Delamination growth in composite materials

Research related to growth of an imbedded through-width delamination (ITWD) in a compression loaded composite structural element is presented. Composites with widely different interlaminar fracture resistance were examined, viz., graphite/epoxy (CYCOM 982) and graphite/PEEK (APC-2). The initial part of the program consisted of characterizing the material in tension, compression and shear mainly to obtain consistent material properties for analysis, but also as a check of the processing method developed for the thermoplastic APC-2 material. The characterization of the delamination growth in the ITWD specimen, which for the unidirectional case is essentially a mixed Mode 1 and 2 geometry, requires verified mixed-mode growth criteria for the two materials involved. For this purpose the main emphasis during this part of the investigation was on Mode 1 and 2 fracture specimens, namely the Double Cantilever Beam (DCB) and End Notched Flexure (ENF) specimens

Delamination growth in composite materials

The Double Cantilever Beam (DCB) and the End Notched Flexure (ENF) specimens are employed to characterize MODE I and MODE II interlaminar fracture resistance of graphite/epoxy (CYCOM 982) and graphite/PEEK (APC2) composites. Sizing of test specimen geometries to achieve crack growth in the linear elastic regime is presented. Data reduction schemes based upon beam theory are derived for the ENF specimen and include the effects of shear deformation and friction between crack surfaces on compliance, C, and strain energy release rate, G sub II. Finite element (FE) analyses of the ENF geometry including the contact problem with friction are presented to assess the accuracy of beam theory expressions for C and G sub II. Virtual crack closure techniques verify that the ENF specimen is a pure Mode II test. Beam theory expressions are shown to be conservative by 20 to 40 percent for typical unidirectional test specimen geometries. A FE parametric study investigating the influence of delamination length and depth, span, thickness and material properties on G sub II is presented. Mode I and II interlaminar fracture test results are presented. Important experimental parameters are isolated, such as precracking techniques, rate effects, and nonlinear load-deflection response. It is found that subcritical crack growth and inelastic materials behavior, responsible for the observed nonlinearities, are highly rate-dependent phenomena with high rates generally leading to linear elastic response

Beam Element Structural Dynamics Modification Using Experimental Modal Rotational Data

Structural dynamic modification (SDM) of a fixed-free (cantilever) beam to convert it into a fixed-fixed beam with experimental modal data is presented. The SDM focuses on incorporating experimental rotational degrees-of-freedom (DOF) measured with a novel laser measurement technique. A cantilever beam is tested to develop the experimental modal database including rotational degrees of freedom. A modal database from a finite-element model also is developed for comparison. A structural dynamic modification, with both databases, is performed using a Bernoulli-Euler beam to ground the free end of the cantilever beam. The hardware is then modified and a second experimental modal analysis of the resulting fixed-fixed beam performed. A finite-element model of the fixed-fixed beam also was created. Comparison of results from these four tests are used to assess the effectiveness of SDM using experimental modal rotational data. The evaluation shows that provided high quality experimental rotational modal data can be acquired, SDM work with beam elements can be effective in yielding accurate results

Developing young people's sense of self and place through sport

Previous research has recognized positive health implications, both physical and mental, as an outcome of participation in leisure pursuits. They provide opportunities for self-expression and stress reduction, as well as an environment in which people can socialize. Leisure activities, specifically sport activities, can play a significant role in young people's identity development. This paper explores the leisure activities in which young people in Adelaide, Australia participate. It examines the role of leisure activities in terms of young people's identity and feelings towards their hometown. This study consisted of semi-structured focus groups conducted with 24 senior high school students, followed by a survey resulting in 226 useable responses. Respondents were aged between 16 and 18 years of age. From the range of activities identified and explored, the results revealed sports activities to have the greatest impact on young people's lives. The results demonstrated that frequency of participation has a significant effect on young people's involvement levels and how they identify with the activity

Urine patch detection using LiDAR and RPAS/UAV produced photogrammetry

In grazed dairy pastures, the largest N source for both nitrate (NO3-) leaching and nitrous oxide (N2O) emissions is urine-N excreted by the animals. Additional application of N on urine patches as fertilizer may increase these losses so adapting N-fertilisation in these areas is necessary. The objective of this study was to examine the use of a tractor mounted LiDAR (Light Detection and Ranging) system to accurately identify and quantify areas affect by excess N, such as urine and dung. To do so, a controlled experiment was designed in a paddock with no recent exposure to animals or N fertilisation. Synthetic urine was randomly applied within two 20m x 20m blocks and weekly LiDAR scans were taken for 5 weeks. LiDAR based contour maps of the pasture canopy were shown to accurately detect the asymmetric urine patches as well as calculate a percent area of urine based high N as early as one week after a simulated grazing event. Further, weekly flights were taken with a remotely piloted aircraft system (RPAS/UAV) to have aerial footage of the trial. Resulting mosaic of RGB and NIR images were used to create photogrammetric based contour maps. Both approaches (LiDAR and photogrammetry) show no significant difference in the identification and sizing of urine patch cluster

Electrochemical micromachining: An Introduction

Copyright © 2016 The Author(s). Electrochemical machining (ECM) is a relatively new technique, only being introduced as a commercial technique within the last 70 years (1). A lot of research was conducted in the 1960s and 1970s but research on electrical discharge machining (EDM) around the same time slowed ECM research (2). The main influence for the development of ECM came from the aerospace industry where very hard alloys were required to be machined without leaving a defective layer in order to produce a component which would behave reliably (3). ECM was primarily used for the production of gas turbine blades (2) or to machine materials into complex shapes that would be difficult to machine using conventional machining methods (4). Tool wear is high and the metal removal rate is slow when machining hard materials with conventional machining methods such as milling. This increases the cost of the machining process overall and this method creates a defective layer on the machined surface (3). Whereas with ECM there is virtually no tool wear even when machining hard materials and it does not leave a defective layer on the machined surface. This paper reviews the application of electrochemical machining with regards to micro-manufacturing and present state of the art micro ECM considering different machined materials, electrolytes and conditions used.The research reported in this article was supported by the European Commission within the project ‘Minimizing Defects in Micro-Manufacturing Applications (MIDEMMA)’ (FP7-2011-NMP-ICT-FoF-285614)

The kinematic footprints of five stellar streams in Andromeda's halo

(abridged) We present a spectroscopic analysis of five stellar streams (`A', `B', `Cr', `Cp' and `D') as well as the extended star cluster, EC4, which lies within streamC, all discovered in the halo of M31 from our CFHT/MegaCam survey. These spectroscopic results were initially serendipitous, making use of our existing observations from the DEep Imaging Multi-Object Spectrograph mounted on the Keck II telescope, and thereby emphasizing the ubiquity of tidal streams that account for ~70% of the M31 halo stars in the targeted fields. Subsequent spectroscopy was then procured in streamCr/p and streamD to trace the velocity gradient along the streams. For the cluster EC4, candidate member stars with average [Fe/H]~-1.4 (Fe/H_spec=-1.6), are found at v_{hel}=-285 km/s suggesting it could be related to streamCp. No similarly obvious cold kinematic candidate is found for streamD, although candidates are proposed in both of two spectroscopic pointings along the stream (both at -400 km/s). Spectroscopy near the edge of streamB suggests a likely kinematic detection, while a candidate kinematic detection of streamA is found (plausibly associated to M33 rather than M31). The low dispersion of the streams in kinematics, physical thickness, and metallicity makes it hard to reconcile with a scenario whereby these stream structures as an ensemble are related to the giant southern stream. We conclude that the M31 stellar halo is largely made up of multiple kinematically cold streams.Comment: 19 pages, 12 figures, accepted in MNRAS. High resolution version, with fig10 here: http://www.ast.cam.ac.uk/~schapman/streams.pd

Catalyst Interface Engineering for Improved 2D Film Lift-Off and Transfer

The mechanisms by which chemical vapor deposited (CVD) graphene and hexagonal boron nitride (h-BN) films can be released from a growth catalyst, such as widely used copper (Cu) foil, are systematically explored as a basis for an improved lift-off transfer. We show how intercalation processes allow the local Cu oxidation at the interface followed by selective oxide dissolution, which gently releases the 2D material (2DM) film. Interfacial composition change and selective dissolution can thereby be achieved in a single step or split into two individual process steps. We demonstrate that this method is not only highly versatile but also yields graphene and h-BN films of high quality regarding surface contamination, layer coherence, defects, and electronic properties, without requiring additional post-transfer annealing. We highlight how such transfers rely on targeted corrosion at the catalyst interface and discuss this in context of the wider CVD growth and 2DM transfer literature, thereby fostering an improved general understanding of widely used transfer processes, which is essential to numerous other applications.We acknowledge funding from the ERC (InsituNANO, grant 279342). R.W. acknowledges an EPSRC Doctoral Training Award (EP/M506485/1). During this work, S.T. was supported in parts by a DFG research fellowship under grant TA 1122/1-1:1. J.A.A.-W. acknowledges a Research Fellowship from Churchill College, Cambridge. Z.A.V.V. acknowledges funding from ESPRC grant EP/L016087/1. P.B. and B.S.J. thank the Danish National Research Foundation Centre for Nanostructured graphene, DNRF103, and EU Horizon 2020 “Graphene Flagship” 696656. T.J.B. and P.R.W. acknowledge financial support from EU FP7-6040007 “GLADIATOR” and Innovation Fund Denmark Da-Gate 0603-005668B. P.R.K. acknowledges a Lindemann Trust Fellowship

Dynamics in the satellite system of Triangulum: Is AndXXII a dwarf satellite of M33?

We present results from a spectroscopic survey of the dwarf spheroidal And XXII and the two extended clusters EC1 and EC2. These three objects are candidate satellites of the Triangulum galaxy, M33, which itself is likely a satellite of M31. We use the DEep Imaging Multi-Object Spectrograph mounted on the Keck-II telescope to derive radial velocities for candidate member stars of these objects and thereby identify the stars that are most likely actual members. Eleven most probable stellar members (of 13 candidates) are found for AndXXII. We obtain an upper limit of sigma_v < 6.0 km s-1 for the velocity dispersion of AndXXII, [Fe/H] ~ -1.6 for its metallicity, and 255pc for the Plummer radius of its projected density profile. We construct a colour magnitude diagram for AndXXII and identify both the red giant branch and the horizontal branch. The position of the latter is used to derive a heliocentric distance to And XXII of 853 pm 26 kpc. The combination of the radial velocity, distance, and angular position of AndXXII indicates that it is a strong candidate for being the first known satellite of M33 and one of the very few examples of a galactic satellite of a satellite. N-body simulations imply that this conclusion is unchanged even if M31 and M33 had a strong encounter in the past few Gyr. We test the hypothesis that the extended clusters highlight tidally stripped galaxies by searching for an excess cloud of halo-like stars in their vicinity. We find such a cloud for the case of EC1 but not EC2. The three objects imply a dynamical mass for M33 that is consistent with previous estimates.Comment: 14 pages, 14 figures, revised for MNRAS publicatio

Exclusion zones for variable rate nitrogen fertilisation in grazed dairy pasture systems in New Zealand

To assess the variability of total soil nitrogen (TN) on grazed and irrigated pastures, TN was quantified from spatially distinct “areas” within the paddock (irrigated and non-irrigated areas, around the gates, and around the troughs) on two dairy farms located in Canterbury, New Zealand. During soil sampling, each area was sub-divided and multiple soil samples were taken to ensure adequate spatial representation of each area. The results showed there were no differences in TN between the farms, but differences were detected between the paddocks (P< 0.001), largely due to the significant interaction between the areas (gates and troughs) in different paddocks (P< 0.001). The greatest variability in TN was around the gates, due to either much higher or lower TN near the entrance of the gates. The TN levels returned to concentrations that were similar to those in the surrounding pasture after 4 m distance from the gates. This study shows while TN concentrations are relatively consistent spatially within pastures, there is high variability in TN in proximity to some farm infrastructure, such as gates and troughs