Martensite structures and twinning in substrate-constrained epitaxial Ni-Mn-Ga films deposited by a magnetron co-sputtering process

In order to obtain Ni-Mn-Ga epitaxial films crystallized in martensite structures showing Magnetic-Induced Rearrangement (MIR) of martensite variants, a fine control of the composition is required. Here we present how the co-sputtering process might be helpful in the development of Ni-Mn-Ga epitaxial films. A batch of epitaxial Ni-Mn-Ga films deposited by co-sputtering of a Ni-Mn-Ga ternary target and a pure manganese target has been studied. The co-sputtering process allows a precise control of the film compositions and enables keeping the epitaxial growth of Ni-Mn-Ga austenite during deposition at high temperature. It gives rise to tune the content of the MIR-active 14-modulated martensite in the film at room temperature, as well as micro and macro-twinned domains sizes

Ni-Mn-Ga films in the austenite and the martensite structures at room temperature: Uniaxial texturation and epitaxial growth

Ni-Mn-Ga films in the austenite and the martensite structures at room temperature have been obtained using the DC magnetron sputtering technique. Two elaboration processes were studied. A first batch of samples was deposited using a resist sacrificial layer in order to release the film from the substrate before vacuum annealing. This process leads to polycrystalline films with a strong (022) fiber texture. The martensitic phase transformation of such polycrystalline freestanding films has been studied by optical and scanning electron microscopy. A second batch of samples was grown epitaxially on (100)MgO substrates using different deposition temperatures. The texture has been analyzed with four-circle X-ray diffraction. Epitaxial films crystallized both in the austenite and the martensite structures at room temperature have been studied

Tuning macro-twinned domain sizes and the b-variants content of the adaptive 14-modulated martensite in epitaxial Ni-Mn-Ga films by co-sputtering

In order to obtain modulated-martensite in our epitaxial Ni-Mn-Ga films, we have tuned the composition by using a co-sputtering process. Here we present how the composition affects the variant distribution of the 14-modulated martensite at room temperature. The nature of such modulated-martensites is still strongly debated for magnetic shape memory alloys. It has been very recently demonstrated that the modulated-martensites in Ni-Mn-Ga are adaptive phases. The results presented here corroborate this theory for the first time, for three different compositions. Moreover, we demonstrate with the help of the adaptive modulations theory that b-variants of the 14-modulated martensite form close to the free-surface of the film to release the stress induced by branching of macro-twinned domains during the martensitic transformation on a rigid substrate. At room temperature, the content of such b-variants is found to strongly decrease when the macro-twinned domain sizes increase

Powder processing methodology for fabrication of Copper/Graphite composite materials with enhanced thermal properties

International audienceThis study focuses on the powder processing methodology (PPM) for the fabrication of metal matrix composite using Graphite flakes (Grf) reinforced Copper (Cu). The manufacturing route involved (1) a reductive treatment of Grf powder to purify and increase its quality, (2) the mixing of the Cu and the Grf (0–40 vol%) powders with a fast and efficient Resonant Acoustic (RA) mixer, and finally (3) the cold and hot-pressing of composite powders. Comparison of PPM is made with literature and a usual method used in our laboratory. The quality of Grf after different steps was analyzed by Raman spectroscopy and XRD. Microstructure of the composite materials were analyzed by SEM. It was shown that this new PPM demonstrated better composite structural and thermal properties even at low volume fraction of Grf with a maximum of 630 W·m−1·K−1 obtained with 40 vol% of Grf at 70 °C

Fabrication and characterization of a Ni-Mn-Ga uniaxially textured freestanding film deposited by DC magnetron sputtering

Homogeneous freestanding films have been obtained by the direct current (DC) magnetron sputtering technique using a sacrificial layer. After annealing, the films are crystallized with a strong out-of-plane texture along the (022) direction. The stoichiometry of the annealed films is close to the target composition and leads to a martensitic transformation around 255K. The annealed films demonstrate ferromagnetic behavior with a Curie temperature of about 362K. The magnetization process has been studied on the both states and during the martensitic transition. The saturation magnetizations have been determined by fitting the experimental data with a saturation approach law in the range 1-5T. Results show the saturation magnetization of the martensite is around 10% higher than that of the austenite. A model based on intrinsic magnetic properties of each state allowing the description of the magnetization M=f (H, T) of such polycrystalline films during the martensitic transformation is presented. The mass fraction of martensite inside the austenite phase can be determined using this model. The shape memory effect is analyzed both by scanning electron microscopy and by optical microscopy with in-situ measurement of the resistance temperature dependence

Multi-loci diagnosis of acute lymphoblastic leukaemia with high-throughput sequencing and bioinformatics analysis

International audienceHigh-throughput sequencing (HTS) is considered a technical revolution that has improved our knowledge of lymphoid and autoimmune diseases, changing our approach to leukaemia both at diagnosis and during follow-up. As part of an immunoglobulin/T cell receptor-based minimal residual disease (MRD) assessment of acute lymphoblastic leukaemia patients, we assessed the performance and feasibility of the replacement of the first steps of the approach based on DNA isolation and Sanger sequencing, using a HTS protocol combined with bioinformatics analysis and visualization using the Vidjil software. We prospectively analysed the diagnostic and relapse samples of 34 paediatric patients, thus identifying 125 leukaemic clones with recombinations on multiple loci (TRG, TRD, IGH and IGK), including Dd2/Dd3 and Intron/KDE rearrangements. Sequencing failures were halved (14% vs. 34%, P = 0.0007), enabling more patients to be monitored. Furthermore, more markers per patient could be monitored, reducing the probability of false negative MRD results. The whole analysis, from sample receipt to clinical validation, was shorter than our current diagnostic protocol, with equal resources. V(D)J recombination was successfully assigned by the software, even for unusual recombinations. This study emphasizes the progress that HTS with adapted bioinformatics tools can bring to the diagnosis of leukaemia patients

Fast multiclonal clusterization of V(D)J recombinations from high-throughput sequencing

International audienceBACKGROUND: V(D)J recombinations in lymphocytes are essential for immunological diversity. They are also usefulmarkers of pathologies. In leukemia, they are used to quantify the minimal residual disease duringpatient follow-up. However, the full breadth of lymphocyte diversity is not fully understood. RESULTS: We propose new algorithms that process high-throughput sequencing (HTS) data to extract unnamedV(D)J junctions and gather them into clones for quantification. This analysis is based on a seedheuristic and is fast and scalable because in the first phase, no alignment is performed with germlinedatabase sequences. The algorithms were applied to TR HTS data from a patient with acutelymphoblastic leukemia, and also on data simulating hypermutations. Our methods identified themain clone, as well as additional clones that were not identified with standard protocols. CONCLUSIONS: The proposed algorithms provide new insight into the analysis of high-troughput sequencing data forleukemia, and also to the quantitative assessment of any immunological profile. The methodsdescribed here are implemented in a C++ open-source program called Vidjil

Fast multiclonal clusterization of V(D)J recombinations from high-throughput sequencing

International audienceBACKGROUND: V(D)J recombinations in lymphocytes are essential for immunological diversity. They are also usefulmarkers of pathologies. In leukemia, they are used to quantify the minimal residual disease duringpatient follow-up. However, the full breadth of lymphocyte diversity is not fully understood. RESULTS: We propose new algorithms that process high-throughput sequencing (HTS) data to extract unnamedV(D)J junctions and gather them into clones for quantification. This analysis is based on a seedheuristic and is fast and scalable because in the first phase, no alignment is performed with germlinedatabase sequences. The algorithms were applied to TR HTS data from a patient with acutelymphoblastic leukemia, and also on data simulating hypermutations. Our methods identified themain clone, as well as additional clones that were not identified with standard protocols. CONCLUSIONS: The proposed algorithms provide new insight into the analysis of high-troughput sequencing data forleukemia, and also to the quantitative assessment of any immunological profile. The methodsdescribed here are implemented in a C++ open-source program called Vidjil

: Recueil de fiches pédagogiques du réseau MAPS

DoctoralLe réseau thématique MAPS «Modélisation multi-Agent appliquée aux Phénomènes Spatialisés » propose depuis 2009 des évènements scientifiques ayant pour but de diffuser les pratiques de modélisations multi-agents au sein des Sciences de l’Homme et de la Société (SHS). Ce collectif pluridisciplinaire de chercheurs, d’enseignants-chercheurs et de doctorants est labellisé en tant que ≪ réseau thématique » par le Réseau National des Systèmes Complexes (GIS RNSC) et bénéficie du soutien du CNRS au titre de la Formation Permanente. Depuis 2009, plusieurs modèles ont été développés au cours d'événements MAPS. Ces modèles ont fait l'objet de fiches pédagogiques détaillées destinées aux communautés éducatives et universitaires et en particulier aux enseignants qui souhaiteraient faire découvrir la modélisation à leurs étudiants, mais aussi à ceux qui envisagent d’approfondir certains aspects avec un public plus averti. Elles sont également destinées à tous les curieux qui souhaiteraient découvrir ce que la modélisation apporte aux SHS, du point de vue heuristique et du point de vue opérationnel. Enfin, elles sont aussi des supports pour toutes les personnes qui souhaiteraient diffuser les réflexions scientifiques sur la modélisation et la simulation qui ont présidé à la rédaction de ces fiches

Systeme CuO-Bi_2O_3-Sb_2O_3 - Structures et proprietes electriques des ceramiques de type pyrochlore M"I"IM_1_,_5"I"I"IM_1_,_5"VO_7 (M"I"I=Cu, Zn, Cd; M"I"I"I=Bi, Y, Gd; M"V=Sb, Nb)

SIGLEINIST T 74342 / INIST-CNRS - Institut de l'Information Scientifique et TechniqueFRFranc