Preliminary Validation of a Low-Cost Motion Analysis System Based on RGB Cameras to Support the Evaluation of Postural Risk Assessment

This paper introduces a low-cost and low computational marker-less motion capture system based on the acquisition of frame images through standard RGB cameras. It exploits the open-source deep learning model CMU, from the tf-pose-estimation project. Its numerical accuracy and its usefulness for ergonomic assessment are evaluated by a proper experiment, designed and performed to: (1) compare the data provided by it with those collected from a motion capture golden standard system; (2) compare the RULA scores obtained with data provided by it with those obtained with data provided by the Vicon Nexus system and those estimated through video analysis, by a team of three expert ergonomists. Tests have been conducted in standardized laboratory conditions and involved a total of six subjects. Results suggest that the proposed system can predict angles with good consistency and give evidence about the tool’s usefulness for ergonomist

A gaze-contingent framework for perceptually-enabled applications in healthcare

Patient safety and quality of care remain the focus of the smart operating room of the future. Some of the most influential factors with a detrimental effect are related to suboptimal communication among the staff, poor flow of information, staff workload and fatigue, ergonomics and sterility in the operating room. While technological developments constantly transform the operating room layout and the interaction between surgical staff and machinery, a vast array of opportunities arise for the design of systems and approaches, that can enhance patient safety and improve workflow and efficiency. The aim of this research is to develop a real-time gaze-contingent framework towards a "smart" operating suite, that will enhance operator's ergonomics by allowing perceptually-enabled, touchless and natural interaction with the environment. The main feature of the proposed framework is the ability to acquire and utilise the plethora of information provided by the human visual system to allow touchless interaction with medical devices in the operating room. In this thesis, a gaze-guided robotic scrub nurse, a gaze-controlled robotised flexible endoscope and a gaze-guided assistive robotic system are proposed. Firstly, the gaze-guided robotic scrub nurse is presented; surgical teams performed a simulated surgical task with the assistance of a robot scrub nurse, which complements the human scrub nurse in delivery of surgical instruments, following gaze selection by the surgeon. Then, the gaze-controlled robotised flexible endoscope is introduced; experienced endoscopists and novice users performed a simulated examination of the upper gastrointestinal tract using predominately their natural gaze. Finally, a gaze-guided assistive robotic system is presented, which aims to facilitate activities of daily living. The results of this work provide valuable insights into the feasibility of integrating the developed gaze-contingent framework into clinical practice without significant workflow disruptions.Open Acces

Predictive Health Analysis in Industry 5.0: A Scientometric and Systematic Review of Motion Capture in Construction

In an era of rapid technological advancement, the rise of Industry 4.0 has prompted industries to pursue innovative improvements in their processes. As we advance towards Industry 5.0, which focuses more on collaboration between humans and intelligent systems, there is a growing requirement for better sensing technologies for healthcare and safety purposes. Consequently, Motion Capture (MoCap) systems have emerged as critical enablers in this technological evolution by providing unmatched precision and versatility in various workplaces, including construction. As the construction workplace requires physically demanding tasks, leading to work-related musculoskeletal disorders (WMSDs) and health issues, the study explores the increasing relevance of MoCap systems within the concept of Industry 4.0 and 5.0. Despite the growing significance, there needs to be more comprehensive research, a scientometric review that quantitatively assesses the role of MoCap systems in construction. Our study combines bibliometric, scientometric, and systematic review approaches to address this gap, analyzing articles sourced from the Scopus database. A total of 52 papers were carefully selected from a pool of 962 papers for a quantitative study using a scientometric approach and a qualitative, indepth examination. Results showed that MoCap systems are employed to improve worker health and safety and reduce occupational hazards.The in-depth study also finds the most tested construction tasks are masonry, lifting, training, and climbing, with a clear preference for markerless systems

Viewfinder: final activity report

The VIEW-FINDER project (2006-2009) is an 'Advanced Robotics' project that seeks to apply a semi-autonomous robotic system to inspect ground safety in the event of a fire. Its primary aim is to gather data (visual and chemical) in order to assist rescue personnel. A base station combines the gathered information with information retrieved from off-site sources. The project addresses key issues related to map building and reconstruction, interfacing local command information with external sources, human-robot interfaces and semi-autonomous robot navigation. The VIEW-FINDER system is a semi-autonomous; the individual robot-sensors operate autonomously within the limits of the task assigned to them, that is, they will autonomously navigate through and inspect an area. Human operators monitor their operations and send high level task requests as well as low level commands through the interface to any nodes in the entire system. The human interface has to ensure the human supervisor and human interveners are provided a reduced but good and relevant overview of the ground and the robots and human rescue workers therein

A Survey of Applications and Human Motion Recognition with Microsoft Kinect

Microsoft Kinect, a low-cost motion sensing device, enables users to interact with computers or game consoles naturally through gestures and spoken commands without any other peripheral equipment. As such, it has commanded intense interests in research and development on the Kinect technology. In this paper, we present, a comprehensive survey on Kinect applications, and the latest research and development on motion recognition using data captured by the Kinect sensor. On the applications front, we review the applications of the Kinect technology in a variety of areas, including healthcare, education and performing arts, robotics, sign language recognition, retail services, workplace safety training, as well as 3D reconstructions. On the technology front, we provide an overview of the main features of both versions of the Kinect sensor together with the depth sensing technologies used, and review literatures on human motion recognition techniques used in Kinect applications. We provide a classification of motion recognition techniques to highlight the different approaches used in human motion recognition. Furthermore, we compile a list of publicly available Kinect datasets. These datasets are valuable resources for researchers to investigate better methods for human motion recognition and lower-level computer vision tasks such as segmentation, object detection and human pose estimation

Motion capture technology in industrial applications: A systematic review

The rapid technological advancements of Industry 4.0 have opened up new vectors for novel industrial processes that require advanced sensing solutions for their realization. Motion capture (MoCap) sensors, such as visual cameras and inertial measurement units (IMUs), are frequently adopted in industrial settings to support solutions in robotics, additive manufacturing, teleworking and human safety. This review synthesizes and evaluates studies investigating the use of MoCap technologies in industry-related research. A search was performed in the Embase, Scopus, Web of Science and Google Scholar. Only studies in English, from 2015 onwards, on primary and secondary industrial applications were considered. The quality of the articles was appraised with the AXIS tool. Studies were categorized based on type of used sensors, beneficiary industry sector, and type of application. Study characteristics, key methods and findings were also summarized. In total, 1682 records were identified, and 59 were included in this review. Twenty-one and 38 studies were assessed as being prone to medium and low risks of bias, respectively. Camera-based sensors and IMUs were used in 40% and 70% of the studies, respectively. Construction (30.5%), robotics (15.3%) and automotive (10.2%) were the most researched industry sectors, whilst health and safety (64.4%) and the improvement of industrial processes or products (17%) were the most targeted applications. Inertial sensors were the first choice for industrial MoCap applications. Camera-based MoCap systems performed better in robotic applications, but camera obstructions caused by workers and machinery was the most challenging issue. Advancements in machine learning algorithms have been shown to increase the capabilities of MoCap systems in applications such as activity and fatigue detection as well as tool condition monitoring and object recognition