Coherent beam combining of high power quasi continuous wave tapered amplifiers

International audienceWe demonstrate coherent beam combining of four high brightness tapered amplifiers in pulsed, quasi continuous wave (QCW) operation, seeded by a 976 nm laser diode. The maximum power of 22.7 W was achieved with > 64 % combining efficiency in a close to diffraction limited beam. We discuss turn-on dynamics of tapered amplifiers operated in pulsed mode in detail

Argentina. Sello Alimentos Argentinos

Resumen Alimentos Argentinos es un sello de calidad que distingue los alimentos argentinos y sus atributos diferenciadores –proceso, producto y envase-. Es gratuito, temporal, voluntario y puede ser solicitado por productores y/o elaboradores de alimentos, que cumplan con el Protocolo correspondiente. El cumplimiento a dichos protocolos es auditado por terceros independientes, habilitados para tal fin.Fil: Pighin, Darío Gabriel. Instituto Nacional de Tecnología Agropecuaria (INTA). CIA. Instituto Tecnología de Alimentos; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET); Argentina. Universidad de Morón; Argentina.Fil: Tam, C. Ministerio de Producción y Trabajo. Secretaría de Gobierno de Agroindustria; Argentina.Fil: Pazos, Adriana Alejandra. Instituto Nacional de Tecnología Agropecuaria (INTA). CIA. Instituto Tecnología de Alimentos; Argentina. Universidad de Morón; Argentina.Fil: Barcus, M. C. Ministerio de Producción y Trabajo. Secretaría de Gobierno de Agroindustria; Argentina.Fil: Moron, J. M. Ministerio de Producción y Trabajo. Secretaría de Gobierno de Agroindustria; Argentina.Fil: Moron, P. H. Ministerio de Producción y Trabajo. Secretaría de Gobierno de Agroindustria; Argentina.Fil: Nimo, M. Ministerio de Producción y Trabajo. Secretaría de Gobierno de Agroindustria; Argentina.Fil: Grigioni, Gabriela Maria. Instituto Nacional de Tecnología Agropecuaria (INTA). CIA. Instituto Tecnología de Alimentos; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET); Argentina. Universidad de Morón; Argentina

Measurement of shower development and its Moli\`ere radius with a four-plane LumiCal test set-up

A prototype of a luminometer, designed for a future e+e- collider detector, and consisting at present of a four-plane module, was tested in the CERN PS accelerator T9 beam. The objective of this beam test was to demonstrate a multi-plane tungsten/silicon operation, to study the development of the electromagnetic shower and to compare it with MC simulations. The Moli\`ere radius has been determined to be 24.0 +/- 0.6 (stat.) +/- 1.5 (syst.) mm using a parametrization of the shower shape. Very good agreement was found between data and a detailed Geant4 simulation.Comment: Paper published in Eur. Phys. J., includes 25 figures and 3 Table

ECFA Detector R&D Panel, Review Report

Two special calorimeters are foreseen for the instrumentation of the very forward region of an ILC or CLIC detector; a luminometer (LumiCal) designed to measure the rate of low angle Bhabha scattering events with a precision better than 10$^{-3}$ at the ILC and 10$^{-2}$ at CLIC, and a low polar-angle calorimeter (BeamCal). The latter will be hit by a large amount of beamstrahlung remnants. The intensity and the spatial shape of these depositions will provide a fast luminosity estimate, as well as determination of beam parameters. The sensors of this calorimeter must be radiation-hard. Both devices will improve the e.m. hermeticity of the detector in the search for new particles. Finely segmented and very compact electromagnetic calorimeters will match these requirements. Due to the high occupancy, fast front-end electronics will be needed. Monte Carlo studies were performed to investigate the impact of beam-beam interactions and physics background processes on the luminosity measurement, and of beamstrahlung on the performance of BeamCal, as well as to optimise the design of both calorimeters. Dedicated sensors, front-end and ADC ASICs have been designed for the ILC and prototypes are available. Prototypes of sensor planes fully assembled with readout electronics have been studied in electron beams.Comment: 61 pages, 51 figure

Performance of fully instrumented detector planes of the forward calorimeter of a Linear Collider detector

Detector-plane prototypes of the very forward calorimetry of a future detector at an e+e- collider have been built and their performance was measured in an electron beam. The detector plane comprises silicon or GaAs pad sensors, dedicated front-end and ADC ASICs, and an FPGA for data concentration. Measurements of the signal-to-noise ratio and the response as a function of the position of the sensor are presented. A deconvolution method is successfully applied, and a comparison of the measured shower shape as a function of the absorber depth with a Monte-Carlo simulation is given.Comment: 25 pages, 32 figures, revised version following comments from referee

Observation of two new Ξb−\Xi_b^- baryon resonances

Two structures are observed close to the kinematic threshold in the $\Xi_b^0 \pi^-$ mass spectrum in a sample of proton-proton collision data, corresponding to an integrated luminosity of 3.0 fb$^{-1}$ recorded by the LHCb experiment. In the quark model, two baryonic resonances with quark content $bds$ are expected in this mass region: the spin-parity $J^P = \frac{1}{2}^+$ and $J^P=\frac{3}{2}^+$ states, denoted $\Xi_b^{\prime -}$ and $\Xi_b^{*-}$. Interpreting the structures as these resonances, we measure the mass differences and the width of the heavier state to be $m(\Xi_b^{\prime -}) - m(\Xi_b^0) - m(\pi^{-}) = 3.653 \pm 0.018 \pm 0.006$ MeV$/c^2$, $m(\Xi_b^{*-}) - m(\Xi_b^0) - m(\pi^{-}) = 23.96 \pm 0.12 \pm 0.06$ MeV$/c^2$, $\Gamma(\Xi_b^{*-}) = 1.65 \pm 0.31 \pm 0.10$ MeV, where the first and second uncertainties are statistical and systematic, respectively. The width of the lighter state is consistent with zero, and we place an upper limit of $\Gamma(\Xi_b^{\prime -}) < 0.08$ MeV at 95% confidence level. Relative production rates of these states are also reported.Comment: 17 pages, 2 figure

Measurement of the Bs0→J/ψηB_{s}^{0} \rightarrow J/\psi \eta lifetime

Using a data set corresponding to an integrated luminosity of $3 fb^{-1}$, collected by the LHCb experiment in $pp$ collisions at centre-of-mass energies of 7 and 8 TeV, the effective lifetime in the $B^0_s \rightarrow J/\psi \eta$ decay mode, $\tau_{\textrm{eff}}$, is measured to be $\tau_{\textrm{eff}} = 1.479 \pm 0.034~\textrm{(stat)} \pm 0.011 ~\textrm{(syst)}$ ps. Assuming $CP$ conservation, $\tau_{\textrm{eff}}$ corresponds to the lifetime of the light $B_s^0$ mass eigenstate. This is the first measurement of the effective lifetime in this decay mode.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2016-017.htm

Measurement of the mass and lifetime of the Ωb−\Omega_b^- baryon

A proton-proton collision data sample, corresponding to an integrated luminosity of 3 fb$^{-1}$ collected by LHCb at $\sqrt{s}=7$ and 8 TeV, is used to reconstruct $63\pm9$ $\Omega_b^-\to\Omega_c^0\pi^-$, $\Omega_c^0\to pK^-K^-\pi^+$ decays. Using the $\Xi_b^-\to\Xi_c^0\pi^-$, $\Xi_c^0\to pK^-K^-\pi^+$ decay mode for calibration, the lifetime ratio and absolute lifetime of the $\Omega_b^-$ baryon are measured to be \begin{align*} \frac{\tau_{\Omega_b^-}}{\tau_{\Xi_b^-}} &= 1.11\pm0.16\pm0.03, \\ \tau_{\Omega_b^-} &= 1.78\pm0.26\pm0.05\pm0.06~{\rm ps}, \end{align*} where the uncertainties are statistical, systematic and from the calibration mode (for $\tau_{\Omega_b^-}$ only). A measurement is also made of the mass difference, $m_{\Omega_b^-}-m_{\Xi_b^-}$, and the corresponding $\Omega_b^-$ mass, which yields \begin{align*} m_{\Omega_b^-}-m_{\Xi_b^-} &= 247.4\pm3.2\pm0.5~{\rm MeV}/c^2, \\ m_{\Omega_b^-} &= 6045.1\pm3.2\pm 0.5\pm0.6~{\rm MeV}/c^2. \end{align*} These results are consistent with previous measurements.Comment: 11 pages, 5 figures, All figures and tables, along with any supplementary material and additional information, are available at https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2016-008.htm

Observation of J/ψpJ/\psi p resonances consistent with pentaquark states in Λb0→J/ψK−p{\Lambda_b^0\to J/\psi K^-p} decays

Observations of exotic structures in the $J/\psi p$ channel, that we refer to as pentaquark-charmonium states, in $\Lambda_b^0\to J/\psi K^- p$ decays are presented. The data sample corresponds to an integrated luminosity of 3/fb acquired with the LHCb detector from 7 and 8 TeV pp collisions. An amplitude analysis is performed on the three-body final-state that reproduces the two-body mass and angular distributions. To obtain a satisfactory fit of the structures seen in the $J/\psi p$ mass spectrum, it is necessary to include two Breit-Wigner amplitudes that each describe a resonant state. The significance of each of these resonances is more than 9 standard deviations. One has a mass of $4380\pm 8\pm 29$ MeV and a width of $205\pm 18\pm 86$ MeV, while the second is narrower, with a mass of $4449.8\pm 1.7\pm 2.5$ MeV and a width of $39\pm 5\pm 19$ MeV. The preferred $J^P$ assignments are of opposite parity, with one state having spin 3/2 and the other 5/2.Comment: 48 pages, 18 figures including the supplementary material, v2 after referee's comments, now 19 figure