Feasibility study of the transonic biplane concept for transport aircraft application

Investigations were conducted to evaluate the feasibility of a transonic biplane consisting of a forward-mounted swept-back lower wing, a rear-mounted swept-forward upper wing, and a vertical fin connecting the wings at their tips. This wing arrangement results in significant reductions in induced drag relative to a monoplane designed with the same span, and it allows for a constant-section fuselage shape while closely matching an ideal area distribution curve for M = 0.95 cruise. However, no significant reductions in ramp weight were achieved for the biplane relative to a monoplane with the same mission capability. Flutter analyses of the biplane revealed both symmetric and antisymmetric instabilities that occur well below the required flutter speed. Further studies will be required to determine if acceptable flutter speeds can be achieved through the elimination of the instabilities by passive means or by active controls. Configurations designed for other missions, especially those with lower Mach numbers and lower dynamic pressures, should be examined since the geometries suitable for those design constraints might avoid the weight penalties and flutter instabilities which prevent exploitation of induced drag benefits for the configuration studied

Resolving the Submillimeter Background: the 850-micron Galaxy Counts

Recent deep blank field submillimeter surveys have revealed a population of luminous high redshift galaxies that emit most of their energy in the submillimeter. The results suggest that much of the star formation at high redshift may be hidden to optical observations. In this paper we present wide-area 850-micron SCUBA data on the Hawaii Survey Fields SSA13, SSA17, and SSA22. Combining these new data with our previous deep field data, we establish the 850-micron galaxy counts from 2 mJy to 10 mJy with a >3-sigma detection limit. The area coverage is 104 square arcmin to 8 mJy and 7.7 square arcmin to 2.3 mJy. The differential 850-micron counts are well described by the function n(S)=N_0/(a+S^3.2), where S is the flux in mJy, N_0=3.0 x 10^4 per square degree per mJy, and a=0.4-1.0 is chosen to match the 850-micron extragalactic background light. Between 20 to 30 per cent of the 850-micron background resides in sources brighter than 2 mJy. Using an empirical fit to our >2 mJy data constrained by the EBL at lower fluxes, we argue that the bulk of the 850-micron extragalactic background light resides in sources with fluxes near 1 mJy. The submillimeter sources are plausible progenitors of the present-day spheroidal population.Comment: 5 pages, accepted by The Astrophysical Journal Letter

The JCMT Gould Belt survey: Dense core clusters in Orion B

The James Clerk Maxwell Telescope Gould Belt Legacy Survey obtained SCUBA-2 observations of dense cores within three sub-regions of OrionB: LDN1622, NGC2023/2024, and NGC2068/2071, all of which contain clusters of cores. We present an analysis of the clustering properties of these cores, including the two-point correlation function and Cartwright’s Q parameter. We identify individual clusters of dense cores across all three regions using a minimal spanning tree technique, and find that in each cluster, the most massive cores tend to be centrally located. We also apply the independent M–Σ technique and find a strong correlation between core mass and the local surface density of cores. These two lines of evidence jointly suggest that some amount of mass segregation in clusters has happened already at the dense core stage

The sub-millimetre evolution of V4334 Sgr (Sakurai's Object)

We report the results of monitoring of V4334 Sgr (Sakurai's Object) at 450 microns and 850 microns with SCUBA on the James Clerk Maxwell Telescope. The flux density at both wavelengths has increased dramatically since 2001, and is consistent with continued cooling of the dust shell in which Sakurai's Object is still enshrouded, and which still dominates the near-infrared emission. Assuming that the dust shell is optically thin at sub-millimetre wavelengths and optically thick in the near-infrared, the sub-millimetre data imply a mass-loss rate during 2003 of ~3.4(+/0.2)E-5 for a gas-to-dust ratio of 75. This is consistent with the evidence from 1-5micron observations that the mass-loss is steadily increasing.Comment: 5 pages, 4 eps figures, accepted for publication in MNRA

The very bright SCUBA galaxy count: looking for SCUBA galaxies with the Mexican Hat Wavelet

We present the results of a search for bright high-redshift galaxies in two large SCUBA scan-maps of Galactic regions. A Mexican Hat Wavelet technique was used to locate point sources in these maps, which suffer high foreground contamination as well as typical scan-map noise signatures. A catalogue of point source objects was selected and observed again in the submillimetre continuum, and in HCO+ (3->2) at zero redshift to rule out Galactic sources. No extragalactic sources were found. Simulations show that the survey was sensitive to sources with fluxes > 50 mJy, depending on the local background. These simulations result in upper limits on the 850-micron counts of SCUBA galaxies of 53 per square degree at 50 mJy and 2.9 per square degree at 100 mJy.Comment: Accepted by MNRA

CHIMPS: the ¹³CO/C¹⁸O (<i>J</i> = 3 → 2) Heterodyne Inner Milky Way Plane Survey

We present the 13CO/C18O (J = 3 → 2) Heterodyne Inner Milky Way Plane Survey (CHIMPS) which has been carried out using the Heterodyne Array Receiver Program on the 15 m James Clerk Maxwell Telescope (JCMT) in Hawaii. The high-resolution spectral survey currently covers |b| ≤ 0.5° and 28° ≲ l ≲ 46°, with an angular resolution of 15 arcsec in 0.5 km s-1 velocity channels. The spectra have a median rms of ˜0.6 K at this resolution, and for optically thin gas at an excitation temperature of 10 K, this sensitivity corresponds to column densities of NH2 ˜ 3 × 1020 cm-2 and NH2 ˜ 4 × 1021 cm-2 for 13CO and C18O, respectively. The molecular gas that CHIMPS traces is at higher column densities and is also more optically thin than in other publicly available CO surveys due to its rarer isotopologues, and thus more representative of the three-dimensional structure of the clouds. The critical density of the J = 3 → 2 transition of CO is ≳104 cm-3 at temperatures of ≤20 K, and so the higher density gas associated with star formation is well traced. These data complement other existing Galactic plane surveys, especially the JCMT Galactic Plane Survey which has similar spatial resolution and column density sensitivity, and the Herschel infrared Galactic Plane Survey. In this paper, we discuss the observations, data reduction and characteristics of the survey, presenting integrated-emission maps for the region covered. Position-velocity diagrams allow comparison with Galactic structure models of the Milky Way, and while we find good agreement with a particular four-arm model, there are some significant deviations

A Submillimeter Study of the Star-Forming Region NGC7129

New molecular (13CO J=3-2) and dust continuum (450 and 850 micron) SCUBA maps of the NGC7129 star forming region are presented, complemented by C18O J=3-2 spectra at several positions within the mapped region. The maps include the Herbig Ae/Be star LkHalpha 234, the far-infrared source NGC 7129 FIRS2 and several other pre-stellar sources embedded within the molecular ridge. The SCUBA maps help us understand the nature of the pre-main sequence stars in this actively star forming region. A deeply embedded submillimeter source, SMM2, not clearly seen in any earlier data set, is shown to be a pre-stellar core or possibly a protostar. The highest continuum peak emission is identified with the deeply embedded source IRS6, a few arcseconds away from LkHalpha 234, and also responsible for both the optical jet and the molecular outflow. The gas and dust masses are found to be consistent, suggesting little or no CO depletion onto grains. The dust emissivity index is lower towards the dense compact sources, beta ~1 - 1.6, and higher, beta ~ 2.0, in the surrounding cloud, implying small size grains in the PDR ridge, whose mantles have been evaporated by the intense UV radiation.Comment: Accepted by Ap

Increased accuracy of ligand sensing by receptor internalization

Many types of cells can sense external ligand concentrations with cell-surface receptors at extremely high accuracy. Interestingly, ligand-bound receptors are often internalized, a process also known as receptor-mediated endocytosis. While internalization is involved in a vast number of important functions for the life of a cell, it was recently also suggested to increase the accuracy of sensing ligand as the overcounting of the same ligand molecules is reduced. Here we show, by extending simple ligand-receptor models to out-of-equilibrium thermodynamics, that internalization increases the accuracy with which cells can measure ligand concentrations in the external environment. Comparison with experimental rates of real receptors demonstrates that our model has indeed biological significance.Comment: 9 pages, 4 figures, accepted for publication in Physical Review

A SCUBA survey of Orion, the low-mass end of the core mass function

We have re-analysed all of the SCUBA archive data of the Orion star-forming regions. We have put together all of the data taken at different times by different groups. Consequently we have constructed the deepest submillimetre maps of these regions ever made. There are four regions that have been mapped: Orion A North & South, and Orion B North & South. We find that two of the regions, Orion A North and Orion B North, have deeper sensitivity and completeness limits, and contain a larger number of sources, so we concentrate on these two. We compare the data with archive data from the Spitzer Space Telescope to determine whether or not a core detected in the submillimetre is pre-stellar in nature. We extract all of the pre-stellar cores from the data and make a histogram of the core masses. This can be compared to the stellar initial mass function (IMF). We find the high-mass core mass function follows a roughly Salpeter-like slope, just like the IMF, as seen in previous work. Our deeper maps allow us to see that the core mass function (CMF) turns over at ~ 1.3 Mo, about a factor of 4 higher than our completeness limit. This turnover has never previously been observed, and is only visible here due to our much deeper maps. It mimics the turnover seen in the stellar IMF at ~ 0.1 Mo. The low-mass side of the CMF is a power-law with an exponent of 0.35 +/- 0.2, which is consistent with the low-mass slope of the young cluster IMF of 0.3 +/- 0.1. This shows that the CMF continues to mimic the shape of the IMF all the way down to the lower completeness limit of these data at ~ 0.3 Mo.Comment: 9 pages, inc. 6 figures (+ Appendix; 1 Table = 6 pages

The JCMT Gould Belt Survey: a quantitative comparison between SCUBA-2 data reduction methods

Performing ground-based submillimetre observations is a difficult task as the measurements are subject to absorption and emission from water vapour in the Earth's atmosphere and time variation in weather and instrument stability. Removing these features and other artefacts from the data is a vital process which affects the characteristics of the recovered astronomical structure we seek to study. In this paper, we explore two data reduction methods for data taken with the Submillimetre Common-User Bolometer Array-2 (SCUBA-2) at the James Clerk Maxwell Telescope (JCMT). The JCMT Legacy Reduction 1 (JCMT LR1) and The Gould Belt Legacy Survey Legacy Release 1 (GBS LR1) reduction both use the same software (starlink) but differ in their choice of data reduction parameters. We find that the JCMT LR1 reduction is suitable for determining whether or not compact emission is present in a given region and the GBS LR1 reduction is tuned in a robust way to uncover more extended emission, which better serves more in-depth physical analyses of star-forming regions. Using the GBS LR1 method, we find that compact sources are recovered well, even at a peak brightness of only three times the noise, whereas the reconstruction of larger objects requires much care when drawing boundaries around the expected astronomical signal in the data reduction process. Incorrect boundaries can lead to false structure identification or it can cause structure to be missed. In the JCMT LR1 reduction, the extent of the true structure of objects larger than a point source is never fully recovered