The Modeling of above Ground Biomass in Ranges of Corbett Tiger Reserve using Dual-Polarization ALOS PALSAR Data

The study has been carried out in the Pauri Garhwal district of Uttarakhand keeping the focus on Corbett Tiger Reserve (CTR). The total area of CTR covered in the scene is 889 sq. km. The main aim of the paper is to develop a model by establishing a relationship between backscatter coefficients generated from dual polarization L-band ALOS PALSAR data acquired in July 2008 and the field inventory data collected by Forest Survey of India team in 2010. A total of 120 sample plots data were collected in the area out of which 60 plots were used for the training of the model and the remaining 60 plots were left for the validation of the most significant model. The Simple regression analysis was computed between HH & HV backscatter as independent variable and per plot biomass as dependent variable. The Linear, Logarithmic and Polynomial best fit regression models were analyzed. It was found that the coefficient of determination is more with HV backscatter (R2=0.75) using logarithmic model as compared among HV in linear and polynomial on one hand and HH in linear, logarithmic and polynomial on the other hand. To improve the accuracy and to know the combined effects of both the polarizations, multiple linear regression analysis (MLR) was applied. There was a significant improvement in correlation coefficients (R2=0.86).The in-situ field inventory data shows that the biomass in the CTR ranges from 9.6 t/ha to 322.6 t/ha. The simple regression modelled biomass ranges from 26.2 t/ha to 401.43 t/ha, whereas the MLR modelled biomass ranges from 10.96 t/ha to 312.64 t/ha. The majority of the area was found to be in the range of 100 t/ha to 150 t/ha biomass. The coefficient of determination (R2) between observed and predicted biomass was found to be 0.734 with simple regression, whereas it was found to be 0.83 with MLR.Key words: biomass, modeling and remote sensin

Classical biomass estimation methods and new approaches

Bu çalışmada, biyolojik enerji kaynaklarının temelini oluşturan ormanlardaki biyokütle miktarının belirlenmesinde kullanılan klasik yöntemler ile son yıllarda üzerinde birçok sayıda araştırma yapılan uzaktan algılama yöntemleri tanıtılmış ve bu yöntemlerin birbirlerine olan üstünlükleri tartışılmıştır. Özellikle orman alanlarındaki toplam biyokütle miktarının belirlenmesinde uzaktan algılama teknikleri ile yapılacak tahminlerin diğer yöntemlere göre daha pratik olduğu belirtilmiştir. Buna karşın tek ağaçlara ilişkin biyokütle tahmininde ise güvenirlik düzeyi diğer yöntemlerden daha düşüktür.In this study, classical methods used to estimate biomass of forest stands the base of biological energy resources, and remote sensing methods on which many study have been done recently were explained. Furthermore, these methods were compared. It was determined that remote sensing methods are more practical than the others. Although remote sensing methods are very useful to estimate total biomass of forest, the other methods are more useful and reliable to estimate individual tree biomass

Structural variables estimation in pine plantacion using CosmoSkyMed polarimetric ratios

Los datos satelitales son de gran utilidad en aplicaciones forestales. La cobertura nubosa afecta la adquisición de imágenes ópticas, pero no a los radares. Aunque la banda X no posee un gran poder de penetración en la vegetación, ameritan su evaluación. En este trabajo se evalúa la relación entre la retrodispersión medidas en imágenes CosmoSkyMed y variables estructurales en plantaciones de Pinus taeda L. en Misiones mediante modelos de regresión múltiple. El área basal fue la variable estructural donde se observó mejor ajuste del modelo (r2=0,82) seguida por el diámetro cuadrático medio (r2=0,59). No se halló un ajuste significativo utilizando la densidad del rodal. Los modelos ajustados son de carácter exploratorio dado las escasas observaciones de campo pero indican buenas posibilidades para predecir el área basal. El agregado de la edad como variable predictora podría mejorar el ajuste de los modelos pero con los datos disponibles no se justifica incluirlos.Optical and radar satellite data are very useful in forest application. Cloud cover affects the acquisition of optical data, but not affects the radar. Despite X-band do not enable deep penetration into vegetation, it deserves the evaluation. In this work, the relationship between the backscatter of CosmoSkyMed data and structural variables in Pinus taeda L. plantations, in Misiones, were evaluated by multiple regression models. Basal area exhibit-ed the best fit for models (r2=0,82) followed by quadratic mean diameter (r2=0,59). No significant fit was found for stand density. Due to scarce field observations the models must be taken as exploratory but seems to be suitable for basal area estimation. The introduction of the stand age as a predictor could increase the models fit but with the small ana-lyzed data set it does not seem to be necessary to include it.Laboratorio de Investigación de Sistemas Ecológicos y Ambientale

Large area forest stem volume mapping using synergy of spaceborne interferometric radar and optical remote sensing: a case study of northeast chin

More than a decade of investigations on the use of the interferometric ERS-1/2 tandem coherence for forest applications have increased the understanding of the behaviour of C-band repeat-pass coherence over forested terrain. It has been shown that under optimal imaging conditions, ERS-1/2 tandem coherence can be used for stem volume retrieval with accuracies in the range of ground surveys. Large-area applications of ERS-1/2 tandem coherence are rare though. One of the main limitations concerning large-area exploitation of the existing ERS-1/2 tandem archives for forest stem volume retrieval is related to the considerable dependence of repeat-pass coherence upon the meteorological (rain, temperature, wind speed) and environmental (soil moisture variations, snow metamorphism) acquisition conditions. Conventional retrieval algorithms require accurate forest inventory data for a dense grid of forest sites to tune models that relate coherence to stem volume to the local conditions. Accurate forest inventory data is, however, a rare commodity that is often not freely available. In this thesis, a fully automated algorithm was developed, based on a synergetic use of the MODIS Vegetation Continuous Field product (Hansen et al., 2002), that allowed the training of the Interferometric Water Cloud Model IWCM (Askne et al., 1997) without further need for forest inventory data. With the new algorithm it was possible to train the IWCM on a frame-by-frame basis and thus to account for the spatial and temporal variability of the meteorological and environmental acquisition conditions. The new algorithm was applied to a multi-seasonal ERS-1/2 tandem dataset covering Northeast China that was acquired between 1995 and 1998 with baselines up to 400 m

Comparing synthetic aperture radar and LiDAR for above-ground biomass estimation in Glen Affric, Scotland

Quantifying above-ground biomass (AGB) and carbon sequestration has been a significant focus of attention within the UNFCCC and Kyoto Protocol for improvement of national carbon accounting systems (IPCC, 2007; UNFCCC, 2011). A multitude of research has been carried out in relatively flat and homogeneous forests (Ranson & Sun, 1994; Beaudoin et al.,1994; Kurvonen et al., 1999; Austin et al., 2003; Dimitris et al., 2005), yet forests in the highlands, which generally form heterogeneous forest cover and sparse woodlands with mountainous terrain have been largely neglected in AGB studies (Cloude et al., 2001; 2008; Lumsdon et al., 2005; 2008; Erxue et al., 2009, Tan et al., 2010; 2011a; 2011b; 2011c; 2011d). Since mountain forests constitute approximately 28% of the total global forest area (Price and Butt, 2000), a better understanding of the slope effects is of primary importance in AGB estimation. The main objective of this research is to estimate AGB in the aforementioned forest in Glen Affric, Scotland using both SAR and LiDAR data. Two types of Synthetic Aperture Radar (SAR) data were used in this research: TerraSAR-X, operating at X-band and ALOS PALSAR, operating at L-band, both are fully polarimetric. The former data was acquired on 13 April 2010 and of the latter, two scenes were acquired on 17 April 2007 and 08 June 2009. Airborne LiDAR data were acquired on 09 June 2007. Two field measurement campaigns were carried out, one of which was done from winter 2006 to spring 2007 where physical parameters of trees in 170 circular plots were measured by the Forestry Commission team. Another intensive fieldwork was organised by myself with the help of my fellow colleagues and it comprised of tree measurement in two transects of 200m x 50m at a relatively flat and dense plantation forest and 400m x 50m at hilly and sparse semi-natural forest. AGB is estimated for both the transects to investigate the effectiveness of the proposed method at plot-level. This thesis evaluates the capability of polarimetric Synthetic Aperture Radar data for AGB estimation by investigating the relationship between the SAR backscattering coefficient and AGB and also the relationship between the decomposed scattering mechanisms and AGB. Due to the terrain and heterogeneous nature of the forests, the result from the backscatter-AGB analysis show that these forests present a challenge for simple AGB estimation. As an alternative, polarimetric techniques were applied to the problem by decomposing the backscattering information into scattering mechanisms based on the approach by Yamaguchi (2005; 2006), which are then regressed to the field measured AGB. Of the two data sets, ALOS PALSAR demonstrates a better estimation capacity for AGB estimation than TerraSAR-X. The AGB estimated results from SAR data are compared with AGB derived from LiDAR data. Since tree height is often correlated with AGB (Onge et al., 2008; Gang et al., 2010), the effectiveness of the tree height retrieval from LiDAR is evaluated as an indicator of AGB. Tree delineation was performed before AGB of individual trees were calculated allometrically. Results were validated by comparison to the fieldwork data. The amount of overestimation varies across the different canopy conditions. These results give some indication of when to use LiDAR or SAR to retrieve forest AGB. LiDAR is able to estimate AGB with good accuracy and the R2 value obtained is 0.97 with RMSE of 14.81 ton/ha. The R2 and RMSE obtained for TerraSAR-X are 0.41 and 28.5 ton/ha, respectively while for ALOS PALSAR data are 0.70 and 23.6 ton/ha, respectively. While airborne LiDAR data with very accurate height measurement and consequent three-dimensional (3D) stand profiles which allows investigation into the relationship between height, number density and AGB, it's limited to small coverage area, or large areas but at large cost. ALOS PALSAR, on the other hand, can cover big coverage area but it provide a lower resolution, hence, lower estimation accuracy

Spaceborne synthetic aperture radar: Current status and future directions. A report to the Committee on Earth Sciences, Space Studies Board, National Research Council

This report provides a context in which questions put forth by NASA's Office of Mission to Planet Earth (OMPTE) regarding the next steps in spaceborne synthetic aperture radar (SAR) science and technology can be addressed. It summarizes the state-of-the-art in theory, experimental design, technology, data analysis, and utilization of SAR data for studies of the Earth, and describes potential new applications. The report is divided into five science chapters and a technology assessment. The chapters summarize the value of existing SAR data and currently planned SAR systems, and identify gaps in observational capabilities needing to be filled to address the scientific questions. Cases where SAR provides complementary data to other (non-SAR) measurement techniques are also described. The chapter on technology assessment outlines SAR technology development which is critical not only to NASA's providing societally relevant geophysical parameters but to maintaining competitiveness in SAR technology, and promoting economic development

Biomass Representation in Synthetic Aperture Radar Interferometry Data Sets

This work makes an attempt to explain the origin, features and potential applications of the elevation bias of the synthetic aperture radar interferometry (InSAR) datasets over areas covered by vegetation. The rapid development of radar-based remote sensing methods, such as synthetic aperture radar (SAR) and InSAR, has provided an alternative to the photogrammetry and LiDAR for determining the third dimension of topographic surfaces. The InSAR method has proved to be so effective and productive that it allowed, within eleven days of the space shuttle mission, for acquisition of data to develop a three-dimensional model of almost the entire land surface of our planet. This mission is known as the Shuttle Radar Topography Mission (SRTM). Scientists across the geosciences were able to access the great benefits of uniformity, high resolution and the most precise digital elevation model (DEM) of the Earth like never before for their a wide variety of scientific and practical inquiries. Unfortunately, InSAR elevations misrepresent the surface of the Earth in places where there is substantial vegetation cover. This is a systematic error of unknown, yet limited (by the vertical extension of vegetation) magnitude. Up to now, only a limited number of attempts to model this error source have been made. However, none offer a robust remedy, but rather partial or case-based solutions. More work in this area of research is needed as the number of airborne and space-based InSAR elevation models has been steadily increasing over the last few years, despite strong competition from LiDAR and optical methods. From another perspective, however, this elevation bias, termed here as the “biomass impenetrability”, creates a great opportunity to learn about the biomass. This may be achieved due to the fact that the impenetrability can be considered a collective response to a few factors originating in 3D space that encompass the outermost boundaries of vegetation. The biomass, presence in InSAR datasets or simply the biomass impenetrability, is the focus of this research. The report, presented in a sequence of sections, gradually introduces terminology, physical and mathematical fundamentals commonly used in describing the propagation of electromagnetic waves, including the Maxwell equations. The synthetic aperture radar (SAR) and InSAR as active remote sensing methods are summarised. In subsequent steps, the major InSAR data sources and data acquisition systems, past and present, are outlined. Various examples of the InSAR datasets, including the SRTM C- and X-band elevation products and INTERMAP Inc. IFSAR digital terrain/surface models (DTM/DSM), representing diverse test sites in the world are used to demonstrate the presence and/or magnitude of the biomass impenetrability in the context of different types of vegetation – usually forest. Also, results of investigations carried out by selected researchers on the elevation bias in InSAR datasets and their attempts at mathematical modelling are reviewed. In recent years, a few researchers have suggested that the magnitude of the biomass impenetrability is linked to gaps in the vegetation cover. Based on these hints, a mathematical model of the tree and the forest has been developed. Three types of gaps were identified; gaps in the landscape-scale forest areas (Type 1), e.g. forest fire scares and logging areas; a gap between three trees forming a triangle (Type 2), e.g. depending on the shape of tree crowns; and gaps within a tree itself (Type 3). Experiments have demonstrated that Type 1 gaps follow the power-law density distribution function. One of the most useful features of the power-law distributed phenomena is their scale-independent property. This property was also used to model Type 3 gaps (within the tree crown) by assuming that these gaps follow the same distribution as the Type 1 gaps. A hypothesis was formulated regarding the penetration depth of the radar waves within the canopy. It claims that the depth of penetration is simply related to the quantisation level of the radar backscattered signal. A higher level of bits per pixels allows for capturing weaker signals arriving from the lower levels of the tree crown. Assuming certain generic and simplified shapes of tree crowns including cone, paraboloid, sphere and spherical cap, it was possible to model analytically Type 2 gaps. The Monte Carlo simulation method was used to investigate relationships between the impenetrability and various configurations of a modelled forest. One of the most important findings is that impenetrability is largely explainable by the gaps between trees. A much less important role is played by the penetrability into the crown cover. Another important finding is that the impenetrability strongly correlates with the vegetation density. Using this feature, a method for vegetation density mapping called the mean maximum impenetrability (MMI) method is proposed. Unlike the traditional methods of forest inventories, the MMI method allows for a much more realistic inventory of vegetation cover, because it is able to capture an in situ or current situation on the ground, but not for areas that are nominally classified as a “forest-to-be”. The MMI method also allows for the mapping of landscape variation in the forest or vegetation density, which is a novel and exciting feature of the new 3D remote sensing (3DRS) technique. Besides the inventory-type applications, the MMI method can be used as a forest change detection method. For maximum effectiveness of the MMI method, an object-based change detection approach is preferred. A minimum requirement for the MMI method is a time-lapsed reference dataset in the form, for example, of an existing forest map of the area of interest, or a vegetation density map prepared using InSAR datasets. Preliminary tests aimed at finding a degree of correlation between the impenetrability and other types of passive and active remote sensing data sources, including TerraSAR-X, NDVI and PALSAR, proved that the method most sensitive to vegetation density was the Japanese PALSAR - L-band SAR system. Unfortunately, PALSAR backscattered signals become very noisy for impenetrability below 15 m. This means that PALSAR has severe limitations for low loadings of the biomass per unit area. The proposed applications of the InSAR data will remain indispensable wherever cloud cover obscures the sky in a persistent manner, which makes suitable optical data acquisition extremely time-consuming or nearly impossible. A limitation of the MMI method is due to the fact that the impenetrability is calculated using a reference DTM, which must be available beforehand. In many countries around the world, appropriate quality DTMs are still unavailable. A possible solution to this obstacle is to use a DEM that was derived using P-band InSAR elevations or LiDAR. It must be noted, however, that in many cases, two InSAR datasets separated by time of the same area are sufficient for forest change detection or similar applications

Spatio-temporal and structural analysis of vegetation dynamics of Lowveld Savanna in South Africa

Savanna vegetation structure parameters are important for assessing the biomes status under various disturbance scenarios. Despite free availability remote sensing data, the use of optical remote sensing data for savanna vegetation structure mapping is limited by sparse and heterogeneous distribution of vegetation canopy. Cloud and aerosol contamination lead to inconsistency in the availability of time series data necessary for continuous vegetation monitoring, especially in the tropics. Long- and medium wavelength microwave data such as synthetic aperture radar (SAR), with their low sensitivity to clouds and atmospheric aerosols, and high temporal and spatial resolution solves these problems. Studies utilising remote sensing data for vegetation monitoring on the other hand, lack quality reference data. This study explores the potential of high-resolution TLS-derived vegetation structure variables as reference to multi-temporal SAR datasets in savanna vegetation monitoring. The overall objectives of this study are: (i) to evaluate the potential of high-resolution TLS-data in extraction of savanna vegetation structure variables; (ii) to estimate landscape-wide aboveground biomass (AGB) and assess changes over four years using multi-temporal L-band SAR within a Lowveld savanna in Kruger National Park; and (iii) to assess interactions between C-band SAR with various savanna vegetation structure variables. Field inventories and TLS campaign were carried out in the wet and dry seasons of 2015 respectively, and provided reference data upon which AGB, CC and cover classes were modelled. L-band SAR modelled AGB was used for change analysis over 4 years, while multitemporal C-band SAR data was used to assess backscatter response to seasonal changes in CC and AGB abundant classes and cover classes. From the AGB change analysis, on average 36 ha of the study area (91 ha) experienced a loss in AGB above 5 t/ha over 4 years. A high backscatter intensity is observed on high abundance AGB, CC classes and large trees as opposed to low CC and AGB abundance classes and small trees. There is high response to all structure variables, with C-band VV showing best polarization in savanna vegetation mapping. Moisture availability in the wet season increases backscatter response from both canopy and background classes

Retrieving Leaf Area Index (LAI) Using Remote Sensing: Theories, Methods and Sensors

The ability to accurately and rapidly acquire leaf area index (LAI) is an indispensable component of process-based ecological research facilitating the understanding of gas-vegetation exchange phenomenon at an array of spatial scales from the leaf to the landscape. However, LAI is difficult to directly acquire for large spatial extents due to its time consuming and work intensive nature. Such efforts have been significantly improved by the emergence of optical and active remote sensing techniques. This paper reviews the definitions and theories of LAI measurement with respect to direct and indirect methods. Then, the methodologies for LAI retrieval with regard to the characteristics of a range of remotely sensed datasets are discussed. Remote sensing indirect methods are subdivided into two categories of passive and active remote sensing, which are further categorized as terrestrial, aerial and satellite-born platforms. Due to a wide variety in spatial resolution of remotely sensed data and the requirements of ecological modeling, the scaling issue of LAI is discussed and special consideration is given to extrapolation of measurement to landscape and regional levels