74 research outputs found
Procedures for the Establishment of Standards. Final Report. Vol.2
This final report summarizes two years of research on analyzing procedures for the establishment of standards. The research was sponsored by the Volkswagenwerk Foundation and jointly carried out at the International Institute for Applied Systems Analysis at Laxenburg and the Kernforschungszentrum Karlsruhe. The final report is meant to be both a problem-oriented review of related work in the area of environmental standard setting and an executive summary of the main research done during the contract period. The following eleven technical papers (Volume II of the Final Report) are reference reports written to accompany Volume I. They describe the studies and findings performed under the contract in more detail, and they have been either published as IIASA Research Memoranda or as outside publications, or were especially written for this report. These technical reports are structured in four parts: (1) policy analyses of standard setting procedures; (2) decision and game theoretic models for standard setting; (3) applications of decision game theoretic models to specific standard setting problems; and (4) biological basis for standard setting
Stopping and Radial Flow in Central 58Ni + 58Ni Collisions between 1 and 2 AGeV
The production of charged pions, protons and deuterons has been studied in
central collisions of 58Ni on 58Ni at incident beam energies of 1.06, 1.45 and
1.93 AGeV. The dependence of transverse-momentum and rapidity spectra on the
beam energy and on the centrality of the collison is presented. It is shown
that the scaling of the mean rapidity shift of protons established for AGS and
SPS energies is valid down to 1 AGeV. The degree of nuclear stopping is
discussed; the IQMD transport model reproduces the measured proton rapidity
spectra for the most central events reasonably well, but does not show any
sensitivity between the soft and the hard equation of state (EoS). A radial
flow analysis, using the midrapidity transverse-momentum spectra, delivers
freeze-out temperatures T and radial flow velocities beta_r which increase with
beam energy up to 2 AGeV; in comparison to existing data of Au on Au over a
large range of energies only beta_r shows a system size dependence
K^+ production in the reaction at incident energies from 1 to 2 AGeV
Semi-inclusive triple differential multiplicity distributions of positively
charged kaons have been measured over a wide range in rapidity and transverse
mass for central collisions of Ni with Ni nuclei. The transverse
mass () spectra have been studied as a function of rapidity at a beam
energy 1.93 AGeV. The distributions of K^+ mesons are well described by a
single Boltzmann-type function. The spectral slopes are similar to that of the
protons indicating that rescattering plays a significant role in the
propagation of the kaon. Multiplicity densities have been obtained as a
function of rapidity by extrapolating the Boltzmann-type fits to the measured
distributions over the remaining phase space. The total K^+ meson yield has
been determined at beam energies of 1.06, 1.45, and 1.93 AGeV, and is presented
in comparison to existing data. The low total yield indicates that the K^+
meson can not be explained within a hadro-chemical equilibrium scenario,
therefore indicating that the yield does remain sensitive to effects related to
its production processes such as the equation of state of nuclear matter and/or
modifications to the K^+ dispersion relation.Comment: 24 pages Latex (elsart) 7 PS figures to be submitted to Nucl. Phys
A physical supply-use table framework for energy analysis on the energy conversion chain
In response to the oil crises of the 1970s, energy accounting experienced a revolution and became the much broader field of energy analysis, in part by expanding along the energy conversion chain from primary and final energy to useful energy and energy services, which satisfy human needs. After evolution and specialization, the field of energy analysis today addresses topics along the entire energy conversion chain, including energy conversion systems, energy resources, carbon emissions, and the role of energy services in promoting human well-being and development. And the expanded field would benefit from a common analysis framework that provides data structure uniformity and methodological consistency.
Building upon recent advances in related fields, we propose a physical supply-use table energy analysis framework consisting of four matrices from which the input-output structure of an energy conversion chain can be determined and the effects of changes in final demand can be estimated. Real-world examples demonstrate the physical supply-use table framework via investigation of energy analysis questions for a United Kingdom energy conversion chain.
The physical supply use table framework has two key methodological advances over the building blocks that precede it, namely extending a common energy analysis framework through to energy services and application of physical supply-use tables to both energy and exergy analysis. The methodological advances enable the following first-time contributions to the literature: (1) performing energy and exergy analyses on an energy conversion chain using physical supply-use table matrices comprised of disaggregated products in physical units when the last stage is any of final energy, useful energy, or energy services; (2) performing structural path analysis on an energy conversion chain; and (3) developing and utilizing a matrix approach to inhomogeneous units. The framework spans the entire energy conversion chain and is suitable for many sub-fields of energy analysis, including net energy analysis, societal energy analysis, human needs and well-being, and structural path analysis, all of which are explored in this paper
Central Collisions of Au on Au at 150, 250 and 400 A MeV
Collisions of Au on Au at incident energies of 150, 250 and 400 A MeV were
studied with the FOPI-facility at GSI Darmstadt. Nuclear charge (Z < 16) and
velocity of the products were detected with full azimuthal acceptance at
laboratory angles of 1-30 degrees. Isotope separated light charged particles
were measured with movable multiple telescopes in an angular range of 6-90
degrees. Central collisions representing about 1 % of the reaction cross
section were selected by requiring high total transverse energy, but vanishing
sideflow. The velocity space distributions and yields of the emitted fragments
are reported. The data are analysed in terms of a thermal model including
radial flow. A comparison with predictions of the Quantum Molecular Model is
presented.Comment: LateX text 62 pages, plus six Postscript files with a total of 34
figures, accepted by Nucl.Phys.
Fusion-Fission Hybrid Reactors
to the design of hybrid reactors and to inform the new generation of hybrid reactor researchers of the hybrid reactor data base developed in the seventies and early eighties
Carbon Dioxide Emissions in a Methane Economy
Increasing reliance on natural gas (methane) to meet global energy demands holds implications for atmospheric CO2 concentrations. Analysis of these implications is presented, based on a logistic substitution model viewing energy technologies like biological species invading an econiche and substituting in case of superiority for existing species. This model suggests gas will become the dominant energy source and remain so for 50 years, peaking near 70 percent of world supply. Two scenarios of energy demand are explored, one holding per capita consumption at current levels, the second raising the global average in the year 2100 to the current U.S. level. In the first ("efficiency") scenario concentrations peak about 450 ppm, while in the second ("long wave") they near 600 ppm. Although projected CO2 concentrations in a "methane economy" are low in relation to other scenarios, the projections confirm that global climate warming is likely to be a major planetary concern throughout the twenty-first century. A second finding is that data on past growth of world per capita energy consumption group neatly into two pulses consistent with long-wave theories in economics
Methodical Concept Development of Automotive Thermoelectric Generators (TEG)
Find the best TEG architecture for vehical application, Maximization of the reduction of fuel consumption on a existing vehicle system.
Optimization by variing of all geometrical parameters.
Concept assessment through weighting of the solutions
- …