138 research outputs found
Influence of indomethacin on lens regeneration in the newt notophthalmus viridescens
Following lentectomy newts were injected with indomethacin in a variety of carrier solutions at doses ranging from 1.2–120 mg/kg body weight every other day for 15–17 days. The results show that injection of this drug according to the regimen used has no significant effect on regeneration of the lens. The data suggest, but do not prove, that prostaglandins may not play a major role in the early phases of lens regeneration in the newt.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/47503/1/427_2004_Article_BF00848434.pd
Measurement of CP observables in B± → D(⁎)K± and B± → D(⁎)π± decays
Measurements of CP observables in B ± →D (⁎) K ± and B ± →D (⁎) π ± decays are presented, where D (⁎) indicates a neutral D or D ⁎ meson that is an admixture of D (⁎)0 and D¯ (⁎)0 states. Decays of the D ⁎ meson to the Dπ 0 and Dγ final states are partially reconstructed without inclusion of the neutral pion or photon, resulting in distinctive shapes in the B candidate invariant mass distribution. Decays of the D meson are fully reconstructed in the K ± π ∓ , K + K − and π + π − final states. The analysis uses a sample of charged B mesons produced in pp collisions collected by the LHCb experiment, corresponding to an integrated luminosity of 2.0, 1.0 and 2.0 fb −1 taken at centre-of-mass energies of s=7, 8 and 13 TeV, respectively. The study of B ± →D ⁎ K ± and B ± →D ⁎ π ± decays using a partial reconstruction method is the first of its kind, while the measurement of B ± →DK ± and B ± →Dπ ± decays is an update of previous LHCb measurements. The B ± →DK ± results are the most precise to date
Construction status and prospects of the Hyper-Kamiokande project
The Hyper-Kamiokande project is a 258-kton Water Cherenkov together with a 1.3-MW high-intensity neutrino beam from the Japan Proton Accelerator Research Complex (J-PARC). The inner detector with 186-kton fiducial volume is viewed by 20-inch photomultiplier tubes (PMTs) and multi-PMT modules, and thereby provides state-of-the-art of Cherenkov ring reconstruction with thresholds in the range of few MeVs. The project is expected to lead to precision neutrino oscillation studies, especially neutrino CP violation, nucleon decay searches, and low energy neutrino astronomy. In 2020, the project was officially approved and construction of the far detector was started at Kamioka. In 2021, the excavation of the access tunnel and initial mass production of the newly developed 20-inch PMTs was also started. In this paper, we present a basic overview of the project and the latest updates on the construction status of the project, which is expected to commence operation in 2027
Prospects for neutrino astrophysics with Hyper-Kamiokande
Hyper-Kamiokande is a multi-purpose next generation neutrino experiment. The detector is a two-layered cylindrical shape ultra-pure water tank, with its height of 64 m and diameter of 71 m. The inner detector will be surrounded by tens of thousands of twenty-inch photosensors and multi-PMT modules to detect water Cherenkov radiation due to the charged particles and provide our fiducial volume of 188 kt. This detection technique is established by Kamiokande and Super-Kamiokande. As the successor of these experiments, Hyper-K will be located deep underground, 600 m below Mt. Tochibora at Kamioka in Japan to reduce cosmic-ray backgrounds. Besides our physics program with accelerator neutrino, atmospheric neutrino and proton decay, neutrino astrophysics is an important research topic for Hyper-K. With its fruitful physics research programs, Hyper-K will play a critical role in the next neutrino physics frontier. It will also provide important information via astrophysical neutrino measurements, i.e., solar neutrino, supernova burst neutrinos and supernova relic neutrino. Here, we will discuss the physics potential of Hyper-K neutrino astrophysics
Measurement of asymmetries in and decays
See paper for full list of authors - All figures and tables, along with any supplementary material and additional information, are available at https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2016-041.html - Submitted to Phys. Lett. BInternational audienceA search for CP violation in D±→η′π± and D±s→η′π± decays is performed using proton-proton collision data, corresponding to an integrated luminosity of 3 fb−1, recorded by the LHCb experiment at centre-of-mass energies of 7 and 8 TeV. The measured CP-violating charge asymmetries are ACP(D±→η′π±)=(−0.61±0.72±0.55±0.12)% and ACP(D±s→η′π±)=(−0.82±0.36±0.24±0.27)%, where the first uncertainties are statistical, the second systematic, and the third are the uncertainties on the ACP(D±→K0Sπ±) and ACP(D±s→ϕπ±) measurements used for calibration. The results represent the most precise measurements of these asymmetries to date
Measurement of , , and production asymmetries in 7 and 8 TeV proton-proton collisions
See paper for full list of authors - All figures and tables, along with any supplementary material and additional information, are available at https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2016-062.html - Submitted to Phys. Lett. B.International audienceThe B0, B0s, B+ and Λ0b hadron production asymmetries are measured using a data sample corresponding to an integrated luminosity of 3.0 fb−1, collected by the LHCb experiment in proton-proton collisions at centre-of-mass energies of 7 and 8 TeV. The measurements are performed as a function of transverse momentum and rapidity of the b hadrons within the LHCb detector acceptance. The overall production asymmetries, integrated over transverse momentum and rapidity, are also determined
Search for violation in the phase space of decays
A search for time-integrated violation in the Cabibbo-suppressed decay
\mbox{D^0\rightarrow\pi^+\pi^-\pi^+\pi^-} is performed using an unbinned,
model-independent technique known as the energy test. This is the first
application of the energy test in four-body decays. The search is performed for
-even asymmetries and, for the first time, is extended to probe the
-odd case. Using proton-proton collision data corresponding to an integrated
luminosity of 3.0 fb collected by the LHCb detector at centre-of-mass
energies of 7 TeV and 8 TeV, the world's best sensitivity to
violation in this decay is obtained. The data are found to be consistent with
the hypothesis of symmetry with a -value of in the
-even case, and marginally consistent with a -value of in
the -odd case, corresponding to a significance for non-conservation of
2.7 standard deviations.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2016-044.htm
First observation of forward production in collisions at TeV
The decay Z→bb¯ is reconstructed in pp collision data, corresponding to 2 fb −1 of integrated luminosity, collected by the LHCb experiment at a centre-of-mass energy of s=8 TeV. The product of the Z production cross-section and the Z→bb¯ branching fraction is measured for candidates in the fiducial region defined by two particle-level b -quark jets with pseudorapidities in the range 2.220 GeV and dijet invariant mass in the range 452045 < m_{jj} < 1655462 \pm 763Z \rightarrow b \bar{b}332 \pm 46 \pm 59Z \rightarrow b \bar{b}pp$ collisions
Study of the lineshape of the chi(c1) (3872) state
A study of the lineshape of the chi(c1) (3872) state is made using a data sample corresponding to an integrated luminosity of 3 fb(-1) collected in pp collisions at center-of-mass energies of 7 and 8 TeV with the LHCb detector. Candidate chi(c1)(3872) and psi(2S) mesons from b-hadron decays are selected in the J/psi pi(+)pi(-) decay mode. Describing the lineshape with a Breit-Wigner function, the mass splitting between the chi(c1 )(3872) and psi(2S) states, Delta m, and the width of the chi(c1 )(3872) state, Gamma(Bw), are determined to be (Delta m=185.598 +/- 0.067 +/- 0.068 Mev,)(Gamma BW=1.39 +/- 0.24 +/- 0.10 Mev,) where the first uncertainty is statistical and the second systematic. Using a Flatte-inspired model, the mode and full width at half maximum of the lineshape are determined to be (mode=3871.69+0.00+0.05 MeV.)(FWHM=0.22-0.04+0.13+0.07+0.11-0.06-0.13 MeV, ) An investigation of the analytic structure of the Flatte amplitude reveals a pole structure, which is compatible with a quasibound D-0(D) over bar*(0) state but a quasivirtual state is still allowed at the level of 2 standard deviations
- …