Distribution of polymer-coated gold nanoparticles in a 3D lung model and indication of apoptosis after repeated exposure

Aim: The distribution and impact of aerosol-delivered gold nanoparticles (AuNPs) functionalized with a mixture of aminated-polyvinyl alcohol and amino-PEG ([polyvinyl alcohol/PEG]-NH2) upon repeated administration onto a 3D lung model were explored. Materials & methods: AuNPs were aerosolized and uptake and epithelial translocation was assessed by inductively coupled plasma optical-emission spectroscopy, flow cytometry and electron microscopy. In addition, cytotoxicity, apoptosis and proinflammation were evaluated. Results: Repeated AuNP aerosolization resulted in NP accumulation in macrophages and epithelial cells. Dendritic cells demonstrated substantial NP internalization after single administration which was reduced in later time points. No cytotoxicity or proinflammation was observed but after 96 h significant apoptosis was induced by the polymer coating. Conclusion: These results indicate the importance of repeated exposures in addressing potential effects of NPs

Aerosol delivery of functionalized gold nanoparticles target and activate dendritic cells in a 3D lung cellular model

Nanocarrier design combined with pulmonary drug delivery holds great promise for the treatment of respiratory tract disorders. In particular, targeting of dendritic cells that are key immune cells to enhance or suppress an immune response in the lung is a promising approach for the treatment of allergic diseases. Fluorescently encoded poly(vinyl alcohol) (PVA)-coated gold nanoparticles, functionalized with either negative (−COO–) or positive (−NH3+) surface charges, were functionalized with a DC-SIGN antibody on the particle surface, enabling binding to a dendritic cell surface receptor. A 3D coculture model consisting of epithelial and immune cells (macrophages and dendritic cells) mimicking the human lung epithelial tissue barrier was employed to assess the effects of aerosolized AuNPs. PVA-NH2 AuNPs showed higher uptake compared to that of their −COOH counterparts, with the highest uptake recorded in macrophages, as shown by flow cytometry. None of the AuNPs induced cytotoxicity or necrosis or increased cytokine secretion, whereas only PVA-NH2 AuNPs induced higher apoptosis levels. DC-SIGN AuNPs showed significantly increased uptake by monocyte-derived dendritic cells (MDDCs) with subsequent activation compared to non-antibody-conjugated control AuNPs, independent of surface charge. Our results show that DC-SIGN conjugation to the AuNPs enhanced MDDC targeting and activation in a complex 3D lung cell model. These findings highlight the potential of immunoengineering approaches to the targeting and activation of immune cells in the lung by nanocarriers

In vitro-ex vivo model systems for nanosafety assessment

Engineered nanomaterials have unique and novel properties enabling wide-ranging new applications in nearly all fields of research. As these new properties have raised concerns about potential adverse effects for the environment and human health, extensive efforts are underway to define reliable, cost- and time-effective, as well as mechanistic-based testing strategies to replace the current method of animal testing, which is still the most prevalent model used for the risk assessment of chemicals. Current approaches for nanomaterials follow this line. The aim of this review is to explore and qualify the relevance of new in vitro and ex vivo models in (nano)material safety assessment, a crucial prerequisite for translation into applications

Hazard Assessment of Abraded Thermoplastic Composites Reinforced with Reduced Graphene Oxide

Graphene-related materials (GRMs) are subject to intensive investigations and considerable progress has been made in recent years in terms of safety assessment. However, limited information is available concerning the hazard potential of GRM-containing products such as graphene-reinforced composites. In the present study, we conducted a comprehensive investigation of the potential biological effects of particles released through an abrasion process from reduced graphene oxide (rGO)-reinforced composites of polyamide 6 (PA6), a widely used engineered thermoplastic polymer, in comparison to as-produced rGO. First, a panel of well-established in vitro models, representative of the immune system and possible target organs such as the lungs, the gut, and the skin, was applied. Limited responses to PA6-rGO exposure were found in the different in vitro models. Only as-produced rGO induced substantial adverse effects, in particular in macrophages. Since inhalation of airborne materials is a key occupational concern, we then sought to test whether the in vitro responses noted for these materials would translate into adverse effects in vivo. To this end, the response at 1, 7 and 28 days after a single pulmonary exposure was evaluated in mice. In agreement with the in vitro data, PA6-rGO induced a modest and transient pulmonary inflammation, resolved by day 28. In contrast, rGO induced a longer-lasting, albeit moderate inflammation that did not lead to tissue remodeling within 28 days. Taken together, the present study suggests a negligible impact on human health under acute exposure conditions of GRM fillers such as rGO when released from composites at doses expected at the workplace

Air–Liquid Interface In Vitro Models for Respiratory Toxicology Research: Consensus Workshop and Recommendations

In vitro air–liquid interface (ALI) cell culture models can potentially be used to assess inhalation toxicology endpoints and are usually considered, in terms of relevancy, between classic (i.e., submerged) in vitro models and animal-based models. In some situations that need to be clearly defined, ALI methods may represent a complement or an alternative option to in vivo experimentations or classic in vitro methods. However, it is clear that many different approaches exist and that only very limited validation studies have been carried out to date. This means comparison of data from different methods is difficult and available methods are currently not suitable for use in regulatory assessments. This is despite inhalation toxicology being a priority area for many governmental organizations. In this setting, a 1-day workshop on ALI in vitro models for respiratory toxicology research was organized in Paris in March 2016 to assess the situation and to discuss what might be possible in terms of validation studies. The workshop was attended by major parties in Europe and brought together more than 60 representatives from various academic, commercial, and regulatory organizations. Following plenary, oral, and poster presentations, an expert panel was convened to lead a discussion on possible approaches to validation studies for ALI inhalation models. A series of recommendations were made and the outcomes of the workshop are reported

Biological response of an in vitro human 3D lung cell model exposed to brake wear debris varies based on brake pad formulation

Wear particles from automotive friction brake pads of various sizes, morphology, and chemical composition are significant contributors towards particulate matter. Knowledge concerning the potential adverse effects following inhalation exposure to brake wear debris is limited. Our aim was, therefore, to generate brake wear particles released from commercial low-metallic and non-asbestos organic automotive brake pads used in mid-size passenger cars by a full-scale brake dynamometer with an environmental chamber simulating urban driving and to deduce their potential hazard in vitro. The collected fractions were analysed using scanning electron microscopy via energy-dispersive X-ray spectroscopy (SEM-EDS) and Raman microspectroscopy. The biological impact of the samples was investigated using a human 3D multicellular model consisting of human epithelial cells (A549) and human primary immune cells (macrophages and dendritic cells) mimicking the human epithelial tissue barrier. The viability, morphology, oxidative stress, and (pro-)inflammatory response of the cells were assessed following 24 h exposure to similar to 12, similar to 24, and similar to 48 A mu g/cm(2) of non-airborne samples and to similar to 3.7 A mu g/cm(2) of different brake wear size fractions (2-4, 1-2, and 0.25-1 A mu m) applying a pseudo-air-liquid interface approach. Brake wear debris with low-metallic formula does not induce any adverse biological effects to the in vitro lung multicellular model. Brake wear particles from non-asbestos organic formulated pads, however, induced increased (pro-)inflammatory mediator release from the same in vitro system. The latter finding can be attributed to the different particle compositions, specifically the presence of anatase.Web of Science9272351233

Effects of environmental synchrony and density-dependent dispersal on temporal and spatial slopes of Taylor's law

Taylor's law (TL) is an empirical rule that describes an approximate relationship between the variance and mean of population density: log(10)(variance) approximate to log(10)(a) + b x log(10)(mean). Population synchrony is another prevailing feature observed in empirical populations. This study investigated the effects of environmental synchrony and density-dependent dispersal on the temporal (b( T)) and spatial (b( S)) slopes of TL, using an empirical dataset of gray-sided vole populations and simulation analyses based on the second-order autoregressive (AR) model. Eighty-five empirical populations satisfied the temporal and spatial TLs with b( T) = 1.943 (+/- SE 0.143) and b( S) = 1.579 (+/- SE 0.136). The pairwise synchrony of population was 0.377 +/- 0.199 (mean +/- SD). Most simulated populations that obeyed the AR model satisfied the form of the temporal and spatial TLs without being affected by the environmental synchrony and density-dependent dispersal; however, those simulated slopes were too steep. The incorporation of environmental synchrony resulted in reduced simulated slopes, but those slopes, too, were still unrealistically steep. By incorporating density-dependent dispersal, simulated slopes decreased and fell within a realistic range. However, the simulated populations without environmental synchrony did not exhibit an adequate degree of density synchrony. In simulations that included both environmental synchrony and density-dependent dispersal, 92.7% of the simulated datasets provided realistic values for b( T), b( S) and population synchrony. Because the two slopes were more sensitive to the variation of density-dependent dispersal than that of environmental synchrony, density-dependent dispersal may be the key to the determination of b( T) and b( S)