Adiabatic Flip-Flops and Sequential Circuit Design using Novel Resettable Adiabatic Buffers

We propose novel resettable adiabatic buffers for five adiabatic logic families namely; Efficient Adiabatic Charge Recovery Logic (EACRL), Improved Efficient Charge Recovery Logic (IECRL), Positive Feedback Adiabatic Logic (PFAL), Complementary Pass-transistor Adiabatic Logic (CPAL) and Clocked Adiabatic Logic (CAL). We present the design of resettable flip-flops using the proposed buffers. The proposed flip-flops alleviate the problem of increased energy and area consumption incurred by the existing mux-based resettable flip-flops. We then design the 3-bit up-down counters and extended our comparison beyond energy dissipation using the above five adiabatic logic families. PFAL based sequential circuit designs gives the best performance trade-offs in terms of complexity, energy, speed and area compared to the other adiabatic designs

低電力非同期回路の面積高効率化設計

Tohoku University亀山充隆課

The ALICE TPC, a large 3-dimensional tracking device with fast readout for ultra-high multiplicity events

The design, construction, and commissioning of the ALICE Time-Projection Chamber (TPC) is described. It is the main device for pattern recognition, tracking, and identification of charged particles in the ALICE experiment at the CERN LHC. The TPC is cylindrical in shape with a volume close to 90 m^3 and is operated in a 0.5 T solenoidal magnetic field parallel to its axis. In this paper we describe in detail the design considerations for this detector for operation in the extreme multiplicity environment of central Pb--Pb collisions at LHC energy. The implementation of the resulting requirements into hardware (field cage, read-out chambers, electronics), infrastructure (gas and cooling system, laser-calibration system), and software led to many technical innovations which are described along with a presentation of all the major components of the detector, as currently realized. We also report on the performance achieved after completion of the first round of stand-alone calibration runs and demonstrate results close to those specified in the TPC Technical Design Report.Comment: 55 pages, 82 figure

정적 램 및 파워 게이트 회로에 대한 전압 및 보존용 공간 할당 문제

학위논문(박사) -- 서울대학교대학원 : 공과대학 전기·정보공학부, 2021.8. 김태환.칩의 저전력 동작은 중요한 문제이며, 공정이 발전하면서 그 중요성은 점점 커지고 있다. 본 논문은 칩을 구성하는 정적 램(SRAM) 및 로직(logic) 각각에 대해서 저전력으로 동작시키는 방법론을 논한다. 우선, 본 논문에서는 칩을 문턱 전압 근처의 전압(NTV)에서 동작시키고자 할 때 모니터링 회로의 측정을 통해 칩 내의 모든 SRAM 블록에서 동작 실패가 발생하지 않는 최소 동작 전압을 추론하는 방법론을 제안한다. 칩을 NTV 영역에서 동작시키는 것은 에너지 효율성을 증대시킬 수 있는 매우 효과적인 방법 중 하나이지만 SRAM의 경우 동작 실패 때문에 동작 전압을 낮추기 어렵다. 하지만 칩마다 영향을 받는 공정 변이가 다르므로 최소 동작 전압은 칩마다 다르며, 모니터링을 통해 이를 추론해낼 수 있다면 칩별로 SRAM에 서로 다른 전압을 인가해 에너지 효율성을 높일 수 있다. 본 논문에서는 다음과 같은 과정을 통해 이 문제를 해결한다: (1) 디자인 인프라 설계 단계에서는 SRAM의 최소 동작 전압을 추론하고 칩 생산 단계에서는 SRAM 모니터의 측정을 통해 전압을 인가하는 방법론을 제안한다; (2) 칩의 SRAM 비트셀(bitcell)과 주변 회로를 포함한 SRAM 블록들의 공정 변이를 모니터링할 수 있는 SRAM 모니터와 SRAM 모니터에서 모니터링할 대상을 정의한다; (3) SRAM 모니터의 측정값을 이용해 같은 칩에 존재하는 모든 SRAM 블록에서 목표 신뢰수준 내에서 읽기, 쓰기, 및 접근 동작 실패가 발생하지 않는 최소 동작 전압을 추론한다. 벤치마크 회로의 실험 결과는 본 논문에서 제안한 방법을 따라 칩별로 SRAM 블록들의 최소 동작 전압을 다르게 인가할 경우, 기존 방법대로 모든 칩에 동일한 전압을 인가하는 것 대비 수율은 같은 수준으로 유지하면서 SRAM 비트셀 배열의 전력 소모를 감소시킬 수 있음을 보인다. 두 번째로, 본 논문에서는 파워 게이트 회로에서 기존의 보존용 공간 할당 방법들이 지니고 있는 문제를 해결하고 누설 전력 소모를 더 줄일 수 있는 방법론을 제안한다. 기존의 보존용 공간 할당 방법은 멀티플렉서 피드백 루프가 있는 모든 플립플롭에는 무조건 보존용 공간을 할당해야 해야 하기 때문에 다중 비트 보존용 공간의 장점을 충분히 살리지 못하는 문제가 있다. 본 논문에서는 다음과 같은 방법을 통해 보존용 공간을 최소화하는 문제를 해결한다: (1) 보존용 공간 할당 과정에서 멀티플렉서 피드백 루프를 무시할 수 있는 조건을 제시하고, (2) 해당 조건을 이용해 멀티플렉서 피드백 루프가 있는 플립플롭이 많이 존재하는 회로에서 보존용 공간을 최소화한다; (3) 추가로, 플립플롭에 이미 할당된 보존용 공간 중 일부를 제거할 수 있는 조건을 찾고, 이를 이용해 보존용 공간을 더 감소시킨다. 벤치마크 회로의 실험 결과는 본 논문에서 제안한 방법론이 기존의 보존용 공간 할당 방법론보다 더 적은 보존용 공간을 할당하며, 따라서 칩의 면적 및 전력 소모를 감소시킬 수 있음을 보인다.Low power operation of a chip is an important issue, and its importance is increasing as the process technology advances. This dissertation addresses the methodology of operating at low power for each of the SRAM and logic constituting the chip. Firstly, we propose a methodology to infer the minimum operating voltage at which SRAM failure does not occur in all SRAM blocks in the chip operating on near threshold voltage (NTV) regime through the measurement of a monitoring circuit. Operating the chip on NTV regime is one of the most effective ways to increase energy efficiency, but in case of SRAM, it is difficult to lower the operating voltage because of SRAM failure. However, since the process variation on each chip is different, the minimum operating voltage is also different for each chip. If it is possible to infer the minimum operating voltage of SRAM blocks of each chip through monitoring, energy efficiency can be increased by applying different voltage. In this dissertation, we propose a new methodology of resolving this problem. Specifically, (1) we propose to infer minimum operation voltage of SRAM in design infra development phase, and assign the voltage using measurement of SRAM monitor in silicon production phase; (2) we define a SRAM monitor and features to be monitored that can monitor process variation on SRAM blocks including SRAM bitcell and peripheral circuits; (3) we propose a new methodology of inferring minimum operating voltage of SRAM blocks in a chip that does not cause read, write, and access failures under a target confidence level. Through experiments with benchmark circuits, it is confirmed that applying different voltage to SRAM blocks in each chip that inferred by our proposed methodology can save overall power consumption of SRAM bitcell array compared to applying same voltage to SRAM blocks in all chips, while meeting the same yield target. Secondly, we propose a methodology to resolve the problem of the conventional retention storage allocation methods and thereby further reduce leakage power consumption of power gated circuit. Conventional retention storage allocation methods have problem of not fully utilizing the advantage of multi-bit retention storage because of the unavoidable allocation of retention storage on flip-flops with mux-feedback loop. In this dissertation, we propose a new methodology of breaking the bottleneck of minimizing the state retention storage. Specifically, (1) we find a condition that mux-feedback loop can be disregarded during the retention storage allocation; (2) utilizing the condition, we minimize the retention storage of circuits that contain many flip-flops with mux-feedback loop; (3) we find a condition to remove some of the retention storage already allocated to each of flip-flops and propose to further reduce the retention storage. Through experiments with benchmark circuits, it is confirmed that our proposed methodology allocates less retention storage compared to the state-of-the-art methods, occupying less cell area and consuming less power.1 Introduction 1 1.1 Low Voltage SRAM Monitoring Methodology 1 1.2 Retention Storage Allocation on Power Gated Circuit 5 1.3 Contributions of this Dissertation 8 2 SRAM On-Chip Monitoring Methodology for High Yield and Energy Efficient Memory Operation at Near Threshold Voltage 13 2.1 SRAM Failures 13 2.1.1 Read Failure 13 2.1.2 Write Failure 15 2.1.3 Access Failure 16 2.1.4 Hold Failure 16 2.2 SRAM On-chip Monitoring Methodology: Bitcell Variation 18 2.2.1 Overall Flow 18 2.2.2 SRAM Monitor and Monitoring Target 18 2.2.3 Vfail to Vddmin Inference 22 2.3 SRAM On-chip Monitoring Methodology: Peripheral Circuit IR Drop and Variation 29 2.3.1 Consideration of IR Drop 29 2.3.2 Consideration of Peripheral Circuit Variation 30 2.3.3 Vddmin Prediction including Access Failure Prohibition 33 2.4 Experimental Results 41 2.4.1 Vddmin Considering Read and Write Failures 42 2.4.2 Vddmin Considering Read/Write and Access Failures 45 2.4.3 Observation for Practical Use 45 3 Allocation of Always-On State Retention Storage for Power Gated Circuits - Steady State Driven Approach 49 3.1 Motivations and Analysis 49 3.1.1 Impact of Self-loop on Power Gating 49 3.1.2 Circuit Behavior Before Sleeping 52 3.1.3 Wakeup Latency vs. Retention Storage 54 3.2 Steady State Driven Retention Storage Allocation 56 3.2.1 Extracting Steady State Self-loop FFs 57 3.2.2 Allocating State Retention Storage 59 3.2.3 Designing and Optimizing Steady State Monitoring Logic 59 3.2.4 Analysis of the Impact of Steady State Monitoring Time on the Standby Power 63 3.3 Retention Storage Refinement Utilizing Steadiness 65 3.3.1 Extracting Flip-flops for Retention Storage Refinement 66 3.3.2 Designing State Monitoring Logic and Control Signals 68 3.4 Experimental Results 73 3.4.1 Comparison of State Retention Storage 75 3.4.2 Comparison of Power Consumption 79 3.4.3 Impact on Circuit Performance 82 3.4.4 Support for Immediate Power Gating 83 4 Conclusions 89 4.1 Chapter 2 89 4.2 Chapter 3 90박

Development of land based radar polarimeter processor system

The processing subsystem of a land based radar polarimeter was designed and constructed. This subsystem is labeled the remote data acquisition and distribution system (RDADS). The radar polarimeter, an experimental remote sensor, incorporates the RDADS to control all operations of the sensor. The RDADS uses industrial standard components including an 8-bit microprocessor based single board computer, analog input/output boards, a dynamic random access memory board, and power supplis. A high-speed digital electronics board was specially designed and constructed to control range-gating for the radar. A complete system of software programs was developed to operate the RDADS. The software uses a powerful real time, multi-tasking, executive package as an operating system. The hardware and software used in the RDADS are detailed. Future system improvements are recommended

High-Performance Robust Latches

First, a new high-performance robust latch (referred to as HiPeR latch) is presented that is insensitive to transient faults affecting its internal and output nodes by design, independently of the size of its transistors. Then, a modified version of the HiPeR latch (referred as HiPeR-CG) is proposed that is suitable to be used together with clock gating. Both proposed latches are faster than the latches most recently presented in the literature, while providing better or comparable robustness to transient faults, at comparable or lower costs in terms of area and power, respectively. Therefore, thanks to the good trade-offs in terms of performance, robustness, and cost, our proposed latches are particularly suitable to be adopted on critical paths

Solar gamma ray monitor for OSO-H (0.3-10 MeV)

A gamma ray experiment to be flown aboard the OSO-7 spacecraft is described along with a history of the development of the experiment, a description of the gamma ray detector and its operation, and a short preliminary review of the scientific information obtained during the instruments' lifetime. The gamma ray detector operated an average of 18 hours a day for approximately 15 months. The majority of the data was collected in the solar and antisolar direction, but data at right angles to the spacecraft-sun line was also accumulated. In all, at least two full scans of the celestial sphere were completed

Dynamic Power Management for Neuromorphic Many-Core Systems

This work presents a dynamic power management architecture for neuromorphic many core systems such as SpiNNaker. A fast dynamic voltage and frequency scaling (DVFS) technique is presented which allows the processing elements (PE) to change their supply voltage and clock frequency individually and autonomously within less than 100 ns. This is employed by the neuromorphic simulation software flow, which defines the performance level (PL) of the PE based on the actual workload within each simulation cycle. A test chip in 28 nm SLP CMOS technology has been implemented. It includes 4 PEs which can be scaled from 0.7 V to 1.0 V with frequencies from 125 MHz to 500 MHz at three distinct PLs. By measurement of three neuromorphic benchmarks it is shown that the total PE power consumption can be reduced by 75%, with 80% baseline power reduction and a 50% reduction of energy per neuron and synapse computation, all while maintaining temporary peak system performance to achieve biological real-time operation of the system. A numerical model of this power management model is derived which allows DVFS architecture exploration for neuromorphics. The proposed technique is to be used for the second generation SpiNNaker neuromorphic many core system

DFT Architecture with Power-Distribution-Network Consideration for Delay-based Power Gating Test

This paper shows that existing delay-based testing techniques for power gating exhibit both fault coverage and yield loss due to deviations at the charging delay introduced by the distributed nature of the power-distribution-networks (PDNs). To restore this test quality loss, which could reach up to 67.7% of false passes and 25% of false fails due to stuck-open faults, we propose a design-for-testability (DFT) logic that accounts for a distributed PDN. The proposed logic is optimized by an algorithm that also handles uncertainty due to process variations and offers trade-off flexibility between test-application time and area cost. A calibration process is proposed to bridge model-to-hardware discrepancies and increase test quality when considering systematic variations. Through SPICE simulations, we show complete recovery of the test quality lost due to PDNs. The proposed method is robust sustaining 80.3% to 98.6% of the achieved test quality under high random and systematic process variations. To the best of our knowledge, this paper presents the first analysis of the PDN impact on test quality and offers a unified test solution for both ring and grid power gating styles