the future ILC experiments. The different components of the SDHCAL prototype were studied individually and strict criteria were applied for the final selection of these components. Basic calibration procedures were performed after the prototype assembling. The prototype is the first of a series of new-generation detectors equipped with a power-pulsing mode intended to reduce the power consumption of this highly granular detector. A dedicated acquisition system was developed to deal with the output of more than 440000 electronics channels in both trigger and triggerless modes. After its completion in 2011, the prototype was commissioned using cosmic rays and particles beams at CERN.Comment: 49 pages, 41 figure

Pion and proton showers in the CALICE scintillator-steel analogue hadron calorimeter

Showers produced by positive hadrons in the highly granular CALICE scintillator-steel analogue hadron calorimeter were studied. The experimental data were collected at CERN and FNAL for single particles with initial momenta from 10 to 80 GeV/c. The calorimeter response and resolution and spatial characteristics of shower development for proton- and pion-induced showers for test beam data and simulations using Geant4 version 9.6 are compared.Comment: 26 pages, 16 figures, JINST style, changes in the author list, typos corrected, new section added, figures regrouped. Accepted for publication in JINS

Shower development of particles with momenta from 15 GeV to 150 GeV in the CALICE scintillator-tungsten hadronic calorimeter

We present a study of showers initiated by electrons, pions, kaons, and protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE scintillator-tungsten analogue hadronic calorimeter. The data were recorded at the CERN Super Proton Synchrotron in 2011. The analysis includes measurements of the calorimeter response to each particle type as well as measurements of the energy resolution and studies of the longitudinal and radial shower development for selected particles. The results are compared to Geant4 simulations (version 9.6.p02). In the study of the energy resolution we include previously published data with beam momenta from 1 GeV to 10 GeV recorded at the CERN Proton Synchrotron in 2010.Comment: 35 pages, 21 figures, 8 table

Bottlenecks in diagnostics of Mediterranean fish diseases

Three independent Horizon 2020 projects are prioritising a common task of solving diagnostic issues using different approaches and strategies. PerformFISH focuses its research objectives on diagnostic methods, MedAID has prepared a diagnostic manual for the most devastating fish diseases of the Mediterranean and ParaFishControl has prepared a diagnostic manual on parasitic diseases of European aquaculture species. Currently, the projects are investing large collaborative efforts to reinforce their tasks and to deliver mutual and cutting-edge material on the subject. Nevertheless, further efforts for the harmonisation, standardisation and validation of diagnostic methods for infectious diseases in Mediterranean aquaculture are needed, involving as many relevant stakeholders and experts as possible. The main goal of the workshop (WS) “Bottlenecks in diagnostics of Mediterranean fish diseases”, organised during the 19th International EAFP conference on Diseases of Fish and Shellfish, was to present results already obtained from the projects and discuss the bottlenecks in diagnostic procedures of target groups of pathogens. The WS provided an ideal environment and opportunity to exchange and discuss experiences and data with international experts in the diagnostic field attending the conference. Interactive discussions on diagnostics for a specific group of pathogens have resulted in highlighting new initiatives needed in the management of diseases in Mediterranean aquaculture. Furthermore, the WS emphasised a need for the establishment of this strong interactive network which will collaborate to receive, collect, compile and analyse all information gathered from different parts of the region.info:eu-repo/semantics/publishedVersio

Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter

A first prototype of a scintillator strip-based electromagnetic calorimeter was built, consisting of 26 layers of tungsten absorber plates interleaved with planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's performance is presented in terms of the linearity and resolution of the energy measurement. These results represent an important milestone in the development of highly granular calorimeters using scintillator strip technology. This technology is being developed for a future linear collider experiment, aiming at the precise measurement of jet energies using particle flow techniques

The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers

The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and depends on the active medium and on the absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15 small plastic scintillator tiles read out with Silicon Photomultipliers, the time structure of showers is measured on a statistical basis with high spatial and temporal resolution in sampling calorimeters with tungsten and steel absorbers. The results are compared to GEANT4 (version 9.4 patch 03) simulations with different hadronic physics models. These comparisons demonstrate the importance of using high precision treatment of low-energy neutrons for tungsten absorbers, while an overall good agreement between data and simulations for all considered models is observed for steel.Comment: 24 pages including author list, 9 figures, published in JINS

Search for the standard model Higgs boson in the H to ZZ to 2l 2nu channel in pp collisions at sqrt(s) = 7 TeV

A search for the standard model Higgs boson in the H to ZZ to 2l 2nu decay channel, where l = e or mu, in pp collisions at a center-of-mass energy of 7 TeV is presented. The data were collected at the LHC, with the CMS detector, and correspond to an integrated luminosity of 4.6 inverse femtobarns. No significant excess is observed above the background expectation, and upper limits are set on the Higgs boson production cross section. The presence of the standard model Higgs boson with a mass in the 270-440 GeV range is excluded at 95% confidence level.Comment: Submitted to JHE

Hadron shower decomposition in the highly granular CALICE analogue hadron calorimeter

The spatial development of hadronic showers in the CALICE scintillator-steel analogue hadron calorimeter is studied using test beam data collected at CERN and FNAL for single positive pions and protons with initial momenta in the range from 10 to 80 GeV/c. Both longitudinal and radial development of hadron showers are parametrised with two-component functions. The parametrisation is fit to test beam data and simulations using the QGSP_BERT and FTFP_BERT physics lists from Geant4 version 9.6. The parameters extracted from data and simulated samples are compared for the two types of hadrons. The response to pions and the ratio of the non-electromagnetic to the electromagnetic calorimeter response, h/e, are estimated using the extrapolation and decomposition of the longitudinal profiles.Comment: 38 pages, 19 figures, 5 tables; author list changed; submitted to JINS