Height and Pressure Test for Improving Spray Application

Pesticide application in agricultural fields affects a little over a million acres each year (USDA 2012). Current spray application equipment can automatically adjust nozzle flow rates in reaction to speed changes to maintain consistent application rates across the field. Uniform distribution of pesticides from the spray boom is critical to ensure proper crop care while minimizing negative environmental effects. Boom pressure and height are two primary factors that affect proper spray uniformity; however information on the combined effects of these factors are limited. The goal of this study was to provide end users with quantified data regarding the effects of combined nozzle pressure and height variability on spray uniformity for three common spray nozzles. Specific objectives of this project were to 1) determine a suitable operating envelope (i.e., nozzle pressure and height) to meet current performance standards for the nozzles tests, 2) determine errors between theoretical spray distributions (from nozzle manufacturer flow and spacing data) to laboratory patternator data collected at different nozzle pressures, and 3) compare nozzle distribution errors (theoretical versus patternator data) with coefficient of variation (CV), a current spray uniformity performance metric. A laboratory patternator was used to collect nozzle distribution in 25 mm increments across the spray pattern while varying height and pressure for the spray nozzles tested. The operating envelope for different combinations of pressure and height was considered acceptable if the CV values were less than 10%. CV values were compared to root mean squared error (RMSE) for the AIXR 11003 nozzles operated at a height of 51 cm and four operating pressures to evaluate potential differences when accuracy is considered (i.e., RMSE). In some configurations the data exceeded 10% CV resulting in a more constricted operating envelope for each individual nozzle type. The CV values show more variance versus RMSE values. For the AIXR11003, as pressure increased the RMSE decreased in value, meaning the experimental pattern became closer to the ideal pattern as pressure increased. The CV values decreased as pressure increased until a threshold is reached; CV values focus on precision but not accuracy, showing the spray pattern was consistent but not necessarily accurate, indicating the CV disregards the theoretical values and does not indicate error in the values. Thus accuracy of spray pattern distribution may not be considered in the manufacturer’s nozzle report

Single wavelength colour tuning of spiropyran and dithienylethene based photochromic coatings

Controlling the transmission of thin films with external stimuli is an important goal in functional optical materials and devices. Tuning is especially challenging where both broad band (neutral density filtering) and spectrally varied (colour) transmission are required. The external control provided by photochemically driven switching, between transmission levels and colours, is functionally simple from a device perspective. The limits due to the spectral ranges of individual photochromic compounds can be overcome by combining several photochromes within one material or device. Here we show that a combination of photochromic molecular switches immobilised in a PMMA polymer matrix enables tuning of colour and transparency. We show that only a single excitation wavelength is required through the use of the primary inner filter effect and the layered construction of the films in which the photochromes nitrospiropyran (NSP), and nitrothiospiropyran (TSP) or 1,2-bis-terthienyl-hexafluorocyclopentene (DTE) are separated spatially. The approach taken circumvents the need to match photochemical quantum yields and thermal reactivity of the component photochromes. The photochemical switching of the films was characterised by UV/vis absorption spectroscopy and shows that switching rates and photostationary states are limited by inner filter effects rather than the intrinsic properties of photochromes, such as photochemical quantum yields and thermal stability. The photochemical behaviour and stability of the photochromes in solution and in the PMMA films were compared and the concentration range over which self-inhibition of photochemical switching occurs was established. The rate of photochemical switching and the difference in transmission between the spiropyran and merocyanine forms in solution enable prediction of the performance in the films and enable rational design of colour tuning ranges and responsivity in thin film filters

Flow distribution in the accelerator-production-of-tritium target

Achieving nearly uniform flow distributions in the accelerator production of tritium (APT) target structures is an important design objective. Manifold effects tend to cause a nonuniform distribution in flow systems of this type, although nearly even distribution can be achieved. A program of hydraulic experiments is underway to provide a database for validation of calculational methodologies that may be used for analyzing this problem and to evaluate the approach with the most promise for achieving a nearly even flow distribution. Data from the initial three tests are compared to predictions made using four calculational methods. The data show that optimizing the ratio of the supply-to-return-manifold areas can produce an almost even flow distribution in the APT ladder assemblies. The calculations compare well with the data for ratios of the supply-to-return-manifold areas spanning the optimum value. Thus, the results to date show that a nearly uniform flow distribution can be achieved by carefully sizing the supply and return manifolds and that the calculational methods available are adequate for predicting the distributions through a range of conditions

Global ecological predictors of the soil priming effect.

Identifying the global drivers of soil priming is essential to understanding C cycling in terrestrial ecosystems. We conducted a survey of soils across 86 globally-distributed locations, spanning a wide range of climates, biotic communities, and soil conditions, and evaluated the apparent soil priming effect using 13C-glucose labeling. Here we show that the magnitude of the positive apparent priming effect (increase in CO2 release through accelerated microbial biomass turnover) was negatively associated with SOC content and microbial respiration rates. Our statistical modeling suggests that apparent priming effects tend to be negative in more mesic sites associated with higher SOC contents. In contrast, a single-input of labile C causes positive apparent priming effects in more arid locations with low SOC contents. Our results provide solid evidence that SOC content plays a critical role in regulating apparent priming effects, with important implications for the improvement of C cycling models under global change scenarios

A Measurement of the Tau Hadronic Branching Ratios

The exclusive and semi-exclusive branching ratios of the tau lepton hadronic decay modes (h- v_t, h- pi0 v_t, h- pi0 pi0 v_t, h- \geq 2pi0 v_t, h- \geq 3pi0 v_t, 2h- h+ v_t, 2h- h+ pi0 v_t, 2h- h+ \geq 2pi0 v_t, 3h- 2h+ v_t and 3h- 2h+ \geq 1pi0 v_t) were measured with data from the DELPHI detector at LEP.Comment: 53 pages, 18 figures, Accepted by Eur. Phys. J.

Ideas and perspectives: strengthening the biogeosciences in environmental research networks

Many scientific approaches are improving our understanding and management of the rapidly changing environment. Long-term environmental research networks are one approach to advancing local, regional, and global environmental science and education. A remarkable number and wide variety of environmental research networks operate around the world today. These are diverse in funding, infrastructure, motivating questions, scientific strengths, and the sciences that birthed and maintained the networks. Some networks have individual sites that were selected because they had produced invaluable long-term data, while other networks have new sites selected to span ecological gradients. However, all long-term environmental networks share two challenges. Networks must keep pace with scientific advances and interact with both the scientific community and society at large. If networks fall short of successfully addressing these challenges, they risk becoming irrelevant. The objective of this paper is to assert that the biogeosciences offer environmental research networks a number of opportunities to expand scientific impact and public engagement. We explore some of these opportunities with four networks: the International Long Term Ecological Research programs (ILTERs), the Critical Zone Observatories (CZOs), the Earth and Ecological Observatory networks (EONs), and the FLUXNET program of eddy flux sites. While these networks were founded and grown by interdisciplinary scientists, the preponderance of expertise and funding have gravitated activities of ILTERs and EONs toward ecology and biology, CZOs toward the Earth sciences and geology, and FLUXNET toward ecophysiology and micrometeorology. Our point is not to homogenize networks, nor to diminish disciplinary science. Rather, we argue that by more fully incorporating the integration of biology and geology in long-term environmental research networks, scientists can better leverage network assets, keep pace with the ever-changing science of the environment, and engage with larger scientific and public audiences

Global ecological predictors of the soil priming effect

Identifying the global drivers of soil priming is essential to understanding C cycling in terrestrial ecosystems. We conducted a survey of soils across 86 globally-distributed locations, spanning a wide range of climates, biotic communities, and soil conditions, and evaluated the apparent soil priming effect using 13C-glucose labeling. Here we show that the magnitude of the positive apparent priming effect (increase in CO2 release through accelerated microbial biomass turnover) was negatively associated with SOC content and microbial respiration rates. Our statistical modeling suggests that apparent priming effects tend to be negative in more mesic sites associated with higher SOC contents. In contrast, a single-input of labile C causes positive apparent priming effects in more arid locations with low SOC contents. Our results provide solid evidence that SOC content plays a critical role in regulating apparent priming effects, with important implications for the improvement of C cycling models under global change scenarios

Differential Affinity and Catalytic Activity of CheZ in E. coli Chemotaxis

Push–pull networks, in which two antagonistic enzymes control the activity of a messenger protein, are ubiquitous in signal transduction pathways. A classical example is the chemotaxis system of the bacterium Escherichia coli, in which the kinase CheA and the phosphatase CheZ regulate the phosphorylation level of the messenger protein CheY. Recent experiments suggest that both the kinase and the phosphatase are localized at the receptor cluster, and Vaknin and Berg recently demonstrated that the spatial distribution of the phosphatase can markedly affect the dose–response curves. We argue, using mathematical modeling, that the canonical model of the chemotaxis network cannot explain the experimental observations of Vaknin and Berg. We present a new model, in which a small fraction of the phosphatase is localized at the receptor cluster, while the remainder freely diffuses in the cytoplasm; moreover, the phosphatase at the cluster has a higher binding affinity for the messenger protein and a higher catalytic activity than the phosphatase in the cytoplasm. This model is consistent with a large body of experimental data and can explain many of the experimental observations of Vaknin and Berg. More generally, the combination of differential affinity and catalytic activity provides a generic mechanism for amplifying signals that could be exploited in other two-component signaling systems. If this model is correct, then a number of recent modeling studies, which aim to explain the chemotactic gain in terms of the activity of the receptor cluster, should be reconsidered

Submarine record of volcanic island construction and collapse in the Lesser Antilles arc: First scientific drilling of submarine volcanic island landslides by IODP Expedition 340

IODP Expedition 340 successfully drilled a series of sites offshore Montserrat, Martinique and Dominica in the Lesser Antilles from March to April 2012. These are among the few drill sites gathered around volcanic islands, and the first scientific drilling of large and likely tsunamigenic volcanic island-arc landslide deposits. These cores provide evidence and tests of previous hypotheses for the composition and origin of those deposits. Sites U1394, U1399, and U1400 that penetrated landslide deposits recovered exclusively seafloor-sediment, comprising mainly turbidites and hemipelagic deposits, and lacked debris avalanche deposits. This supports the concepts that i/ volcanic debris avalanches tend to stop at the slope break, and ii/ widespread and voluminous failures of pre-existing low-gradient seafloor sediment can be triggered by initial emplacement of material from the volcano. Offshore Martinique (U1399 and 1400), the landslide deposits comprised blocks of parallel strata that were tilted or micro-faulted, sometimes separated by intervals of homogenized sediment (intense shearing), while Site U1394 offshore Montserrat penetrated a flat-lying block of intact strata. The most likely mechanism for generating these large-scale seafloor-sediment failures appears to be propagation of a decollement from proximal areas loaded and incised by a volcanic debris avalanche. These results have implications for the magnitude of tsunami generation. Under some conditions, volcanic island landslide deposits comprised of mainly seafloor sediment will tend to form smaller magnitude tsunamis than equivalent volumes of subaerial block-rich mass flows rapidly entering water. Expedition 340 also successfully drilled sites to access the undisturbed record of eruption fallout layers intercalated with marine sediment which provide an outstanding high-resolution dataset to analyze eruption and landslides cycles, improve understanding of magmatic evolution as well as offshore sedimentation processes. This article is protected by copyright. All rights reserved