JACoW web site http://accelconf.web.cern.ch/AccelConf/e06/The test facility CTF3, presently under construction at CERN within an international collaboration, is aimed at demonstrating the key feasibility issues of the multi-TeV linear collider CLIC. The objective of the probe beam linac is to "mimic" the main beam of CLIC in order to measure precisely the performances of the 30 GHz CLIC accelerating structures. In order to meet the required parameters of this 200 MeV probe beam, in terms of emittance, energy spread and bunch-length, the most advanced techniques have been considered: laser triggered photo-injector, velocity bunching, beam-loading compensation, RF pulse compression ... The final layout is described, and the selection criteria and the beam dynamics results are reviewed

Authier, M.

Bogard, D.

Curtoni, A.

Delferriere, O.

Dispau, G.

Duperrier, R.

Farabolini, W.

Girardot, P.

Jablonka, M.

Jannin, J.-L.

Luong, M.

Mosnier, A.

Peauger, F.

Rouvière, N.

Roux, R.

HAL-Rennes 1

The probe beam linac in CTF3

HAL-CEA

The probe beam linac in CTF3A. Mosnier, M. Authier, D. Bogard, A. Curtoni, O. Delferriere, G. Dispau, R.Duperrier, W. Farabolini, P. Girardot, M. Jablonka, et al.To cite this version:A. Mosnier, M. Authier, D. Bogard, A. Curtoni, O. Delferriere, et al.. The probe beam linacin CTF3. Tenth European Particle Accelerator Conference ”EPAC’06”, Jun 2006, Edinburgh,United Kingdom. pp.679-681, 2006. <in2p3-00118817>HAL Id: in2p3-00118817http://hal.in2p3.fr/in2p3-00118817Submitted on 6 Dec 2006HAL is a multi-disciplinary open accessarchive for the deposit and dissemination of sci-entific research documents, whether they are pub-lished or not. The documents may come fromteaching and research institutions in France orabroad, or from public or private research centers.L’archive ouverte pluridisciplinaire HAL, estdestine´e au de´poˆt et a` la diffusion de documentsscientifiques de niveau recherche, publie´s ou non,e´manant des e´tablissements d’enseignement et derecherche franc¸ais ou e´trangers, des laboratoirespublics ou prive´s.THE PROBE BEAM LINAC IN CTF3 Alban Mosnier, Martial Authier, Daniel Bogard, Aline Curtoni, Olivier Delferriere, Gilles Dispau, Romuald Duperrier, Wilfrid Farabolini, Patrick Girardot, Marcel Jablonka, Jean-Luc Jannin, Michel Luong, Franck Peauger, CEA/DSM/DAPNIA, 91191 Gif-sur-Yvette Cedex, France, Raphaël Roux, CNRS/IN2P3/LAL-Orsay, France, N. Rouvière, CNRS/IN2P3/IPN-Orsay, FranceAbstract The test facility CTF3, presently under construction at CERN within an international collaboration, is aimed at demonstrating the key feasibility issues of the multi-TeV linear collider CLIC. The objective of the probe beam linac is to "mimic" the main beam of CLIC in order to measure precisely the performances of the 30 GHz CLIC accelerating structures. In order to meet the required parameters of this 200 MeV probe beam, in terms of emittance, energy spread and bunch-length, the most advanced techniques have been considered: laser triggered photo-injector, velocity bunching, beam-loading compensation, RF pulse compression ... The final layout is described, and the selection criteria and the beam dynamics results are reviewed. INTRODUCTION The probe beam will be an essential component for the two-beam acceleration experiments which are planned in the two-beam test-stand in CTF3 [1]. The required performances of the probe beam, as well as the motivations, are listed in Table 1. The main technical choices were driven by the beam requirements and, at a least extent, some economical considerations : • beam generation : a laser triggered photo-injector is selected because it provides both better emittance and greater time flexibility than a thermo-ionic gun; • acceleration : two 4.5 m long TW sections of the dismantled Lep Injector Linac (LIL) are used for economical reasons, despite a significant level of beam loading; • bunch compression : the velocity bunching technique is chosen instead of a magnetic chicane because it is simpler, doesn’t spoil emittance, and only requires one additional - and existing -  LIL section.  The layout (Fig.1) then finally comprises: a photo-injector, designed by LAL-Orsay [2], including solenoids for a proper space charge compensation, one LIL section for bunch compression, two LIL sections for acceleration to ∼200 MeV, and a transport beamline equipped with diagnostics to measure emittance, bunchlength and energy spread, before delivery to the two-beam test stand. First beam is expected at beginning of 2008. Table 1: Main beam parameters and motivations. Energy 200 MeV Avoid beam disruption in high RF fields Emittance rms < 20 π mm.mrad Fit in 30 GHz structure acceptance Energy spread < ± 2% Measurement resolution Bunch charge 0.5 nC Bunch spacing 0.333 ns ∼ CLIC parameters Number of bunches 1 – 64 Measure 30 GHz structure transients bunchlength < 0.75 ps Acceleration with 30 GHz The Cs2Te photocathode will be elaborated in an adjecent to the gun existing preparation chamber. As the expected quantum efficiency will then be less than 1%, the bunch charge in a first step will likely be limited to ∼0.2-0.3 nC.   Figure 1: Schematic layout of the probe beam linac (Califes).Proceedings of EPAC 2006, Edinburgh, Scotland MOPLS05903 Linear Colliders, Lepton Accelerators and New Acceleration TechniquesA03 Linear Colliders679Later on, the photocathode can be elaborated in the Cern photo-emission laboratory, provided that a special transport carrier is available. Since both drive beam and probe beam have to be synchronous, a signal from the laser beam developed for the drive beam (DB) linac [3] will be derived and will then undergo the following operations: 1) appropriate windowing (in delay and duration) of the unused IR power pulses supplied by the DB laser 2) conversion of these laser pulses into UV by a fourfold frequency multiplier 3) increase of pulse frequency from 1.5 GHz to 3 GHz 4) transport of the UV light pulses to the photocathode, ∼80 m away. BEAM DYNAMICS single bunch The 1 mm rms long bunches delivered by the RF gun  have to be compressed by a factor of ∼ 4 before being injected into the 30 GHz CLIC structures. The “velocity bunching” method [4] consists in injecting the beam at the zero acceleration phase of the RF wave of the first LIL section. The bunch is then smoothly compressed while ‘sliding’ towards the crest of the wave. The minimal bunchlength is limited by the initial energy spread and space charge forces. Numerical simulations, from the photocathode to the linac end, were performed using a modified PARMELA version [5]. Conservative parameters for the laser pulse (gaussian distribution, σt = 4 ps, σr = 1 mm) and RF gun (Ez = 80 MV/m, Bz < 0.22 T) and bunch charge of 0.5 nC have been assumed. With a gradient of 15 MV/m in the compression section, the optimum compression ratio reached a maximum value, larger than 8, with ~20 MeV energy gain. The evolution of the bunch length along the linac, from the photocathode to the exit of the third LIL section, is shown in figure 2. We also checked that the sensitivity of the bunchlength to the RF phase of the compression section is rather loose. With an accelerating gradient of 17 MV/m in the two accelerating sections and a magnetic field in the solenoids (~0.05 T), the beam energy at the exit of the linac reaches ~180 MeV with less than 1% energy spread and the normalized transverse emittance is less than 8 π mm.mrad . multi bunch Since the beam current in the macro-pulse is high (0.5 nC at 3 GHz ⇒ 1.5 A) the transient beam-loading  in the probe beam linac is of main concern. That’s why we developed a specific code, based on the coupled resonator model, to study the transient effects in the travelling wave sections, with the following features: space harmonics and dispersive effects of the structure included, any waveform of the RF input pulse, calculation of beam interaction from the propagation of the induced waves including dispersive effects. The LIL section is a quasi-constant gradient structure, composed of 9 constant impedance families linked by 4 linearly tapered transition cells. The space harmonics were inferred from Superfish calculations.   Figure 2 : rms bunch length along the linac and sensitivity to the RF phase (box). The field pattern of the travelling wave in the n-th cell of length d is re-constructed at each  time: ( ) dzmimnmintinnn eaeAeEzE πφφω 20)( −Δ∑××= where nin eA φ accounts for the cell excitation (steady-state or transient); nφΔ is the phase shift of cell n and nma  is the m-th harmonic. Simulation results on the compression section at full beam-loading show too large energy and phase deviations (∼3 MeV ∼7°) between first and last bunch in the train (figure 3).  Figure 3 : Bunch energy and phase at the exit of compression section at full current. Because of the very short current pulse (∼20 ns for 64 bunches) with respect to the section filling time (1.3 μs) a conventional cure, like a beam injection before the end of the filling of the structure, is not suitable. Other methods, as a frequency detuning of the section or the use of a magnetic chicane, could efficiently compensate for the phase error, but of course not the energy  drop of ∼10%. In a first step, the bunch charge will then have to be linearly reduced with the number N of bunches, Qb < 5 nC / Nb, such that both energy and phase deviations meet the requirements (smaller than 1% and 1° at 3 GHz). MOPLS059 Proceedings of EPAC 2006, Edinburgh, Scotland680 03 Linear Colliders, Lepton Accelerators and New Acceleration TechniquesA03 Linear CollidersRF SYSTEMS The RF system consists of one single klystron – modulator system, a RF pulse compressor controlled by a specific LLRF system, a distribution network to feed the gun cavity and the three TW sections. The RF source is a 45 MW peak power klystron from Thales. The high voltage pulse has a usable flat top of 5.5 µs with ± 0.25 % voltage ripple and ± 0.1 % pulse to pulse stability. The repetition rate is 5 Hz.  The RF pulse compression system increases the power up to 90 MW while reducing the pulse width to about 1.3 µs. This system, designed for the drive beam linac [6], stores the energy in a high Q Barrel Open Cavity (BOC) working in a travelling wave mode. The 180° phase switch aimed at emptying the stored energy, as well as the phase modulation applied to shape the RF pulse, are supplied by the LLRF system. The RF network divides the high power into four arms by means of one 3 dB and two 4.5 dB splitters. The standing wave RF gun arm includes a circulator, a phase shifter and an attenuator. The phase between the two acceleration sections is set by adjustment of waveguide length, whereas a new high power phase shifter is developed for the fine tuning of the compression section phase. This phase shifter is a 3 GHz scaling of the one studied at SLAC at 11.4 GHz [7] and consists of a circular waveguide operating in the TE01 mode and two wrap-around mode converters [8]. As shown in figure 4, the circular waveguide has a region with an expanded diameter, providing a reduction of the guide wavelength. A change of the length of this widened guide results then in a phase variation. The phase shifter is designed for 25 MW RF power, with a sensitivity of 1°/mm, maximum 200 mm variation, a precision of 0.5° and a stability of 0.1°.  Figure 4: Electric field inside the power phase shifter for two lengths of the widened waveguide. DIAGNOSTICS Beam characteristics of CALIFES accelerator lead to challenging beam diagnostics.  Coaxial re-entrant cavities [9] have been chosen for the beam orbit measurement - single bunch or 3 GHz bunch trains - because of their mechanical simplicity and excellent resolution. A new design, with a large frequency separation between monopole and dipole modes, as well as a low loop exposure to the electric fields, has been developed (Fig. 5).  Figure 5 : BPM for the probe beam linac. Transverse profiles are measured via beam imaging on a screen with a 1/3” CCD camera. Due to lower beam energy (5 MeV) and rather large beam size (1 mm), the first system located immediately after the gun is based on a phosphor movable screen. The second system, located after the triplet, is based on a back OTR movable aluminium screen. To comply either with the resolution and the range, two optics magnifications (1.7 and 0.4) are necessary. An optical filters wheel allows to cover the whole intensity dynamic from a single to 64 bunches. This profiler is also used for bunchlength measurement after deflection when passing at zero crossing through a transverse deflecting section. During standard operations the bunch length is tuned thanks to a RF pick-up providing non destructive information on the bunch spectrum [10]. Beam central energy and energy spread are measured on the third beam profile system located after a 15° bending magnet. Due to small energy density a phosphor screen is better suited. Last, time resolved measurements on beam central energy can be obtained thanks to the BPM located at the magnet exit. REFERENCES [1] V. Ziemann et al, “The Two-beam Test-stand in CTF3”, these proceedings. [2] J. Brossard et al, “Construction of the Probe Beam Photo-injector of CTF3”, these proceedings. [3] R. Losito et al, “The PHIN Photoinjector for the CTF3 Drive Beam”, these proceedings. [4] L. Serafini, M. Ferrario, “Velocity Bunching in Photo-Injectors'”, AIP Conf. Proc. 581, 87 (2001). [5] PARMELA code, v5.03 of Orsay implementation by B. Mouton, LAL-SERA 97-85, April 1997. [6] I. Syratchev, “RF pulse compression system for CTF3”, MDK Workshop, CERN, April 2001. [7] S.G. Tantawi, “Status and plans for active high power RF switching”, CLIC meeting, Nov. 2005 [8] S.G. Tantawi et al, “Evaluation of the TE12 mode in circular waveguide for low-loss, high power rf transmission”, Phys. Rev. ST Acc. Beams 3, 2000. [9] R. Bossart et al, “High Resolution BPM for future Colliders”, Proc. of the LINAC98 Conf., Chicago. [10] H.H. Braun et al., “Non-Intercepting Bunch Length Monitor for Picosecond Electron Bunches”, CERN Geneva, CLIC Note 371. Proceedings of EPAC 2006, Edinburgh, Scotland MOPLS05903 Linear Colliders, Lepton Accelerators and New Acceleration TechniquesA03 Linear Colliders681

HAL-IN2P3

The probe beam linac in CTF3

Abstract

Similar works

Full text

Available Versions

HAL-Rennes 1

HAL-CEA

HAL-IN2P3