31 research outputs found

    The European Space Agency BIOMASS mission: Measuring forest above-ground biomass from space

    Get PDF
    The primary objective of the European Space Agency's 7th Earth Explorer mission, BIOMASS, is to determine the worldwide distribution of forest above-ground biomass (AGB) in order to reduce the major uncertainties in calculations of carbon stocks and fluxes associated with the terrestrial biosphere, including carbon fluxes associated with Land Use Change, forest degradation and forest regrowth. To meet this objective it will carry, for the first time in space, a fully polarimetric P-band synthetic aperture radar (SAR). Three main products will be provided: global maps of both AGB and forest height, with a spatial resolution of 200 m, and maps of severe forest disturbance at 50 m resolution (where “global” is to be understood as subject to Space Object tracking radar restrictions). After launch in 2022, there will be a 3-month commissioning phase, followed by a 14-month phase during which there will be global coverage by SAR tomography. In the succeeding interferometric phase, global polarimetric interferometry Pol-InSAR coverage will be achieved every 7 months up to the end of the 5-year mission. Both Pol-InSAR and TomoSAR will be used to eliminate scattering from the ground (both direct and double bounce backscatter) in forests. In dense tropical forests AGB can then be estimated from the remaining volume scattering using non-linear inversion of a backscattering model. Airborne campaigns in the tropics also indicate that AGB is highly correlated with the backscatter from around 30 m above the ground, as measured by tomography. In contrast, double bounce scattering appears to carry important information about the AGB of boreal forests, so ground cancellation may not be appropriate and the best approach for such forests remains to be finalized. Several methods to exploit these new data in carbon cycle calculations have already been demonstrated. In addition, major mutual gains will be made by combining BIOMASS data with data from other missions that will measure forest biomass, structure, height and change, including the NASA Global Ecosystem Dynamics Investigation lidar deployed on the International Space Station after its launch in December 2018, and the NASA-ISRO NISAR L- and S-band SAR, due for launch in 2022. More generally, space-based measurements of biomass are a core component of a carbon cycle observation and modelling strategy developed by the Group on Earth Observations. Secondary objectives of the mission include imaging of sub-surface geological structures in arid environments, generation of a true Digital Terrain Model without biases caused by forest cover, and measurement of glacier and icesheet velocities. In addition, the operations needed for ionospheric correction of the data will allow very sensitive estimates of ionospheric Total Electron Content and its changes along the dawn-dusk orbit of the mission

    SensibilitĂ© des observables radars Ă  la variabilitĂ© temporelle et Ă  la configuration gĂ©omĂ©trique de forĂȘts tempĂ©rĂ©es et tropicales Ă  partir de mesure de proximitĂ© haute-rĂ©solution

    Get PDF
    L'augmentation importante de la population mondiale, et par consĂ©quent de ses besoins, exerce une pression de plus en plus importante sur les surfaces forestiĂšres. L'outil le mieux adaptĂ© au suivi des forĂȘts, Ă  l'Ă©chelle du globe, est la tĂ©lĂ©dĂ©tection. C'est dans ce contexte que se situe ce travail de thĂšse, qui vise Ă  amĂ©liorer l'estimation des paramĂštres biophysiques des arbres Ă  partir de donnĂ©es de tĂ©lĂ©dĂ©tection. L'originalitĂ© de ce travail a Ă©tĂ© d'Ă©tudier cette estimation des paramĂštres biophysiques en menant plusieurs Ă©tudes de sensibilitĂ© avec une dĂ©marche expĂ©rimentale sur des donnĂ©es expĂ©rimentales et sur des donnĂ©es simulĂ©es. Tout d'abord, l'Ă©tude s'est portĂ©e sur des sĂ©ries temporelles de mesures de diffusiomĂ©trie radar obtenues sur deux sites : l'un constituĂ© d'un cĂšdre en zone tempĂ©rĂ©e et l'autre d'une parcelle de forĂȘt tropicale. Puis, cette Ă©tude de sensibilitĂ© a Ă©tĂ© poursuivie en imageant, avec une rĂ©solution Ă©levĂ©e, plusieurs parcelles aux configurations diffĂ©rentes Ă  l'intĂ©rieur d'une forĂȘt de pin. Enfin, des donnĂ©es optiques et radars simulĂ©es ont Ă©tĂ© fusionnĂ©s afin d'Ă©valuer l'apport de la fusion de donnĂ©es optique et radar dans l'inversion des paramĂštres biophysiques.The significant increase of the world population, and therefore its needs, pushes increasingly high in forest areas. The best tool for monitoring forest across the globe is remote sensing. It is in this context that this thesis, which aims to improve the retrieval of biophysical parameters of trees from remote sensing data, takes place. The originality of this work was to study the estimation of biophysical parameters across multiple sensitivity studies on experimental data and simulated data. First, the study focused on the time series of radar scatterometry measurements obtained on two sites: one characterized by a cedar in the temperate zone and the other by a forest plot of rainforest. Then, the sensitivity analysis was continued by imaging with high resolution, several forest plots with different configurations within a pine forest. Finally, simulated radar and optical data were combined to evaluate the contribution of optical and radar data fusion in the inversion of biophysical parameters.RENNES1-Bibl. Ă©lectronique (352382106) / SudocSudocFranceF

    Temporal Characteristics of Boreal Forest Radar Measurements

    Get PDF
    Radar observations of forests are sensitive to seasonal changes, meteorological variables and variations in soil and tree water content. These phenomena cause temporal variations in radar measurements, limiting the accuracy of tree height and biomass estimates using radar data. The temporal characteristics of radar measurements of forests, especially boreal forests, are not well understood. To fill this knowledge gap, a tower-based radar experiment was established for studying temporal variations in radar measurements of a boreal forest site in southern Sweden. The work in this thesis involves the design and implementation of the experiment and the analysis of data acquired. The instrument allowed radar signatures from the forest to be monitored over timescales ranging from less than a second to years. A purpose-built, 50 m high tower was equipped with 30 antennas for tomographic imaging at microwave frequencies of P-band (420-450 MHz), L-band (1240-1375 MHz) and C-band (5250-5570 MHz) for multiple polarisation combinations. Parallel measurements using a 20-port vector network analyser resulted in significantly shorter measurement times and better tomographic image quality than previous tower-based radars. A new method was developed for suppressing mutual antenna coupling without affecting the range resolution. Algorithms were developed for compensating for phase errors using an array radar and for correcting for pixel-variant impulse responses in tomographic images. Time series results showed large freeze/thaw backscatter variations due to freezing moisture in trees. P-band canopy backscatter variations of up to 10 dB occurred near instantaneously as the air temperature crossed 0⁰C, with ground backscatter responding over longer timescales. During nonfrozen conditions, the canopy backscatter was very stable with time. Evidence of backscatter variations due to tree water content were observed during hot summer periods only. A high vapour pressure deficit and strong winds increased the rate of transpiration fast enough to reduce the tree water content, which was visible as 0.5-2 dB backscatter drops during the day. Ground backscatter for cross-polarised observations increased during strong winds due to bending tree stems. Significant temporal decorrelation was only seen at P-band during freezing, thawing and strong winds. Suitable conditions for repeat-pass L-band interferometry were only seen during the summer. C-band temporal coherence was high over timescales of seconds and occasionally for several hours for night-time observations during the summer. Decorrelation coinciding with high transpiration rates was observed at L- and C-band, suggesting sensitivity to tree water dynamics.The observations from this experiment are important for understanding, modelling and mitigating temporal variations in radar observables in forest parameter estimation algorithms. The results also are also useful in the design of spaceborne synthetic aperture radar missions with interferometric and tomographic capabilities. The results motivate the implementation of single-pass interferometric synthetic aperture radars for forest applications at P-, L- and C-band

    Mapping above-ground biomass in tropical forests with ground-cancelled P-band SAR and limited reference data

    Get PDF
    This paper introduces the CASINO (CAnopy backscatter estimation, Subsampling, and Inhibited Nonlinear Optimisation) algorithm for above-ground biomass (AGB) estimation in tropical forests using P-band (435 MHz) synthetic aperture radar (SAR) data. The algorithm has been implemented in a prototype processor for European Space Agency's (ESA's) 7th Earth Explorer Mission BIOMASS, scheduled for launch in 2023. CASINO employs an interferometric ground cancellation technique to estimate canopy backscatter (CB) intensity. A power law model (PLM) is then used to model the dependence of CB on AGB for a large number of systematically distributed SAR data samples and a small number of calibration areas with a known AGB. The PLM parameters and AGB for the samples are estimated simultaneously within pre-defined intervals using nonlinear minimisation of a cost function. The performance of CASINO is assessed over six tropical forest sites on two continents: two in French Guiana, South America and four in Gabon, Africa, using SAR data acquired during airborne ESA campaigns and processed to simulate BIOMASS acquisitions. Multiple tests with only two randomly selected calibration areas with AGB > 100 t/ha are conducted to assess AGB estimation performance given limited reference data. At 2.25 ha scale and using a single flight heading, the root-mean-square difference (RMSD) is ≀ 27% for at least 50% of all tests in each test site and using as reference AGB maps derived from airborne laser scanning data. An improvement is observed when two flight headings are used in combination. The most consistent AGB estimation (lowest RMSD variation across different calibration sets) is observed for test sites with a large AGB interval and average AGB around 200–250 t/ha. The most challenging conditions are in areas with AGB < 200 t/ha and large topographic variations. A comparison with 142 1 ha plots distributed across all six test sites and with AGB estimated from in situ measurements gives an RMSD of 20% (66 t/ha)

    Temporal survey of P- A nd L-band polarimetric backscatter in boreal forests

    Get PDF
    Environmental conditions and seasonal variations affect the backscattered radar signal from a forest. This potentially causes errors in a biomass retrieval scheme using data from the synthetic aperture radar (SAR) data. A better understanding of these effects and the electromagnetic scattering mechanisms in forests is required to improve biomass estimation algorithms for current and upcoming P- A nd L-band SAR missions. In this paper, temporal changes in HH-, VV-, and HV-polarized P- A nd L-band radar backscatter and temporal coherence from a boreal forest site are analyzed in relation to environmental parameters. The radar data were collected from a stand of mature Norway spruce ( Picea abies (L.) Karst.) with an above-ground biomass of approximately 250 tons/ha at intervals of 5 min from January to August 2017 using the BorealScat tower-based scatterometer. It was observed that subzero temperatures during the winters cause large variations (4 to 10 dB) in P- A nd L-band backscatter, for which the HH/VV backscatter ratio offered some mitigation. High wind speeds were also seen to cause deviations in the average backscatter at P-band due to decreased double-bounce scattering. Severe temporal decorrelation was observed at L-band over timescales of days or more, whereas the P-band temporal coherence remained high (&gt; 0.9) for at least a month neglecting windy periods. Temporal coherence at P-band was highest during night times when wind speeds are low

    Study of the speckle noise effects over the eigen decomposition of polarimetric SAR data: a review

    No full text
    This paper is focused on considering the effects of speckle noise on the eigen decomposition of the co- herency matrix. Based on a perturbation analysis of the matrix, it is possible to obtain an analytical expression for the mean value of the eigenvalues and the eigenvectors, as well as for the Entropy, the Anisotroopy and the dif- ferent a angles. The analytical expressions are compared against simulated polarimetric SAR data, demonstrating the correctness of the different expressions.Peer ReviewedPostprint (published version

    Predictions of Biomass Change in a Hemi-Boreal Forest Based on Multi-Polarization L- and P-Band SAR Backscatter

    Get PDF
    Above-ground biomass change accumulated during four growth seasons in a hemi-boreal forest was predicted using airborne L- and P-band synthetic aperture radar (SAR) backscatter. The radar data were collected in the BioSAR 2007 and BioSAR 2010 campaigns over the Remningstorp test site in southern Sweden. Regression models for biomass change were developed from biomass maps created using airborne LiDAR data and field measurements. To facilitate training and prediction on image pairs acquired at different dates, a backscatter offset correction method for L-band data was developed and evaluated. The correction, based on the HV/VV backscatter ratio, facilitated predictions across image pairs almost identical to those obtained using data from the same image pair for both training and prediction. For P-band, previous positive results using an offset correction based on the HH/VV ratio were validated. The best L-band model achieved a root mean square error (RMSE) of 21 t/ha, and the best P-band model achieved an RMSE of 19 t/ha. Those accuracies are similar to that of the LiDAR-based biomass change of 18 t/ha. The limitation of using LiDAR-based data for training was considered. The findings demonstrate potential for improved biomass change predictions from L-band backscatter despite varying environmental conditions and calibration uncertainties

    Estimation of Forest Biomass and Faraday Rotation using Ultra High Frequency Synthetic Aperture Radar

    Get PDF
    Synthetic Aperture Radar (SAR) data in the Ultra High Frequency (UHF; 300 MHz – 3 GHz)) band have been shown to be strongly dependent of forest biomass, which is a poorly estimated variable in the global carbon cycle. In this thesis UHF-band SAR data from the fairly flat hemiboreal test site Remningstorp in southern Sweden were analysed. The data were collected on several occasions with different moisture conditions during the spring of 2007. Regression models for biomass estimation on stand level (0.5-9 ha) were developed for each date on which SAR data were acquired. For L-band (centre frequency 1.3 GHz) the best estimation model was based on HV-polarized backscatter, giving a root mean squared error (rmse) between 31% and 46% of the mean biomass. For P-band (centre frequency 340 MHz), regression models including HH, HV or HH and HV backscatter gave an rmse between 18% and 27%. Little or no saturation effects were observed up to 290 t/ha for P-band. A model based on physical-optics has been developed and was used to predict HH-polarized SAR data with frequencies from 20 MHz to 500 MHz from a set of vertical trunks standing on an undulating ground surface. The model shows that ground topography is a critical issue in SAR imaging for these frequencies. A regression model for biomass estimation which includes a correction for ground slope was developed using multi-polarized P-band SAR data from Remningstorp as well as from the boreal test site Krycklan in northern Sweden. The latter test site has pronounced topographic variability. It was shown that the model was able to partly compensate for moisture variability, and that the model gave an rmse of 22-33% when trained using data from Krycklan and evaluated using data from Remningstorp. Regression modelling based on P-band backscatter was also used to estimate biomass change using data acquired in Remningstorp during the spring 2007 and during the fall 2010. The results show that biomass change can be measured with an rmse of about 15% or 20 tons/ha. This suggests that not only deforestation, but also forest growth and degradation (e.g. thinning) can be measured using P-band SAR data. The thesis also includes result on Faraday rotation, which is an ionospheric effect which can have a significant impact on spaceborne UHF-band SAR images. Faraday rotation angles are estimated in spaceborne L-band SAR data. Estimates based on distributed targets and calibration targets with high signal to clutter ratios are found to be in very good agreement. Moreover, a strong correlation with independent measurements of Total Electron Content is found, further validating the estimates

    Proceedings of the Third Spaceborne Imaging Radar Symposium

    Get PDF
    This publication contains summaries of the papers presented at the Third Spaceborne Imaging Radar Symposium held at the Jet Propulsion Laboratory (JPL), California Institute of Technology, in Pasadena, California, on 18-21 Jan. 1993. The purpose of the symposium was to present an overview of recent developments in the different scientific and technological fields related to spaceborne imaging radars and to present future international plans. This symposium is the third in a series of 'Spaceborne Imaging Radar' symposia held at JPL. The first symposium was held in Jan. 1983 and the second in 1986
    corecore