245 research outputs found
Flame-coating of titania particles with silica
Silica/titania composite particles were prepared by co-oxidation of titanium-tetra-isopropoxide and hexamethyldisiloxane in a co-flow diffusion flame reactor. The influence of precursor composition on product powder characteristics was studied by x-ray diffraction, nitrogen adsorption, electron microscopy, elemental mapping, and energy-dispersive x-ray analysis. The flame temperature was measured by Fourier transform infrared spectroscopy. The evolution of composite particle morphology from ramified agglomerates to spot- or fully coated particles was investigated by thermophoretic sampling and transmission/scanning electron microscopy. At 40-60 wt% TiO2, particles with segregated regions of silica and titania were formed, while at 80 wt% TiO2 rough silica coatings were obtained. Rapid flame-quenching with a critical flow nozzle at 5 cm above the burner nearly halved the product particle size, changed its crystallinity from pure anatase to mostly rutile and resulted in smooth silica coatings on particles containing 80 wt% TiO
Distinguishing between aggregates and agglomerates of flame-made TiO2 by high-pressure dispersion
On negative higher-order Kerr effect and filamentation
As a contribution to the ongoing controversy about the role of higher-order
Kerr effect (HOKE) in laser filamentation, we first provide thorough details
about the protocol that has been employed to infer the HOKE indices from the
experiment. Next, we discuss potential sources of artifact in the experimental
measurements of these terms and show that neither the value of the observed
birefringence, nor its inversion, nor the intensity at which it is observed,
appear to be flawed. Furthermore, we argue that, independently on our values,
the principle of including HOKE is straightforward. Due to the different
temporal and spectral dynamics, the respective efficiency of defocusing by the
plasma and by the HOKE is expected to depend substantially on both incident
wavelength and pulse duration. The discussion should therefore focus on
defining the conditions where each filamentation regime dominates.Comment: 22 pages, 11 figures. Submitted to Laser physics as proceedings of
the Laser Physics 2010 conferenc
Trianon and its aftermath: British geography and the âdismembermentâ of Hungary, c.1915- c.1922
Design and Implementation of an Underwater Sound Recording Device
To monitor the underwater sound and pressure waves generated by anthropogenic activities such as underwater blasting and pile driving, an autonomous system was designed to record underwater acoustic signals. The underwater sound recording device (USR) allows for connections of two hydrophones or other dynamic pressure sensors, filters high frequency noise out of the collected signals, has a gain that can be independently set for each sensor, and allows for 2 h of data collection. Two versions of the USR were created: a submersible model deployable to a maximum depth of 300 m, and a watertight but not fully submersible model. Tests were performed on the USR in the laboratory using a data acquisition system to send single-frequency sinusoidal voltages directly to each component. These tests verified that the device operates as designed and performs as well as larger commercially available data acquisition systems, which are not suited for field use. On average, the designed gain values differed from the actual measured gain values by about 0.35 dB. A prototype of the device was used in a case study to measure blast pressures while investigating the effect of underwater rock blasting on juvenile Chinook salmon and rainbow trout. In the case study, maximum positive pressure from the blast was found to be significantly correlated with frequency of injury for individual fish. The case study also demonstrated that the device withstood operation in harsh environments, making it a valuable tool for collecting field measurements
Distinguishing between aggregates and agglomerates of flame-made TiO2 by high-pressure dispersion
Increased Mobility of Metal Oxide Nanoparticles Due to Photo and Thermal Induced Disagglomeration
Significant advances have been made on our understanding of the fate and transport of engineered nanomaterials. One unexplored aspect of nanoparticle aggregation is how environmental stimuli such as light exposure and temperature variations affect the mobility of engineered nanoparticles. In this study, TiO2, ZnO, and CeO2 were chosen as model materials for investigating the mobility of nanoparticles under three external stimuli: heat, light and sonication. Sunlight and high power sonication were able to partially disagglomerate metal oxide clusters, but primary particles bonded by solid state necks were left intact. A cycle of temperature increase from 25°C to 65°C and then decrease back was found to disagglomerate the compact clusters in the heating phase and reagglomerate them as more open fractal structures during the cooling phase. A fractal model summing the pair-wise DLVO interactions between primary particles within two fractal agglomerates predicts weak attractions on the order of a few kT. Our study shows that common environmental stimuli such as light exposure or temperature variation can disagglomerate nanoparticle clusters and enhance their mobility in open waters. This phenomenon warrants attention since it is likely that metal oxide nanoparticles will experience these natural stimuli during their transport in the environment
Correlations of differentially expressed gap junction connexins cx26, cx30, cx32, cx43 and cx46 with breast cancer progression and prognosis.
BACKGROUND AND AIMS: Connexins and their cell membrane channels contribute to the control of cell proliferation and compartmental functions in breast glands and their deregulation is linked to breast carcinogenesis. Our aim was to correlate connexin expression with tumor progression and prognosis in primary breast cancers. MATERIALS AND METHODS: Meta-analysis of connexin isotype expression data of 1809 and 1899 breast cancers from the Affymetrix and Illumina array platforms, respectively, was performed. Expressed connexins were also monitored at the protein level in tissue microarrays of 127 patients equally representing all tumor grades, using immunofluorescence and multilayer, multichannel digital microscopy. Prognostic correlations were plotted in Kaplan-Meier curves and tested using the log-rank test and cox-regression analysis in univariate and multivariate models. RESULTS: The expression of GJA1/Cx43, GJA3/Cx46 and GJB2/Cx26 and, for the first time, GJA6/Cx30 and GJB1/Cx32 was revealed both in normal human mammary glands and breast carcinomas. Within their subfamilies these connexins can form homo- and heterocellular epithelial channels. In cancer, the array datasets cross-validated each other's prognostic results. In line with the significant correlations found at mRNA level, elevated Cx43 protein levels were linked with significantly improved breast cancer outcome, offering Cx43 protein detection as an independent prognostic marker stronger than vascular invasion or necrosis. As a contrary, elevated Cx30 mRNA and protein levels were associated with a reduced disease outcome offering Cx30 protein detection as an independent prognostic marker outperforming mitotic index and necrosis. Elevated versus low Cx43 protein levels allowed the stratification of grade 2 tumors into good and poor relapse free survival subgroups, respectively. Also, elevated versus low Cx30 levels stratified grade 3 patients into poor and good overall survival subgroups, respectively. CONCLUSION: Differential expression of Cx43 and Cx30 may serve as potential positive and negative prognostic markers, respectively, for a clinically relevant stratification of breast cancers
Forest microclimate dynamics drive plant responses to warming
Climate warming is causing a shift in biological communities in favor of warm-affinity species (i.e., thermophilization). Species responses often lag behind climate warming, but the reasons for such lags remain largely unknown. Here, we analyzed multidecadal understory microclimate dynamics in European forests and show that thermophilization and the climatic lag in forest plant communities are primarily controlled by microclimate. Increasing tree canopy cover reduces warming rates inside forests, but loss of canopy cover leads to increased local heat that exacerbates the disequilibrium between community responses and climate change. Reciprocal effects between plants and microclimates are key to understanding the response of forest biodiversity and functioning to climate and land-use changes
- âŠ