On the Production Testing of Memristor Ratioed Logic (MRL) Gates

Abstract This paper focuses on the production testing of Memristor Ratioed Logic (MRL) gates. MRL is a family that uses memristors along with CMOS inverters to design logic gates. Two-input NAND and NOR gates are investigated using the stuck at fault model for the memristors and the five-fault model for the transistors. Test escapes may take place while testing faults in the memristors. Therefore, two solutions are proposed to obtain full coverage for the MRL NAND and NOR gates. The first is to apply scaled input voltages and the second is to change the switching threshold of the CMOS inverter. In addition, it is shown that test speed and order should be taken into consideration. It is proven that three ordered test vectors are needed for full coverage in MRL NAND and NOR gates, which is different from the order required to obtain 100% coverage in the conventional NAND and NOR CMOS designs

On the production testing of analog and digital circuits

This thesis focuses on the production testing of Analog and Digital circuits. First, it addresses the issue of finding a high coverage minimum test set for the second generation current conveyor as this was not tackled before. The circuit under test is used in active capacitance multipliers, V-I scalar circuits, Biquadratic filters and many other applications. This circuit is often used to implement voltage followers, current followers and voltage to current converters. Five faults are assumed per transistor. It is shown that, to obtain 100% fault coverage, the CCII has to be operated in voltage to current converter mode. Only two test values are required to obtain this fault coverage. Additionally, the thesis focuses on the production testing of Memristor Ratioed Logic (MRL) gates because this was not studied before. MRL is a family that uses memristors along with CMOS inverters to design logic gates. Two-input NAND and NOR gates are investigated using the stuck at fault model for the memristors and the five-fault model for the transistors. It is shown that in order to obtain full coverage for the MRL NAND and NOR gates, two solutions are proposed. The first is the usage of scaled input voltages to prevent the output from falling in the undefined region. The second proposed solution is changing the switching threshold VM of the CMOS inverter. In addition, it is shown that test speed and order should be taken into consideration. It is proven that three ordered test vectors are needed for full coverage in MRL NAND and NOR gates, which is different from the 100% coverage test set in the conventional NAND and NOR CMOS designs

Hybrid memristor-CMOS implementation of logic gates design using LTSpice

In this paper, a hybrid memristor-CMOS implementation of logic gates simulated using LTSpice. Memristors' implementation in computer architecture designs explored in various design structures proposed by researchers from all around the world. However, all prior designs have some drawbacks in terms of applicability, scalability, and performance. In this research, logic gates design based on the hybrid memristor-CMOS structure presented. 2-inputs AND, OR, NAND, NOR, XOR, and XNOR are demonstrated with minimum components requirements. In addition, a 1-bit full adder circuit with high performance and low area consumption is also proposed. The proposed full adder only consists of 4 memristors and 7 CMOS transistors. Half design of the adder base on the memristor component created. Through analysis and simulations, the memristor implementation on designing logic gates using memristor-CMOS structure demonstrated using the generalized metastable switch memristor (MSS) model and LTSpice. In conclusion, the proposed approach improves speed and require less area

Non-volatile FPGA architecture using resistive switching devices

This dissertation reports the research work that was conducted to propose a non-volatile architecture for FPGA using resistive switching devices. This is achieved by designing a Configurable Memristive Logic Block (CMLB). The CMLB comprises of memristive logic cells (MLC) interconnected to each other using memristive switch matrices. In the MLC, novel memristive D flip-flop (MDFF), 6-bit non-volatile look-up table (NVLUT), and CMOS-based multiplexers are used. Other than the MDFF, a non-volatile D-latch (NVDL) was also designed. The MDFF and the NVDL are proposed to replace CMOS-based D flip-flops and D-latches to improve energy consumption. The CMLB shows a reduction of 8.6% of device area and 1.094 times lesser critical path delay against the SRAM-based FPGA architecture. Against similar CMOS-based circuits, the MDFF provides switching speed of 1.08 times faster; the NVLUT reduces power consumption by 6.25nW and improves device area by 128 transistors; while the memristive logic cells reduce overall device area by 60.416μm2. The NVLUT is constructed using novel 2TG1M memory cells, which has the fastest switching times of 12.14ns, compared to other similar memristive memory cells. This is due to the usage of transmission gates which improves voltage transfer from input to the memristor. The novel 2TG1M memory cell also has lower energy consumption than the CMOS-based 6T SRAM cell. The memristive-based switch matrices that interconnects the MLCs together comprises of novel 7T1M SRAM cells, which has the lowest energy-delay-area-product value of 1.61 among other memristive SRAM cells. Two memristive logic gates (MLG) were also designed (OR and AND), that introduces non-volatility into conventional logic gates. All the above circuits and design simulations were performed on an enhanced SPICE memristor model, which was improved from a previously published memristor model. The previously published memristor model was fault to not be in good agreement with memristor theory and the physical model of memristors. Therefore, the enhanced SPICE memristor model provides a memristor model which is in good agreement with the memristor theory and the physical model of memristors, which is used throughout this research work

Non-volatile FPGA architecture using resistive switching devices

This dissertation reports the research work that was conducted to propose a non-volatile architecture for FPGA using resistive switching devices. This is achieved by designing a Configurable Memristive Logic Block (CMLB). The CMLB comprises of memristive logic cells (MLC) interconnected to each other using memristive switch matrices. In the MLC, novel memristive D flip-flop (MDFF), 6-bit non-volatile look-up table (NVLUT), and CMOS-based multiplexers are used. Other than the MDFF, a non-volatile D-latch (NVDL) was also designed. The MDFF and the NVDL are proposed to replace CMOS-based D flip-flops and D-latches to improve energy consumption. The CMLB shows a reduction of 8.6% of device area and 1.094 times lesser critical path delay against the SRAM-based FPGA architecture. Against similar CMOS-based circuits, the MDFF provides switching speed of 1.08 times faster; the NVLUT reduces power consumption by 6.25nW and improves device area by 128 transistors; while the memristive logic cells reduce overall device area by 60.416μm2. The NVLUT is constructed using novel 2TG1M memory cells, which has the fastest switching times of 12.14ns, compared to other similar memristive memory cells. This is due to the usage of transmission gates which improves voltage transfer from input to the memristor. The novel 2TG1M memory cell also has lower energy consumption than the CMOS-based 6T SRAM cell. The memristive-based switch matrices that interconnects the MLCs together comprises of novel 7T1M SRAM cells, which has the lowest energy-delay-area-product value of 1.61 among other memristive SRAM cells. Two memristive logic gates (MLG) were also designed (OR and AND), that introduces non-volatility into conventional logic gates. All the above circuits and design simulations were performed on an enhanced SPICE memristor model, which was improved from a previously published memristor model. The previously published memristor model was fault to not be in good agreement with memristor theory and the physical model of memristors. Therefore, the enhanced SPICE memristor model provides a memristor model which is in good agreement with the memristor theory and the physical model of memristors, which is used throughout this research work

Computers from plants we never made. Speculations

We discuss possible designs and prototypes of computing systems that could be based on morphological development of roots, interaction of roots, and analog electrical computation with plants, and plant-derived electronic components. In morphological plant processors data are represented by initial configuration of roots and configurations of sources of attractants and repellents; results of computation are represented by topology of the roots' network. Computation is implemented by the roots following gradients of attractants and repellents, as well as interacting with each other. Problems solvable by plant roots, in principle, include shortest-path, minimum spanning tree, Voronoi diagram, $\alpha$-shapes, convex subdivision of concave polygons. Electrical properties of plants can be modified by loading the plants with functional nanoparticles or coating parts of plants of conductive polymers. Thus, we are in position to make living variable resistors, capacitors, operational amplifiers, multipliers, potentiometers and fixed-function generators. The electrically modified plants can implement summation, integration with respect to time, inversion, multiplication, exponentiation, logarithm, division. Mathematical and engineering problems to be solved can be represented in plant root networks of resistive or reaction elements. Developments in plant-based computing architectures will trigger emergence of a unique community of biologists, electronic engineering and computer scientists working together to produce living electronic devices which future green computers will be made of.Comment: The chapter will be published in "Inspired by Nature. Computing inspired by physics, chemistry and biology. Essays presented to Julian Miller on the occasion of his 60th birthday", Editors: Susan Stepney and Andrew Adamatzky (Springer, 2017

Leveraging RRAM to Design Efficient Digital Circuits and Systems for Beyond Von Neumann in-Memory Computing

Due to the physical separation of their processing elements and storage units, contemporary digital computers are confronted with the thorny memory-wall problem. The strategy of in-memory computing has been considered as a promising solution to overcome the von Neumann bottleneck and design high-performance, energy-efficient computing systems. Moreover, in the post Moore era, post-CMOS technologies have received intense interests for possible future digital logic applications beyond the CMOS scaling limits. Motivated by these perspectives from system level to device level, this thesis proposes two effective processing-in-memory schemes to construct the non-von Neumann systems based on nonvolatile resistive random-access memory (RRAM). In the first scheme, we present functionally complete stateful logic gates based on a CMOS-compatible 2-transistor-2-RRAM (2T2R) structure. In this structure, the programmable logic functionality is determined by the amplitude of operation voltages, rather than its circuit topology. A reconfigurable 3T2R chain with programmable interconnects is used to implement complex combinational logic circuits. The design has a highly regular and symmetric circuit structure, making it easy for design, integration, and fabrication, while the operations are flexible yet clean. Easily integrated as 3-dimensional (3-D) stacked arrays, two proposed memory architectures not only serve as regular 3-D memory arrays but also perform in-memory-computing within the same layer and between the stacked layers. The second scheme leverages hybrid logic in the same hardware to design efficient digital circuits and systems with low computational complexity. Multiple-bit ripple-carry adder (RCA), pipelined RCA, and prefix tree adder are shown as example circuits, using the same regular chain structure, to validate the design efficiency. The design principles, computational complexity, and performance are discussed and compared to the CMOS technology and other state-of-the-art post-CMOS implementations. The overall evaluation shows superior performance in speed and area. The result of the study could build a technology cell library that can be potentially used as input to a technology-mapping algorithm. The proposed hybrid-logic methodology presents prospect of hardware acceleration and future beyond-von Neumann in-memory computing architectures

Towards Oxide Electronics:a Roadmap

At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore's law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics