18 research outputs found

    Effect of Monomer Solubility on the Evolution of Copolymer Morphology during Polymerization-Induced Self-Assembly in Aqueous Solution

    Get PDF
    Polymerization-induced self-assembly (PISA) has become a widely used technique for the rational design of diblock copolymer nano-objects in concentrated aqueous solution. Depending on the specific PISA formulation, reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion polymerization typically provides straightforward access to either spheres, worms, or vesicles. In contrast, RAFT aqueous emulsion polymerization formulations often lead to just kinetically-trapped spheres. This limitation is currently not understood, and only a few empirical exceptions have been reported in the literature. In the present work, the effect of monomer solubility on copolymer morphology is explored for an aqueous PISA formulation. Using 2-hydroxybutyl methacrylate (aqueous solubility = 20 g dm–3 at 70 °C) instead of benzyl methacrylate (0.40 g dm–3 at 70 °C) for the core-forming block allows access to an unusual “monkey nut” copolymer morphology over a relatively narrow range of target degrees of polymerization when using a poly(methacrylic acid) RAFT agent at pH 5. These new anisotropic nanoparticles have been characterized by transmission electron microscopy, dynamic light scattering, aqueous electrophoresis, shear-induced polarized light imaging (SIPLI), and small-angle X-ray scattering

    In Situ Small-Angle X-ray Scattering Studies During Reversible Addition–Fragmentation Chain Transfer Aqueous Emulsion Polymerization

    Get PDF
    Polymerization-induced self-assembly (PISA) is a powerful platform technology for the rational and efficient synthesis of a wide range of block copolymer nano-objects (e.g., spheres, worms or vesicles) in various media. In situ small-angle X-ray scattering (SAXS) studies of reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization have previously provided detailed structural information during self-assembly (see M. J. Derry et al., Chem. Sci. 2016, 7, 5078–5090). However, conducting the analogous in situ SAXS studies during RAFT aqueous emulsion polymerizations poses a formidable technical challenge because the inherently heterogeneous nature of such PISA formulations requires efficient stirring to generate sufficiently small monomer droplets. In the present study, the RAFT aqueous emulsion polymerization of 2-methoxyethyl methacrylate (MOEMA) has been explored for the first time. Chain extension of a relatively short non-ionic poly(glycerol monomethacrylate) (PGMA) precursor block leads to the formation of sterically-stabilized PGMA-PMOEMA spheres, worms or vesicles, depending on the precise reaction conditions. Construction of a suitable phase diagram enables each of these three morphologies to be reproducibly targeted at copolymer concentrations ranging from 10 to 30% w/w solids. High MOEMA conversions are achieved within 2 h at 70 °C, which makes this new PISA formulation well-suited for in situ SAXS studies using a new reaction cell. This bespoke cell enables efficient stirring and hence allows in situ monitoring during RAFT emulsion polymerization for the first time. For example, the onset of micellization and subsequent evolution in particle size can be studied when preparing PGMA29-PMOEMA30 spheres at 10% w/w solids. When targeting PGMA29-PMOEMA70 vesicles under the same conditions, both the micellar nucleation event and the subsequent evolution in the diblock copolymer morphology from spheres to worms to vesicles are observed. These new insights significantly enhance our understanding of the PISA mechanism during RAFT aqueous emulsion polymerization

    Testing accelerated experience-based co-design : a qualitative study of using a national archive of patient experience narrative interviews to promote rapid patient-centred service improvement

    Get PDF
    BACKGROUND: Measuring, understanding and improving patients’ experiences is of central importance to health care systems, but there is debate about the best methods for gathering and understanding patient experiences and how to then use them to improve care. Experience-based co-design (EBCD) has been evaluated as a successful approach to quality improvement in health care, drawing on video narrative interviews with local patients and involving them as equal partners in co-designing quality improvements. However, the time and cost involved have been reported as a barrier to adoption. The Health Experiences Research Group at the University of Oxford collects and analyses video and audio-recorded interviews with people about their experiences of illness. It now has a national archive of around 3000 interviews, covering around 75 different conditions or topics. Selected extracts from these interviews are disseminated for a lay audience on www.healthtalkonline.org. In this study, we set out to investigate whether or not this archive of interviews could replace the need for discovery interviews with local patients. OBJECTIVES: To use a national video and audio archive of patient experience narratives to develop, test and evaluate a rapid patient-centred service improvement approach (‘accelerated experience-based co-design’ or AEBCD). By using national rather than local patient interviews, we aimed to halve the overall cycle from 12 to 6 months, allowing for EBCD to be conducted in two clinical pathways rather than one. We observed how this affected the process and outcomes of the intervention. DESIGN: The intervention was an adapted form of EBCD, a participatory action research approach in which patients and staff work together to identify and implement quality improvements. The intervention retained all six components of EBCD, but used national trigger films, shortened the time frame and employed local service improvement facilitators. An ethnographic process evaluation was conducted, including observations, interviews, questionnaires, cost and documentary analysis including previous EBCD evaluation reports. SETTING: Intensive care and lung cancer services in two English NHS hospital trusts (Royal Berkshire and Royal Brompton and Harefield). PARTICIPANTS: Ninety-six clinical staff (primarily nursing and medical) and 63 patients and family members. INTERVENTION: For this accelerated intervention, the trigger film was derived from pre-existing national patient experience interviews. Local facilitators conducted staff discovery interviews. Thereafter, the process followed the usual EBCD pattern: the film was shown to local patients in a workshop meeting, and staff had a separate meeting to discuss the results of their feedback. Staff and patients then came together in a further workshop to view the film, agree priorities for improvement and set up co-design working groups to take these priorities forward. RESULTS: The accelerated approach proved readily acceptable to staff and patients; using films of national rather than local narratives did not adversely affect local NHS staff engagement, and may in some cases have made the process less threatening or challenging. Local patients felt that the national films generally reflected important themes, although a minority felt that they were more negative than their own personal experience. However, they served their purpose as a ‘trigger’ to discussion, and the resulting 48 co-design activities across the four pathways were similar in nature to those in EBCD but achieved at reduced cost. AEBCD was nearly half the cost of EBCD. However, where a trigger film already exists, pathways can be implemented for as little as 40% of the cost of traditional EBCD. It was not necessary to do additional work locally to supplement the national interviews. The intervention carried a ‘cost’ in terms of heavy workload and intensive activity for the local facilitators, but also brought benefits in terms of staff development/capacity-building. Furthermore, as in previous EBCDs, the approach was subsequently adopted in other clinical pathways in the trusts. CONCLUSIONS: Accelerated experience-based co-design delivered an accelerated version of EBCD, generating a comparable set of improvement activities. The national film acted as an effective trigger to the co-design process. Based on the results of the evaluation, AEBCD offers a rigorous and effective patient-centred quality improvement approach. We aim to develop further trigger films from the archived material as resources permit, and to investigate different ways of conducting the analysis (e.g. involving patients in doing the analysis)

    Veterinary students' usage and perception of video teaching resources

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>The purpose of our study was to use a student-centred approach to develop an online video learning resource (called 'Moo Tube') at the School of Veterinary Medicine and Science, University of Nottingham, UK and also to provide guidance for other academics in the School wishing to develop a similar resource in the future.</p> <p>Methods</p> <p>A focus group in the format of the nominal group technique was used to garner the opinions of 12 undergraduate students (3 from year-1, 4 from year-2 and 5 from year-3). Students generated lists of items in response to key questions, these responses were thematically analysed to generate key themes which were compared between the different year groups. The number of visits to 'Moo Tube' before and after an objective structured practical examination (OSPE) was also analysed to provide data on video usage.</p> <p>Results</p> <p>Students highlighted a number of strengths of video resources which can be grouped into four overarching themes: (1) teaching enhancement, (2) accessibility, (3) technical quality and (4) video content. Of these themes, students rated teaching enhancement and accessibility most highly. Video usage was seen to significantly increase (P < 0.05) prior to an examination and significantly decrease (P < 0.05) following the examination.</p> <p>Conclusions</p> <p>The students had a positive perception of video usage in higher education. Video usage increases prior to practical examinations. Image quality was a greater concern with year-3 students than with either year-1 or 2 students but all groups highlighted the following as important issues: i) good sound quality, ii) accessibility, including location of videos within electronic libraries, and iii) video content. Based on the findings from this study, guidelines are suggested for those developing undergraduate veterinary videos. We believe that many aspects of our list will have resonance in other areas of medicine education and higher education.</p

    Rational synthesis of epoxy-functional spheres, worms and vesicles by RAFT aqueous emulsion polymerisation of glycidyl methacrylate

    Get PDF
    The rational synthesis of epoxy-functional diblock copolymer nano-objects has been achieved via RAFT aqueous emulsion polymerisation of glycidyl methacrylate (GlyMA; aqueous solubility ∼22 g dm-3 at 50 °C) by utilising relatively mild conditions (pH 7, 50 °C) to preserve the epoxy groups. High monomer conversions were achieved within 1 h when using a poly(glycerol monomethacrylate) chain transfer agent with a mean degree of polymerisation (DP) of 28, with GPC analysis indicating relatively narrow molecular weight distributions (Mw/Mn < 1.40) when targeting PGlyMA DPs up to 80. A phase diagram was constructed to identify the synthesis conditions required to access pure spheres, worms or vesicles. Transmission electron microscopy, dynamic light scattering and small-angle X-ray scattering (SAXS) studies indicated the formation of well-defined worms and vesicles when targeting relatively long PGlyMA blocks. These epoxy-functional nano-objects were derivatised via epoxy-thiol chemistry by reaction with l-cysteine in aqueous solution. Finally, an in situ SAXS study was conducted during the RAFT aqueous emulsion polymerisation of GlyMA at 50 °C to examine the nucleation and size evolution of PGMA48-PGlyMA100 diblock copolymer spheres using a bespoke stirrable reaction cell

    A haplotype map of allohexaploid wheat reveals distinct patterns of selection on homoeologous genomes

    Get PDF
    BACKGROUND: Bread wheat is an allopolyploid species with a large, highly repetitive genome. To investigate the impact of selection on variants distributed among homoeologous wheat genomes and to build a foundation for understanding genotype-phenotype relationships, we performed population-scale re-sequencing of a diverse panel of wheat lines. RESULTS: A sample of 62 diverse lines was re-sequenced using the whole exome capture and genotyping-by-sequencing approaches. We describe the allele frequency, functional significance, and chromosomal distribution of 1.57 million single nucleotide polymorphisms and 161,719 small indels. Our results suggest that duplicated homoeologous genes are under purifying selection. We find contrasting patterns of variation and inter-variant associations among wheat genomes; this, in addition to demographic factors, could be explained by differences in the effect of directional selection on duplicated homoeologs. Only a small fraction of the homoeologous regions harboring selected variants overlapped among the wheat genomes in any given wheat line. These selected regions are enriched for loci associated with agronomic traits detected in genome-wide association studies. CONCLUSIONS: Evidence suggests that directional selection in allopolyploids rarely acted on multiple parallel advantageous mutations across homoeologous regions, likely indicating that a fitness benefit could be obtained by a mutation at any one of the homoeologs. Additional advantageous variants in other homoelogs probably either contributed little benefit, or were unavailable in populations subjected to directional selection. We hypothesize that allopolyploidy may have increased the likelihood of beneficial allele recovery by broadening the set of possible selection targets

    Addressing the climate challenge

    Get PDF
    In 2021, colleagues from across the University of Birmingham community were invited to write articles about topics relevant to the COP26 climate change summit. In this series of articles, experts from across many different disciplines provide new insight and evidence on how we might all understand and tackle climate change

    Effects of Anacetrapib in Patients with Atherosclerotic Vascular Disease

    Get PDF
    BACKGROUND: Patients with atherosclerotic vascular disease remain at high risk for cardiovascular events despite effective statin-based treatment of low-density lipoprotein (LDL) cholesterol levels. The inhibition of cholesteryl ester transfer protein (CETP) by anacetrapib reduces LDL cholesterol levels and increases high-density lipoprotein (HDL) cholesterol levels. However, trials of other CETP inhibitors have shown neutral or adverse effects on cardiovascular outcomes. METHODS: We conducted a randomized, double-blind, placebo-controlled trial involving 30,449 adults with atherosclerotic vascular disease who were receiving intensive atorvastatin therapy and who had a mean LDL cholesterol level of 61 mg per deciliter (1.58 mmol per liter), a mean non-HDL cholesterol level of 92 mg per deciliter (2.38 mmol per liter), and a mean HDL cholesterol level of 40 mg per deciliter (1.03 mmol per liter). The patients were assigned to receive either 100 mg of anacetrapib once daily (15,225 patients) or matching placebo (15,224 patients). The primary outcome was the first major coronary event, a composite of coronary death, myocardial infarction, or coronary revascularization. RESULTS: During the median follow-up period of 4.1 years, the primary outcome occurred in significantly fewer patients in the anacetrapib group than in the placebo group (1640 of 15,225 patients [10.8%] vs. 1803 of 15,224 patients [11.8%]; rate ratio, 0.91; 95% confidence interval, 0.85 to 0.97; P=0.004). The relative difference in risk was similar across multiple prespecified subgroups. At the trial midpoint, the mean level of HDL cholesterol was higher by 43 mg per deciliter (1.12 mmol per liter) in the anacetrapib group than in the placebo group (a relative difference of 104%), and the mean level of non-HDL cholesterol was lower by 17 mg per deciliter (0.44 mmol per liter), a relative difference of -18%. There were no significant between-group differences in the risk of death, cancer, or other serious adverse events. CONCLUSIONS: Among patients with atherosclerotic vascular disease who were receiving intensive statin therapy, the use of anacetrapib resulted in a lower incidence of major coronary events than the use of placebo. (Funded by Merck and others; Current Controlled Trials number, ISRCTN48678192 ; ClinicalTrials.gov number, NCT01252953 ; and EudraCT number, 2010-023467-18 .)

    Wheat root systems as a breeding target for climate resilience

    Get PDF
    In the coming decades, larger genetic gains in yield will be necessary to meet projected demand, and this must be achieved despite the destabilizing impacts of climate change on crop production. The root systems of crops capture the water and nutrients needed to support crop growth, and improved root systems tailored to the challenges of specific agricultural environments could improve climate resiliency. Each component of root initiation, growth and development is controlled genetically and responds to the environment, which translates to a complex quantitative system to navigate for the breeder, but also a world of opportunity given the right tools. In this review, we argue that it is important to know more about the ‘hidden half’ of crop plants and hypothesize that crop improvement could be further enhanced using approaches that directly target selection for root system architecture. To explore these issues, we focus predominantly on bread wheat (Triticum aestivum L.), a staple crop that plays a major role in underpinning global food security. We review the tools available for root phenotyping under controlled and field conditions and the use of these platforms alongside modern genetics and genomics resources to dissect the genetic architecture controlling the wheat root system. To contextualize these advances for applied wheat breeding, we explore questions surrounding which root system architectures should be selected for, which agricultural environments and genetic trait configurations of breeding populations are these best suited to, and how might direct selection for these root ideotypes be implemented in practice
    corecore