Dehydration mechanism of a small molecular solid: 5-nitrouracil hydrate

Previous studies of the dehydration of 5-nitrouracil (5NU) have resulted in it being classified as a ‘‘channel hydrate’’ in which dehydration proceeds principally by the exit of the water molecules along channels in the structure. We have re-examined this proposal and found that in fact there are no continuous channels in the 5NU structure that would contribute to such a mechanism. Product water molecules would be immediately trapped in unlinked voids in the crystal structure and would require some additional mechanism to break loose from the crystal. Through a detailed structural analysis of the macro and micro structure of the 5NU as it dehydrates, we have developed a model for the dehydration process based on the observed development of structural defects in the 5NU crystal and the basic crystallography of the material. The model was tested against standard kinetic measurements and found to present a satisfactory account of kinetic observations, thus defining the mechanism. Overall, the study shows the necessity of complementing standard kinetic studies with a parallel macro and micro examination of the dehydrating material when evaluating the mechanisms of dehydration and decomposition processes

Crystal growth of the acentric organic nonlinear optical material methyl-p-hydroxybenzoate : morphological variations in crystals grown by physical vapor transport

Single crystals of the acentric compound methyl-p-hydroxybenzoate were grown by self-nucleation and seeded growth from the vapor phase by the physical vapor transport (PVT) process. In the temperature range of 80-95 °C (nucleation supersaturation 0.97 to 0.88), all crystals were of the polymorphic form as produced by room-temperature solution growth. Self-nucleated crystals varied in macromorphology from columnar to octahedral to skewed octahedral and finally to skewed columnar but retained the same crystal forms indicated by theoretical calculations. Micromorphological studies of growth faces indicated that these variations result from changes in growth mechanisms that influence both the defect structure and perfection of the growing crystal. X-ray topographic studies confirmed that growth under the most ideal conditions, when the dominant faces of the crystals were growing by a dislocation induced Burton, Cabrera, and Frank mechanism, yielded the structurally most perfect crystals. Preliminary studies of seeded growth were performed as a prelude to using PVT for the growth of larger crystals. The seeded growth followed a different pattern of supersaturation dependence. All crystals showed the same asymmetric growth along the polar axis that has come to be regarded as characteristic of these highly polar acentric materials when grown from solution

Directed flow of antiprotons in Au+Au collisions at AGS

Directed flow of antiprotons is studied in Au+Au collisions at a beam momentum of 11.5A GeV/c. It is shown that antiproton directed flow is anti-correlated to proton flow. The measured transverse momentum dependence of the antiproton flow is compared with predictions of the RQMD event generator.Comment: 16 pages, 6 figure

Two-Proton Correlations from 14.6A GeV/c Si+Pb and 11.5A GeV/c Au+Au Central Collisions

Two-proton correlation functions have been measured in Si+Pb collisions at 14.6A GeV/c and Au+Au collisions at 11.5A GeV/c by the E814/E877 collaboration. Data are compared with predictions of the transport model RQMD and the source size is inferred from this comparison. Our analysis shows that, for both reactions, the characteristic size of the system at freeze-out exceeds the size of the projectile, suggesting that the fireball created in the collision has expanded. For Au+Au reactions, the observed centrality dependence of the two-proton correlation function implies that more central collisions lead to a larger source sizes.Comment: RevTex, 12 pages, 5 figure

Nasofacial angle and nasal prominence : a quantitative investigation of idealized and normative values

PURPOSE: A quantitative evaluation of the influence of the nasofacial angle on perceived attractiveness and threshold values of desire for rhinoplasty. MATERIAL AND METHODS: The nasofacial angle of an idealized silhouette male Caucasian/white profile image was altered incrementally between 21° and 48°. Images were rated on a Likert scale by pretreatment patients (n = 75), laypersons (n = 75), and clinicians (n = 35). RESULTS: A nasofacial angle of approximately 30° was deemed to be ideal, with a range of 27°-36° deemed acceptable. Angles above or below this range were perceived as unattractive. Angles outside the range of 21°-42° were deemed very unattractive. Excessive nasal prominence (nasofrontal angle of 48°) was deemed the least attractive. In terms of threshold values of desire for surgery, for all groups a threshold value of ≥39° and ≤24° indicated a preference for surgery, with clinicians least likely to suggest surgery. The patient group assessments demonstrated the greatest variability, stressing the importance of using patients as observers, as well as laypersons and clinicians, in facial attractiveness research. CONCLUSIONS: It is recommended that in rhinoplasty planning, the range of normal variability of the nasofrontal angle, in terms of observer acceptance, is taken into account, as well as threshold values of desire for surgery

Mechanical properties of β-HMX

Background: For a full understanding of the mechanical properties of a material, it is essential to understand the defect structures and associated properties and microhardness indentation is a technique that can aid this understanding. Results: The Vickers hardness on (010), {011} and {110} faces lay in the range of 304-363 MPa. The Knoop Hardnesses on the same faces lay in the range 314-482 MPa. From etching of three indented surfaces, the preferred slip planes have been identified as (001) and (101). For a dislocation glide, the most likely configuration for dislocation movement on the (001) planes is (001) [100] (|b| = 0.65 nm) and for the (101) plane as (101) 101~(|b| = 1.084 nm) although (101) [010] (|b| = 1.105 nm) is possible. Tensile testing showed that at a stress value of 2.3 MPa primary twinning occurred and grew with increasing stress. When the stress was relaxed, the twins decreased in size, but did not disappear. The twinning shear strain was calculated to be 0.353 for the (101) twin plane. Conclusions: HMX is considered to be brittle, compared to other secondary explosives. Comparing HMX with a range of organic solids, the values for hardness numbers are similar to those of other brittle systems. Under the conditions developed beneath a pyramidal indenter, dislocation slip plays a major part in accommodating the local deformation stresses. © 2015 Gallagher et al.; licensee Springer

Structural basis of the filamin A actin-binding domain interaction with F-actin

Cryo-EM reconstructions were deposited in the Electron Microscopy Data Bank with the following accession numbers: F20-F-actin-FLNaABD, EMD-7833; F20-F-actin-FLNaABD-Q170P, EMD-7832; F20-F-actin-FLNaABD-E254K, EMD-8918; Krios-F-actin-FLNaABD-E254K, EMD-7831. The corresponding FLNaABD-E254K filament model was deposited in the PDB with accession number 6D8C. Source data for F-actin-targeting analyses (Figs. 2c,d,g,h, 3b,c,e,f, 4d,e, 5c,d, and 6a,b) and co-sedimentation assays (Figs. 5g and 6d) are available with the paper online. Other data are available from the corresponding author upon reasonable request. We thank Z. Razinia for generating numerous FLNa constructs, S. Wu for expertise in using the Krios microscope, J. Lees for advice on model refinement, and M. Lemmon for helpful comments in preparing the manuscript. We also thank the Yale Center for Research Computing for guidance and use of the Farnam Cluster, as well as the staff at the YMS Center for Molecular Imaging for the use of the EM Core Facility. This work was funded by grants from the National Institutes of Health (R01-GM068600 (D.A.C.), R01-NS093704 (D.A.C.), R37-GM057247 (C.V.S.), R01-GM110530 (C.V.S.), T32-GM007324, T32-GM008283) and an award from American Heart Association (15PRE25700119 (D.V.I.)).Peer reviewedPostprin

Dynamic Changes in the MicroRNA Expression Profile Reveal Multiple Regulatory Mechanisms in the Spinal Nerve Ligation Model of Neuropathic Pain

Neuropathic pain resulting from nerve lesions or dysfunction represents one of the most challenging neurological diseases to treat. A better understanding of the molecular mechanisms responsible for causing these maladaptive responses can help develop novel therapeutic strategies and biomarkers for neuropathic pain. We performed a miRNA expression profiling study of dorsal root ganglion (DRG) tissue from rats four weeks post spinal nerve ligation (SNL), a model of neuropathic pain. TaqMan low density arrays identified 63 miRNAs whose level of expression was significantly altered following SNL surgery. Of these, 59 were downregulated and the ipsilateral L4 DRG, not the injured L5 DRG, showed the most significant downregulation suggesting that miRNA changes in the uninjured afferents may underlie the development and maintenance of neuropathic pain. TargetScan was used to predict mRNA targets for these miRNAs and it was found that the transcripts with multiple predicted target sites belong to neurologically important pathways. By employing different bioinformatic approaches we identified neurite remodeling as a significantly regulated biological pathway, and some of these predictions were confirmed by siRNA knockdown for genes that regulate neurite growth in differentiated Neuro2A cells. In vitro validation for predicted target sites in the 3′-UTR of voltage-gated sodium channel Scn11a, alpha 2/delta1 subunit of voltage-dependent Ca-channel, and purinergic receptor P2rx ligand-gated ion channel 4 using luciferase reporter assays showed that identified miRNAs modulated gene expression significantly. Our results suggest the potential for miRNAs to play a direct role in neuropathic pain