Physical characterisation of southern massive star-forming regions using Parkes NH3_3 observations

We have undertaken a Parkes ammonia spectral line study, in the lowest two inversion transitions, of southern massive star formation regions, including young massive candidate protostars, with the aim of characterising the earliest stages of massive star formation. 138 sources from the submillimetre continuum emission studies of Hill et al., were found to have robust (1,1) detections, including two sources with two velocity components, and 102 in the (2,2) transition. We determine the ammonia line properties of the sources: linewidth, flux density, kinetic temperature, NH$_3$ column density and opacity, and revisit our SED modelling procedure to derive the mass for 52 of the sources. By combining the continuum emission information with ammonia observations we substantially constrain the physical properties of the high-mass clumps. There is clear complementarity between ammonia and continuum observations for derivations of physical parameters. The MM-only class, identified in the continuum studies of Hill et al., display smaller sizes, mass and velocity dispersion and/or turbulence than star-forming clumps, suggesting a quiescent prestellar stage and/or the formation of less massive stars.Comment: 20 pages, 9 Figures, 1 appendix (to appear in full online only, a sample appendix in the paper); 7 tables. Accepted by MNRA

Spectral energy distribution modelling of Southern candidate massive protostars using the Bayesian inference method

Concatenating data from the millimetre regime to the infrared, we have performed spectral energy distribution modelling for 227 of the 405 millimetre continuum sources of Hill et al. (2005) which are thought to contain young massive stars in the earliest stages of their formation. Three main parameters are extracted from the fits: temperature, mass and luminosity. The method employed was Bayesian inference, which allows a statistically probable range of suitable values for each parameter to be drawn for each individual protostellar candidate. This is the first application of this method to massive star formation. The cumulative distribution plots of the SED modelled parameters in this work indicate that collectively, the sources without methanol maser and/or radio continuum associations (MM-only cores) display similar characteristics to those of high mass star formation regions. Attributing significance to the marginal distinctions between the MM-only cores and the high-mass star formation sample we draw hypotheses regarding the nature of the MM-only cores, including the possibility that the population itself is comprised of different types of source, and discuss their role in the formation scenarios of massive star formation. In addition, we discuss the usefulness and limitations of SED modelling and its application to the field. From this work, it is clear that within the valid parameter ranges, SEDs utilising current far-infrared data can not be used to determine the evolution of massive protostars or massive young stellar objects.Comment: 16 pages, 3 figures, 5 tables : accepted by MNRA

Star formation triggered by the Galactic HII region RCW 120: First results from the Herschel Space Observatory

By means of different physical mechanisms, the expansion of HII regions can promote the formation of new stars of all masses. RCW 120 is a nearby Galactic HII region where triggered star formation occurs. This region is well-studied - there being a wealth of existing data - and is nearby. However, it is surrounded by dense regions for which far infrared data is essential to obtain an unbiased view of the star formation process and in particular to establish whether very young protostars are present. We attempt to identify all Young Stellar Objects (YSOs), especially those previously undetected at shorter wavelengths, to derive their physical properties and obtain insight into the star formation history in this region. We use Herschel-PACS and -SPIRE images to determine the distribution of YSOs observed in the field. We use a spectral energy distribution fitting tool to derive the YSOs physical properties. Herschel-PACS and -SPIRE images confirm the existence of a young source and allow us to determine its nature as a high-mass (8-10 MSun) Class 0 object (whose emission is dominated by a massive envelope) towards the massive condensation 1 observed at (sub)-millimeter wavelengths. This source was not detected at 24 micron and only barely seen in the MISPGAL 70 micron data. Several other red sources are detected at Herschel wavelengths and coincide with the peaks of the millimeter condensations. SED fitting results for the brightest Herschel sources indicate that, apart from the massive Class 0 that forms in condensation 1, young low mass stars are forming around RCW 120. The YSOs observed on the borders of RCW 120 are younger than its ionizing star, which has an age of about 2.5 Myr.Comment: 5 pqges, 3 figures, accepted by A&A (Special issue on the Herschel first results

Profiling filaments: comparing near-infrared extinction and submillimetre data in TMC-1

Interstellar filaments are an important part of star formation. To understand the structure of filaments, cross-section profiles are often fitted with Plummer profiles. This profiling is often done with submm studies, such as Herschel. It would be convenient if filament properties could also be studied using groundbased NIR data. We compare the filament profiles obtained by NIR extinction and submm observations to find out if reliable profiles can be derived using NIR data. We use J-, H-, and K-band data of a filament north of TMC-1 to derive an extinction map from colour excesses of background stars. We compare the Plummer profiles obtained from extinction maps with Herschel dust emission maps. We present 2 methods to estimate profiles from NIR: Plummer profile fits to median Av of stars or directly to the Av of individual stars. We compare the methods by simulations. In simulations extinction maps and the new methods give correct results to within ~10-20 for modest densities. Direct fit to data on individual stars gives more accurate results than extinction map, and can work in higher density. In profile fits to real observations, values of Plummer parameters are generally similar to within a factor of ~2. Although parameter values can vary significantly, estimates of filament mass usually remain accurate to within some tens of per cent. Our results for TMC-1 are in agreement with earlier results. High resolution NIR data give more details, but 2MASS data can be used to estimate profiles. NIR extinction can be used as an alternative to submm observations to profile filaments. Direct fits of stars can also be a valuable tool. Plummer profile parameters are not always well constrained, and caution should be taken when making fits. In the evaluation of Plummer parameters, one can use the independence of dust emission and NIR data and the difference in the shapes of the confidence regions.Comment: accepted to Astronomy & Astrophysics; abstract has been shortened for astrop

The M16 molecular complex under the influence of NGC6611. Herschel's perspective of the heating effect on the Eagle Nebula

We present Herschel images from the HOBYS key program of the Eagle Nebula (M16) in the far-infrared and sub-millimetre, using the PACS and SPIRE cameras at 70{\mu}m, 160{\mu}m, 250{\mu}m, 350{\mu}m, 500{\mu}m. M16, home to the Pillars of Creation, is largely under the influence of the nearby NGC6611 high-mass star cluster. The Herschel images reveal a clear dust temperature gradient running away from the centre of the cavity carved by the OB cluster. We investigate the heating effect of NGC6611 on the entire M16 star-forming complex seen by Herschel including the diffuse cloud environment and the dense filamentary structures identified in this region. In addition, we interpret the three-dimensional geometry of M16 with respect to the nebula, its surrounding environment, and the NGC6611 cavity. The dust temperature and column density maps reveal a prominent eastern filament running north-south and away from the high-mass star-forming central region and the NGC6611 cluster, as well as a northern filament which extends around and away from the cluster. The dust temperature in each of these filaments decreases with increasing distance from the NGC6611 cluster, indicating a heating penetration depth of \sim 10 pc in each direction in 3 - 6 \times 10^{22} cm-2 column density filaments. We show that in high-mass star-forming regions OB clusters impact the temperature of future star-forming sites, modifying the initial conditions for collapse and effecting the evolutionary criteria of protostars developed from spectral energy distributions. Possible scenarios for the origin of the morphology seen in this region are discussed, including a western equivalent to the eastern filament, which was destroyed by the creation of the OB cluster and its subsequent winds and radiation.Comment: 12 pages, including 3 appendix, 9 figures, accepted by A&

Evidence of triggered star formation in G327.3-0.6. Dust-continuum mapping of an infrared dark cloud with P-ArT\'eMiS

Aims. Expanding HII regions and propagating shocks are common in the environment of young high-mass star-forming complexes. They can compress a pre-existing molecular cloud and trigger the formation of dense cores. We investigate whether these phenomena can explain the formation of high-mass protostars within an infrared dark cloud located at the position of G327.3-0.6 in the Galactic plane, in between two large infrared bubbles and two HII regions. Methods: The region of G327.3-0.6 was imaged at 450 ? m with the CEA P-ArT\'eMiS bolometer array on the Atacama Pathfinder EXperiment telescope in Chile. APEX/LABOCA and APEX-2A, and Spitzer/IRAC and MIPS archives data were used in this study. Results: Ten massive cores were detected in the P-ArT\'eMiS image, embedded within the infrared dark cloud seen in absorption at both 8 and 24 ?m. Their luminosities and masses indicate that they form high-mass stars. The kinematical study of the region suggests that the infrared bubbles expand toward the infrared dark cloud. Conclusions: Under the influence of expanding bubbles, star formation occurs in the infrared dark areas at the border of HII regions and infrared bubbles.Comment: 4 page

The Pipe Nebula as seen with Herschel: Formation of filamentary structures by large-scale compression ?

A growing body of evidence indicates that the formation of filaments in interstellar clouds is a key component of the star formation process. In this paper, we present new Herschel PACS and SPIRE observations of the B59 and Stem regions in the Pipe Nebula complex, revealing a rich, organized network of filaments. The asymmetric column density profiles observed for several filaments, along with the bow-like edge of B59, indicates that the Pipe Nebula is being compressed from its western side, most likely by the winds from the nearby Sco OB2 association. We suggest that this compressive flow has contributed to the formation of some of the observed filamentary structures. In B59, the only region of the entire Pipe complex showing star formation activity, the same compressive flow has likely enhanced the initial column density of the clump, allowing it to become globally gravitationally unstable. Although more speculative, we propose that gravity has also been responsible for shaping the converging filamentary pattern observed in B59. While the question of the relative impact of large-scale compression and gravity remains open in B59, large-scale compression appears to be a plausible mechanism for the initial formation of filamentary structures in the rest of the complexComment: 9 pages, 9 figures, accepted for publication in A&

Sputtering of pure boron using a magnetron without a radio-frequency supply

Boron at room temperature is insulating and therefore conventionally sputtered using radio-frequency power supplies including their power-matching networks. In this contribution, we show that through a suitable ignition assistance, via temporary application of a high voltage (∼600 V) to the substrate holder or auxiliary electrode, the magnetron discharge can be ignited using a conventional mid-frequency power supply without matching network. Once the discharge is ignited, the assisting voltage can be reduced to less than 50 V, and after the boron target surface is at elevated temperature, thereby exhibiting sufficient conductivity, the assisting voltage can be turned off. The deposition of boron and boron nitride films has been demonstrated with a deposition rate of approximately 400 nm/h for a power of 250 W