Fluorescence energy transfer in quantum dot/azo dye complexes in polymer track membranes

Fluorescence resonance energy transfer in complexes of semiconductor CdSe/ZnS quantum dots with molecules of heterocyclic azo dyes, 1-(2-pyridylazo)-2-naphthol and 4-(2-pyridylazo) resorcinol, formed at high quantum dot concentration in the polymer pore track membranes were studied by steady-state and transient PL spectroscopy. The effect of interaction between the complexes and free quantum dots on the efficiency of the fluorescence energy transfer and quantum dot luminescence quenching was found and discussed

Carbon-based interlayers in perovskite solar cells

Perovskites are solution-processed, high-performance semiconductors of interest in low-cost photovoltaics. The interfaces between the perovskite photoactive layers and the top and bottom contacts are crucial for efficient charge transport and minimizing trapping. Control of the collection of charge carriers at these interfaces is decisive to device performance. Here, we review recent progress in the realization of efficient perovskite solar cells using cheap, easily processed, stable, carbon-based interlayers. Interface materials including graphene, carbon nanotubes, fullerenes, graphene quantum dots and carbon dots are introduced and their influence on device performance is discussed

Beyond Charge Transfer: The impact of auger recombination and FRET on PL quenching in an rGO-QDs system

PL intensity quenching and the PL lifetime reduction of fluorophores located close to gra‐ phene derivatives are generally explained by charge and energy transfer processes. Analyzing the PL from PbS QDs in rGO/QD systems, we observed a substantial reduction in average PL lifetimes with an increase in rGO content that cannot be interpreted solely by these two processes. To explain the PL lifetime dependence on the rGO/QD component ratio, we propose a model based on the Auger recombination of excitations involving excess holes left in the QDs after the charge transfer process. To validate the model, we conducted additional experiments involving the external engi‐ neering of free charge carriers, which confirmed the role of excess holes as the main QD PL quench‐ ing source. A mathematical simulation of the model demonstrated that the energy transfer between neighboring QDs must also be considered to explain the experimental data carefully. Together, Au‐ ger recombination and energy transfer simulation offers us an excellent fit for the average PL life‐ time dependence on the component ratio of the rGO/QD system

Electrophysical Characteristics of a Polymer Composite Based on Ultrahigh Molecular Weight Polyethylene with CuO Nanoparticles

Методом импедансной спектроскопии исследованы электрофизические свойства композитного материала на основе сверхвысокомолекулярного полиэтилена с ограниченной массовой концентрацией 0,5 мас.% оксида меди CuO в диапазоне частот от 102 до 108 Гц. Предполагается, что введение в состав полимера малых концентраций наночастиц способствует более равномерному их осаждению на поверхностях полимерных гранул. Это позволяет в процессе тестирования таких образцов выявить наиболее вероятные механизмы их поляризации и протекания электрического тока в относительно однородном ансамбле наночастиц в полимерной матрице. Установлено, что внедряемые в полимерную матрицу наночастицы незначительно влияют на процессы электрической поляризации, но приводят к появлению частотно-зависимой проводимости в широком диапазоне частот. Этот процесс сопровождается существенным возрастанием диэлектрических потерь. Электрофизические характеристики полученных композитов обсуждаются с учётом переноса электрических зарядов (ионов или электронов) как по внутренней, так и по поверхностной структуре наночастиц CuOThe electrophysical properties of a composite material based on ultrahigh molecular weight polyethylene with a limited mass concentration of 0.5 wt% copper oxide CuO in the frequency range from 102 to 108 Hz were studied by impedance spectroscopy. It is assumed that the introduction of low concentrations of nanoparticles into the polymer composition contributes to their more uniform deposition on the surfaces of polymer granules. This makes it possible to reveal the most probable mechanisms of their polarization and the flow of electric current in a relatively homogeneous ensemble of nanoparticles in a polymer matrix during testing of such samples. It has been established that nanoparticles introduced into the polymer matrix have little effect on the processes of electric polarization, but lead to the appearance of frequency-dependent conductivity in a wide frequency range. This process is accompanied by a significant increase in dielectric losses. The electrophysical characteristics of the resulting composites are discussed taking into account the transfer of electric charges (ions or electrons) both along the internal and surface structures of CuO nanoparticle

CMS physics technical design report : Addendum on high density QCD with heavy ions

Peer reviewe

Modelling human choices: MADeM and decision‑making

Research supported by FAPESP 2015/50122-0 and DFG-GRTK 1740/2. RP and AR are also part of the Research, Innovation and Dissemination Center for Neuromathematics FAPESP grant (2013/07699-0). RP is supported by a FAPESP scholarship (2013/25667-8). ACR is partially supported by a CNPq fellowship (grant 306251/2014-0)

Radiative decay rates of impurity states in semiconductor nanocrystals

Doped semiconductor nanocrystals is a versatile material base for contemporary photonics and optoelectronics devices. Here, for the first time to the best of our knowledge, we theoretically calculate the radiative decay rates of the lowest-energy states of donor impurity in spherical nanocrystals made of four widely used semiconductors: ZnS, CdSe, Ge, and GaAs. The decay rates were shown to vary significantly with the nanocrystal radius, increasing by almost three orders of magnitude when the radius is reduced from 15 to 5 nm. Our results suggest that spontaneous emission may dominate the decay of impurity states at low temperatures, and should be taken into account in the design of advanced materials and devices based on doped semiconductor nanocrystals

Applications of Carbon Dots in Optoelectronics

Carbon dots (CDs) are an attractive class of nanomaterials due to the ease of their synthesis, biocompatibility, and superior optical properties. The electronic structure of CDs and hence their optical transitions can be controlled and tuned over a wide spectral range via the choice of precursors, adjustment of the synthetic conditions, and post-synthetic treatment. We summarize recent progress in the synthesis of CDs emitting in different colors in terms of morphology and optical properties of the resulting nanoparticles, with a focus on the synthetic approaches allowing to shift their emission to longer wavelengths. We further consider formation of CD-based composite materials, and review approaches used to prevent aggregation and self-quenching of their emission. We then provide examples of applications of CDs in optoelectronic devices, such as solar cells and light-emitting diodes (LEDs) with a focus on white LEDs