Neoteric Design Power Sustained 3-Bit Asynchronous Counter Using CNFET Based MCML Topology

Leading digital circuits namely register, flipflops, state machines and counters drive operational aspects and potential applications in Integrated Circuit (IC) industry. MOS Current Mode Logic (MCML) based implementations with rapid response and simul- taneous generation of complemented output is all set to become indispensable in nano regime industry. This paper attempts to optimize and address performance- based analysis of digital circuits namely NAND, D flipflop and 3-bit asynchronous counter by practicing MCML based implementation. These circuits are con- templated on four design parameters namely delay (tp), power (pwr), Power Delay Product (PDP) and Energy Delay Product (EDP). This research focuses on rel- ative analysis and emanate a salient optimal appli- cation of Complementary Metal-Oxide-Semiconductor (CMOS) and Carbon Nanotube Field Effect Transistor (CNFET) based 3-bit asynchronous counter. In ad- dition to this, the two configurations of the MCML counter are then compared against applied VDD at 16-nm technology nodes using HSPICE simulator. CNFET based 3-bit MCML counter is observed to be much faster (9.75×), significant improvement in gross power dissipation (11.93×), material refine- ment in PDP and EDP (116.39× and 1165×) re- spectively as compared to the conventional counter- part. Therefore, CNFET based implementations comes to the fore as resilient technology supporting high level integration in nano scale regime

Design and modelling of clock and data recovery integrated circuit in 130 nm CMOS technology for 10 Gb/s serial data communications

This thesis describes the design and implementation of a fully monolithic 10 Gb/s phase and frequency-locked loop based clock and data recovery (PFLL-CDR) integrated circuit, as well as the Verilog-A modeling of an asynchronous serial link based chip to chip communication system incorporating the proposed concept. The proposed design was implemented and fabricated using the 130 nm CMOS technology offered by UMC (United Microelectronics Corporation). Different PLL-based CDR circuits topologies were investigated in terms of architecture and speed. Based on the investigation, we proposed a new concept of quarter-rate (i.e. the clocking speed in the circuit is 2.5 GHz for 10 Gb/s data rate) and dual-loop topology which consists of phase-locked and frequency-locked loop. The frequency-locked loop (FLL) operates independently from the phase-locked loop (PLL), and has a highly-desired feature that once the proper frequency has been acquired, the FLL is automatically disabled and the PLL will take over to adjust the clock edges approximately in the middle of the incoming data bits for proper sampling. Another important feature of the proposed quarter-rate concept is the inherent 1-to-4 demultiplexing of the input serial data stream. A new quarter-rate phase detector based on the non-linear early-late phase detector concept has been used to achieve the multi-Giga bit/s speed and to eliminate the need of the front-end data pre-processing (edge detecting) units usually associated with the conventional CDR circuits. An eight-stage differential ring oscillator running at 2.5 GHz frequency center was used for the voltage-controlled oscillator (VCO) to generate low-jitter multi-phase clock signals. The transistor level simulation results demonstrated excellent performances in term of locking speed and power consumption. In order to verify the accuracy of the proposed quarter-rate concept, a clockless asynchronous serial link incorporating the proposed concept and communicating two chips at 10 Gb/s has been modelled at gate level using the Verilog-A language and time-domain simulated

Side Channel Information Leakage: Design and Implementation of Hardware Countermeasure

Deployment of Dynamic Differential Logics (DDL) appears to be a promising choice for providing resistance against leakage of side channel information. However, the resistance provided by these logics is too costly for widespread area-constrained applications. Implementation of a secure DDL-based countermeasure also requires a complex layout methodology for balancing the load at the differential outputs. This thesis, unlike previous logic level approaches, presents a novel exploitation of static and single-ended logic for designing the side channel countermeasure. The proposed technique is used in the implementation of a protected crypto core consisting of the AES “AddRoundKey” and “SubByte” transformation. The test chip including the protected and unprotected crypto cores is fabricated in 180nm CMOS technology. A correlation analysis on the unprotected core results in revealing the key at the output of the combinational networks and the registers. The quality of the measurements is further improved by introducing an enhanced data capturing method that inserts a minimum power consuming input as a reference vector. In comparison, no key-related information is leaked from the protected core even with an order of magnitude increase in the number of averaged traces. For the first time, fabricated chip results are used to validate a new logic level side channel countermeasure that offers lower area and reduced circuit design complexity compared to the DDL-based countermeasures. This thesis also provides insight into the side channel vulnerability of cryptosystems in sub-90nm CMOS technology nodes. In particular, data dependency of leakage power is analyzed. The number of traces to disclose the key is seen to decrease by 35% from 90nm to 45nm CMOS technology nodes. Analysis shows that the temperature dependency of the subthreshold leakage has an important role in increasing the ability to attack future nanoscale crypto cores. For the first time, the effectiveness of a circuit-based leakage reduction technique is examined for side channel security. This investigation demonstrates that high threshold voltage transistor assignment improves resistance against information leakage. The analysis initiated in this thesis is crucial for rolling out the guidelines of side channel security for the next generation of Cryptosystem.1 yea

Enhanced Hardware Security Using Charge-Based Emerging Device Technology

The emergence of hardware Trojans has largely reshaped the traditional view that the hardware layer can be blindly trusted. Hardware Trojans, which are often in the form of maliciously inserted circuitry, may impact the original design by data leakage or circuit malfunction. Hardware counterfeiting and IP piracy are another two serious issues costing the US economy more than $200 billion annually. A large amount of research and experimentation has been carried out on the design of these primitives based on the currently prevailing CMOS technology. However, the security provided by these primitives comes at the cost of large overheads mostly in terms of area and power consumption. The development of emerging technologies provides hardware security researchers with opportunities to utilize some of the otherwise unusable properties of emerging technologies in security applications. In this dissertation, we will include the security consideration in the overall performance measurements to fully compare the emerging devices with CMOS technology. The first approach is to leverage two emerging devices (Silicon NanoWire and Graphene SymFET) for hardware security applications. Experimental results indicate that emerging device based solutions can provide high level circuit protection with relatively lower performance overhead compared to conventional CMOS counterpart. The second topic is to construct an energy-efficient DPA-resilient block cipher with ultra low-power Tunnel FET. Current-mode logic is adopted as a circuit-level solution to countermeasure differential power analysis attack, which is mostly used in the cryptographic system. The third investigation targets on potential security vulnerability of foundry insider\u27s attack. Split manufacturing is adopted for the protection on radio-frequency (RF) circuit design

Algorithms and VLSI architectures for parametric additive synthesis

A parametric additive synthesis approach to sound synthesis is advantageous as it can model sounds in a large scale manner, unlike the classical sinusoidal additive based synthesis paradigms. It is known that a large body of naturally occurring sounds are resonant in character and thus fit the concept well. This thesis is concerned with the computational optimisation of a super class of form ant synthesis which extends the sinusoidal parameters with a spread parameter known as band width. Here a modified formant algorithm is introduced which can be traced back to work done at IRCAM, Paris. When impulse driven, a filter based approach to modelling a formant limits the computational work-load. It is assumed that the filter's coefficients are fixed at initialisation, thus avoiding interpolation which can cause the filter to become chaotic. A filter which is more complex than a second order section is required. Temporal resolution of an impulse generator is achieved by using a two stage polyphase decimator which drives many filterbanks. Each filterbank describes one formant and is composed of sub-elements which allow variation of the formant’s parameters. A resource manager is discussed to overcome the possibility of all sub- banks operating in unison. All filterbanks for one voice are connected in series to the impulse generator and their outputs are summed and scaled accordingly. An explorative study of number systems for DSP algorithms and their architectures is investigated. I invented a new theoretical mechanism for multi-level logic based DSP. Its aims are to reduce the number of transistors and to increase their functionality. A review of synthesis algorithms and VLSI architectures are discussed in a case study between a filter based bit-serial and a CORDIC based sinusoidal generator. They are both of similar size, but the latter is always guaranteed to be stable

The IPS fidelity scale as a guideline to implement Supported Employment

info:eu-repo/semantics/publishe

A Novel Very Low Voltage Topology to implement MCML XOR Gates

A new very low-voltage topology to implement MOS current mode logic (MCML) XOR gates is proposed in this paper. Instead of stacking several level of transistors to implement a two inputs XOR gate, a p-type differential pair is used to steer the current in n-type differential pairs through current mirrors. The proposed topology allows to reduce the minimum supply voltage of MCML XOR gates while guaranteeing a fully current mode behavior as in the conventional XOR gate. The proposed topology has been compared against the conventional and triple tail MCML XOR gates. Simulation results referring to a 40nm CMOS technology for VDD=1V confirm that the XOR gate presented in this work exhibits a lower propagation delay than the previously published low voltage MCML XOR gate. Furthermore both theoretical analysis and simulation results in a 40nm process show that the proposed topology is able to work with a VDD as low as 0.65V whereas state of the art topologies are not usable below 0.8V

Architecture FPGA améliorée et flot de conception pour une reconfiguration matérielle en ligne efficace

The self-reconfiguration capabilities of modern FPGA architectures pave the way for dynamic applications able to adapt to transient events. The CAD flows of modern architectures are nowadays mature but limited by the constraints induced by the complexity of FPGA circuits. In this thesis, multiple contributions are developed to propose an FPGA architecture supporting the dynamic placement of hardware tasks. First, an intermediate representation of these tasks configuration data, independent from their final position, is presented. This representation allows to compress the task data up to 11x with regard to its conventional raw counterpart. An accompanying CAD flow, based on state-of-the-art tools, is proposed to generate relocatable tasks from a high-level description. Then, the online behavior of this mechanism is studied. Two algorithms allowing to decode and create in real-time the conventional bit-stream are described. In addition, an enhancement of the FPGA interconnection network is proposedto increase the placement flexibility of heterogeneous tasks, at the cost of a 10% increase in average of the critical path delay. Eventually, a configurable substitute to the configuration memory found in FPGAs is studied to ease their partial reconfiguration.Les capacités d'auto-reconfiguration des architectures FPGA modernes ouvrent la voie à des applications dynamiques capables d'adapter leur fonctionnement pour répondre à des évènements ponctuels. Les flots de reconfiguration des architectures commerciales sont aujourd'hui aboutis mais limités par des contraintes inhérentes à la complexité de ces circuits. Dans cette thèse, plusieurs contributions sont avancées afin de proposer une architecture FPGA reconfigurable permettant le placement dynamique de tâches matérielles. Dans un premier temps, une représentation intermédiaire des données de configuration de ces tâches, indépendante de leur positionnement final, est présentée. Cette représentation permet notamment d'atteindre des taux de compression allant jusqu'à 11x par rapport à la représentation brute d'une tâche. Un flot de conception basé sur des outils de l'état de l'art accompagne cette représentation et génère des tâches relogeables à partir d'une description haut-niveau. Ensuite, le comportement en ligne de ce mécanisme est étudié. Deux algorithmes permettant le décodage de ces tâches et la génération en temps-réel des données de configuration propres à l'architectures son décrits. Par ailleurs, une amélioration du réseau d'interconnexion d'une architecture FPGA est proposée pour accroître la flexibilité du placement de tâches hétérogènes, avec une augmentation de 10% en moyenne du délai du chemin critique. Enfin, une alternative programmable aux mémoires de configuration de ces circuits est étudiée pour faciliter leur reconfiguration partielle

High-level services for networks-on-chip

Future technology trends envision that next-generation Multiprocessors Systems-on- Chip (MPSoCs) will be composed of a combination of a large number of processing and storage elements interconnected by complex communication architectures. Communication and interconnection between these basic blocks play a role of crucial importance when the number of these elements increases. Enabling reliable communication channels between cores becomes therefore a challenge for system designers. Networks-on-Chip (NoCs) appeared as a strategy for connecting and managing the communication between several design elements and IP blocks, as required in complex Systems-on-Chip (SoCs). The topic can be considered as a multidisciplinary synthesis of multiprocessing, parallel computing, networking, and on- chip communication domains. Networks-on-Chip, in addition to standard communication services, can be employed for providing support for the implementation of system-level services. This dissertation will demonstrate how high-level services can be added to an MPSoC platform by embedding appropriate hardware/software support in the network interfaces (NIs) of the NoC. In this dissertation, the implementation of innovative modules acting in parallel with protocol translation and data transmission in NIs is proposed and evaluated. The modules can support the execution of the high-level services in the NoC at a relatively low cost in terms of area and energy consumption. Three types of services will be addressed and discussed: security, monitoring, and fault tolerance. With respect to the security aspect, this dissertation will discuss the implementation of an innovative data protection mechanism for detecting and preventing illegal accesses to protected memory blocks and/or memory mapped peripherals. The second aspect will be addressed by proposing the implementation of a monitoring system based on programmable multipurpose monitoring probes aimed at detecting NoC internal events and run-time characteristics. As last topic, new architectural solutions for the design of fault tolerant network interfaces will be presented and discussed