829 research outputs found
Initial results from the HARP experiment at CERN
Initial results on particle yields obtained by the HARP experiment are
presented. The measurements correspond to proton--nucleus collisions at beam
energies of 12.9 and for a thin Al target of 5% interacion legth. The
angular range considered is between 10 and 250 . This results are the
first step in the upcoming measurement of the forward production cross-section
for the same target and beam energy, relevant for the calculation of the
far--to--near ratio of the K2K experiment.Comment: Presented at the Neutrino 2004 Internation Conferenc
Sliding Singlet Mechanism Revisited
We show that the unification of the doublet Higgs in the standard model (SM)
and the Higgs to break the grand unified theory (GUT) group stabilizes the
sliding singlet mechanism which can solve the doublet-triplet (DT) splitting
problem. And we generalize this attractive mechanism to apply it to many
unified scenarios. In this paper, we try to build various concrete E_6 unified
models by using the generalized sliding singlet mechanism.Comment: 13 page
Planck-Scale Physics and Neutrino Masses
We discuss gravitationally induced masses and mass splittings of Majorana,
Zeldovich-Konopinski-Mahmoud and Dirac neutrinos. Among other implications,
these effects can provide a solution of the solar neutrino puzzle. In
particular, we show how this may work in the 17 keV neutrino picture.Comment: 10 pages, IC/92/79, SISSA-83/92/EP, LMU-04/92 (the preprint number
has been corrected; no other changes
A survey of partial differential equations in geometric design
YesComputer aided geometric design is an area
where the improvement of surface generation techniques
is an everlasting demand since faster and more accurate
geometric models are required. Traditional methods
for generating surfaces were initially mainly based
upon interpolation algorithms. Recently, partial differential
equations (PDE) were introduced as a valuable
tool for geometric modelling since they offer a number
of features from which these areas can benefit. This work
summarises the uses given to PDE surfaces as a surface
generation technique togethe
Balloon Measurements of Cosmic Ray Muon Spectra in the Atmosphere along with those of Primary Protons and Helium Nuclei over Mid-Latitude
We report here the measurements of the energy spectra of atmospheric muons
and of the cosmic ray primary proton and helium nuclei in a single experiment.
These were carried out using the MASS superconducting spectrometer in a balloon
flight experiment in 1991. The relevance of these results to the atmospheric
neutrino anomaly is emphasized. In particular, this approach allows
uncertainties caused by the level of solar modulation, the geomagnetic cut-off
of the primaries and possible experimental systematics to be decoupled in the
comparison of calculated fluxes of muons to measured muon fluxes. The muon
observations cover the momentum and depth ranges of 0.3-40 GeV/c and 5-886
g/cmsquared, respectively. The proton and helium primary measurements cover the
rigidity range from 3 to 100 GV, in which both the solar modulation and the
geomagnetic cut-off affect the energy spectra at low energies.Comment: 31 pages, including 17 figures, simplified apparatus figure, to
appear in Phys. Rev.
Large-angle production of charged pions by 3 GeV/c - 12.9 GeV/c protons on beryllium, aluminium and lead targets
Measurements of the double-differential production cross-section
in the range of momentum 100 \MeVc \leq p < 800 \MeVc and angle 0.35 \rad
\leq \theta < 2.15 \rad in proton--beryllium, proton--aluminium and
proton--lead collisions are presented. The data were taken with the HARP
detector in the T9 beam line of the CERN PS. The pions were produced by proton
beams in a momentum range from 3 \GeVc to 12.9 \GeVc hitting a target with a
thickness of 5% of a nuclear interaction length. The tracking and
identification of the produced particles was performed using a small-radius
cylindrical time projection chamber (TPC) placed inside a solenoidal magnet.
Incident particles were identified by an elaborate system of beam detectors.
Results are obtained for the double-differential cross-sections at six incident
proton beam momenta (3 \GeVc, 5 \GeVc, 8 \GeVc, 8.9 \GeVc (Be only), 12 \GeVc
and 12.9 \GeVc (Al only)) and compared to previously available data
Measuring spatial pressure distribution from explosives buried in dry Leighton Buzzard sand
Direct measurement of the intense loading produced by the detonation of a buried explosive is an extremely difficult task. Historically, high-fidelity measurement techniques have not been sufficiently robust to capture the extremely high pressures associated with such events, and researchers have relied on ‘global’ measurements such as the average loading acting over a particular area of interest. Recently, a large-scale experimental approach to the direct measurement of the spatial and temporal variation in loading resulting from an explosive event has been developed, which utilises Hopkinson pressure bars (HPBs) inserted through holes in a large target plate such that their faces lie flush with the loaded face. This article presents results from ten experiments conducted at 1/4 scale, using 17 HPBs to measure the spatial pressure distribution from explosives buried in dry Leighton Buzzard sand, a commonly available sand used in many geotechnical applications. Localised pressure measurements are used in conjunction with high speed video to provide a detailed examination of the physical processes occurring at the loaded face, as well allowing quantification of these effects. Example pressure–time and impulse–time traces are provided in full to allow researchers to use this data for validation of numerical modelling approaches
Measurement of the production of charged pions by protons on a tantalum target
A measurement of the double-differential cross-section for the production of
charged pions in proton--tantalum collisions emitted at large angles from the
incoming beam direction is presented. The data were taken in 2002 with the HARP
detector in the T9 beam line of the CERN PS. The pions were produced by proton
beams in a momentum range from 3 \GeVc to 12 \GeVc hitting a tantalum target
with a thickness of 5% of a nuclear interaction length. The angular and
momentum range covered by the experiment (100 \MeVc \le p < 800 \MeVc and
0.35 \rad \le \theta <2.15 \rad) is of particular importance for the design
of a neutrino factory. The produced particles were detected using a
small-radius cylindrical time projection chamber (TPC) placed in a solenoidal
magnet. Track recognition, momentum determination and particle identification
were all performed based on the measurements made with the TPC. An elaborate
system of detectors in the beam line ensured the identification of the incident
particles. Results are shown for the double-differential cross-sections
at four incident
proton beam momenta (3 \GeVc, 5 \GeVc, 8 \GeVc and 12 \GeVc). In addition, the
pion yields within the acceptance of typical neutrino factory designs are shown
as a function of beam momentum. The measurement of these yields within a single
experiment eliminates most systematic errors in the comparison between rates at
different beam momenta and between positive and negative pion production.Comment: 49 pages, 31 figures. Version accepted for publication on Eur. Phys.
J.
Forward production of charged pions with incident on nuclear targets measured at the CERN PS
Measurements of the double-differential production cross-section
in the range of momentum 0.5 \GeVc \leq p \le 8.0 \GeVc and angle 0.025 \rad
\leq \theta \le 0.25 \rad in interactions of charged pions on beryllium,
carbon, aluminium, copper, tin, tantalum and lead are presented. These data
represent the first experimental campaign to systematically measure forward
pion hadroproduction. The data were taken with the large acceptance HARP
detector in the T9 beam line of the CERN PS. Incident particles, impinging on a
5% nuclear interaction length target, were identified by an elaborate system of
beam detectors. The tracking and identification of the produced particles was
performed using the forward spectrometer of the HARP detector. Results are
obtained for the double-differential cross-sections mainly at four incident pion beam
momenta (3 \GeVc, 5 \GeVc, 8 \GeVc and 12 \GeVc). The measurements are compared
with the GEANT4 and MARS Monte Carlo simulationComment: to be published on Nuclear Physics
Large-angle production of charged pions by 3 GeV/c - 12 GeV/c protons on carbon, copper and tin targets
A measurement of the double-differential production cross-section
in proton--carbon, proton--copper and proton--tin collisions in the range of
pion momentum 100 \MeVc \leq p < 800 \MeVc and angle 0.35 \rad \le \theta
<2.15 \rad is presented. The data were taken with the HARP detector in the T9
beam line of the CERN PS. The pions were produced by proton beams in a momentum
range from 3 \GeVc to 12 \GeVc hitting a target with a thickness of 5% of a
nuclear interaction length. The tracking and identification of the produced
particles was done using a small-radius cylindrical time projection chamber
(TPC) placed in a solenoidal magnet. An elaborate system of detectors in the
beam line ensured the identification of the incident particles. Results are
shown for the double-differential cross-sections at four incident proton beam
momenta (3 \GeVc, 5 \GeVc, 8 \GeVc and 12 \GeVc)
- …