Status And Computer Simulations For The Front End Of The Proton Injector For FAIR

FAIR - the international facility for antiproton and ionresearch – located at GSI in Darmstadt, Germany is oneof the largest research projects worldwide. It will providean antiproton production rate of 7·1010 cooled pbars perhour, which is equivalent to a primary proton beamcurrent of 2·1016 protons per hour. A high intensity protonlinac (p-linac) will be built, with an operating rffrequencyof 325 MHz to accelerate a 70 mA proton beamup to 70 MeV, using conducting crossed-bar H-cavities.The repetition rate is 4 Hz with an ion beam pulse lengthof 36 μs [1]. Developed within a joint French-Germancollaboration - GSI/CEA-SACLAY/IAP – the compactproton linac will be injected by a microwave ion sourceand a low energy beam transport (LEBT). The 2.45 GHzion source allows high brightness ion beams at an energyof 95 keV and will deliver a proton beam current of 100mA at the entrance of the RFQ (Radio FrequencyQuadrupole) within an emittance of 0.3π mm mrad (rms).To check on these parameters computer simulations withTraceWin, IGUN and IBSIMU of the ion extraction andLEBT (Low Energy Beam Transport) are performed

The probe beam linac in CTF3

JACoW web site http://accelconf.web.cern.ch/AccelConf/e06/The test facility CTF3, presently under construction at CERN within an international collaboration, is aimed at demonstrating the key feasibility issues of the multi-TeV linear collider CLIC. The objective of the probe beam linac is to "mimic" the main beam of CLIC in order to measure precisely the performances of the 30 GHz CLIC accelerating structures. In order to meet the required parameters of this 200 MeV probe beam, in terms of emittance, energy spread and bunch-length, the most advanced techniques have been considered: laser triggered photo-injector, velocity bunching, beam-loading compensation, RF pulse compression ... The final layout is described, and the selection criteria and the beam dynamics results are reviewed

Horizon 2020 EuPRAXIA design study

The Horizon 2020 Project EuPRAXIA ("European Plasma Research Accelerator with eXcellence In Applications") is preparing a conceptual design report of a highly compact and cost-effective European facility with multi-GeV electron beams using plasma as the acceleration medium. The accelerator facility will be based on a laser and/or a beam driven plasma acceleration approach and will be used for photon science, high-energy physics (HEP) detector tests, and other applications such as compact X-ray sources for medical imaging or material processing. EuPRAXIA started in November 2015 and will deliver the design report in October 2019. EuPRAXIA aims to be included on the ESFRI roadmap in 2020

EuPRAXIA - A compact, cost-efficient particle and radiation source

Plasma accelerators present one of the most suitable candidates for the development of more compact particle acceleration technologies, yet they still lag behind radiofrequency (RF)-based devices when it comes to beam quality, control, stability and power efficiency. The Horizon 2020-funded project EuPRAXIA ("European Plasma Research Accelerator with eXcellence In Applications") aims to overcome the first three of these hurdles by developing a conceptual design for a first international user facility based on plasma acceleration. In this paper we report on the main features, simulation studies and potential applications of this future research infrastructure

EuPRAXIA - A Compact, Cost-Efficient Particle and Radiation Source

Plasma accelerators present one of the most suitable candidates for the development of more compact particle acceleration technologies, yet they still lag behind radiofrequency (RF)-based devices when it comes to beam quality, control, stability and power efficiency. The Horizon 2020-funded project EuPRAXIA (“European Plasma Research Accelerator with eXcellence In Applications”) aims to overcome the first three of these hurdles by developing a conceptual design for a first international user facility based on plasma acceleration. In this paper we report on the main features, simulation studies and potential applications of this future research infrastructure

Characterization of flagella of Clostridium difficile and their role in serogrouping reactions.

Slide agglutination with rabbit antisera allows the differentiation of 10 serogroups of Clostridium difficile, namely, A, B, C, D, F, G, H, I, K, and X. Each serogroup displays a specific protein profile in sodium dodecyl sulfate-polyacrylamide gel electrophoresis, except for A, which displays 12 different protein profiles (A1 to A12). In the present work, electron microscopy revealed the presence of uniformly distributed flagella in the reference strains of serogroups G and K and in all strains representative of the 12 subgroups within serogroup purified by differential centrifugation. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of these preparations revealed one distinct band with an apparent molecular mass of approximately 39 kilodaltons. Antiserum was prepared by immunizing a rabbit with the serogroup A flagellin, which had been eluted from the gel. In immunoblotting, this antiserum cross-reacted with the flagellin of the other strains. When the cells were deflagellated by a short sonication, the cross-reactions observed by slide agglutination with A, G, and K antisera were suppressed. Similarly, shearing of flagella allowed specific slide agglutination of the 12 subgroups of serogroup A

Canine hemorrhagic enteritis: Detection of viral particles by electron microscopy

At necropsy, several dogs which died showing symptoms of hemorrhagic diarrhea, had significant lesions of the mucosa that were found especially in the duodenum and upper part of the small bowel. Study of ultrathin sections from the diseased mucosa revealed particles resembling parvoviruses in altered nuclei of cells of the intestinal crypts. Electron microscopic examination of intestinal contents by negative staining has shown the presence of many viral particles which have a diameter of 24 nm and whose profile is consistent with an icosahedral shape. These virions float at a density of 1.43 g/cm3 in cesium chloride and agglutinate rhesus monkey and swine red blood cells at 4° C. A possible etiological role in discussed. This virus is compared with the minute virus of canines and the Feline Panleukopenia virus. © 1979 Springer-Verlag

Commissioning of the ECR ion source of the high intensity proton injector of the Facility for Antiproton and Ion Research (FAIR)

International audienceThe CEA at Saclay is in charge of developing and building the ion source and the low energy line of the proton linac of the FAIR (Facility for Antiproton and Ion Research) accelerator complex located at GSI (Darmstadt) in Germany. The FAIR facility will deliver stable and rare isotope beams covering a huge range of intensities and beam energies for experiments in the fields of atomic physics, plasma physics, nuclear physics, hadron physics, nuclear matter physics, material physics, and biophysics. A significant part of the experimental program at FAIR is dedicated to antiproton physics that requires an ultimate number 7 × 1010 cooled pbar/h. The high-intensity proton beam that is necessary for antiproton production will be delivered by a dedicated 75 mA/70 MeV proton linac. A 2.45 GHz microwave ion source will deliver a 100 mA H+ beam pulsed at 4 Hz with an energy of 95 keV. A 2 solenoids low energy beam transport line allows the injection of the proton beam into the radio frequency quadrupole (RFQ) within an acceptance of 0.3π mm mrad (norm. rms). An electrostatic chopper system located between the second solenoid and the RFQ is used to cut the beam macro-pulse from the source to inject 36 μs long beam pulses into the RFQ. At present time, a Ladder-RFQ is under construction at the University of Frankfurt. This article reports the first beam measurements obtained since mid of 2016. Proton beams have been extracted from the ECR ion source and analyzed just after the extraction column on a dedicated diagnostic chamber. Emittance measurements as well as extracted current and species proportion analysis have been performed in different configurations of ion source parameters, such as magnetic field profile, radio frequency power, gas injection, and puller electrode voltage