107 research outputs found
Thermal performance and comfort condition analysis in a vernacular building with a glazed balcony
The increase in global environmental problems requires more environmentally efficient construction. Vernacular passive strategies can play an important role in helping reducing energy use and CO2 emissions related to buildings. This paper studies the use of glazed balconies in the North of Portugal as a strategy to capture solar gains and reduce heat losses. The purpose is understanding thermal performance and comfort conditions provided by this passive heating strategy. The methodology includes objective (short and long-term monitoring), to evaluate the different parameters affecting thermal comfort and air quality, and subjective assessments to assess occupants? perception regarding thermal sensation. The results show that the use of glazed balconies as a passive heating strategy in a climate with cold winters is viable. During the mid-seasons, the rooms with balcony have adequate comfort conditions. In the heating season, it is possible to achieve comfort conditions in sunny days while in the cooling season there is a risk of overheating. Regarding indoor air quality, carbon dioxide concentrations were low, but the average radon concentration measured was high when the building was unoccupied, rapidly decreasing to acceptable values, during occupation periods when a minimum ventilation rate was promoted. Occupants? actions were essential to improving building behavior.The authors would like to acknowledge the support granted by the FEDER funds through the Competitively and Internationalization Operational Programme (POCI) and by national funds through FCT (Foundation for Science and Technology) within the scope of the project with the reference POCI-01-0145-FEDER-029328, and of the Ph.D. grant with the reference PD/BD/113641/2015, that were fundamental for the development of this study
Deuterium retention in tin (Sn) and lithium–tin (Li–Sn) samples exposed to ISTTOK plasmas
The use of lithium (Li) or tin (Sn) as a liquid metal plasma facing component is proposed as a solution to the high power load issue on the divertor region of nuclear fusion reactors. The possibility to use these materials depends on their compatibility with hydrogen plasmas. With the purpose of realizing deuterium retention studies, specimens of pure Sn (99.999% Sn) and Li–Sn alloy (30 at.% Li) were exposed in the ISTTOK edge plasma. Ex situ analysis of the samples was performed by means of ion beam diagnostics. Nuclear reaction analysis (NRA) technique was applied using the D(3He,p)4He reaction to quantify the fuel retention on the samples.In this work the deuterium retention is compared between pure Sn and Li–Sn alloy samples in both liquid and solid states. All the samples were found to have retention ratios smaller than 0.1 at.%. This low retention ratio is expected for pure tin given its high mass and the instability of tin hydrides. However the retention was unexpectedly low for the case of Li–Sn which was thought to be dominated by the lithium fraction in the alloy. These results suggest that tin has a role in the retention mechanism in this material. Keywords: Liquid metals, Plasma-surface interaction, Lithium, Tin, Deuterium retention, Tokamak ISTTO
Microstructure characterization of ODS-RAFM steels
Results of the microstructural characterization of four different RAFM ODS Eurofer 97 batches are presented and discussed. Analyses and observations were performed by nuclear microprobe and scanning and transmission electron microscopy. X-ray elemental distribution maps obtained with proton beam scans showed homogeneous composition within the proton beam spatial resolution and, in particular, pointed to a uniform distribution of ODS (yttria) nanoparticles in the Eurofer 97 matrix. This was confirmed by transmission electron microscopy. Scanning electron microscopy coupled with energy dispersive spectroscopy made evident the presence of chromium carbide precipitation. Precipitates occurred preferentially along grain boundaries (GB) in three of the batches and presented a discrete distribution in the other, as a result of different thermo-mechanical routes. Additional electron backscattered diffraction experiments revealed the crystalline textures in the ferritic polycrystalline structure of the ODS steel samples
Microstructure characterization of ODS-RAFM steels
Results of the microstructural characterization of four different RAFM ODS Eurofer 97 batches are presented and discussed. Analyses and observations were performed by nuclear microprobe and scanning and transmission electron microscopy. X-ray elemental distribution maps obtained with proton beam scans showed homogeneous composition within the proton beam spatial resolution and, in particular, pointed to a uniform distribution of ODS (yttria) nanoparticles in the Eurofer 97 matrix. This was confirmed by transmission electron microscopy. Scanning electron microscopy coupled with energy dispersive spectroscopy made evident the presence of chromium carbide precipitation. Precipitates occurred preferentially along grain boundaries (GB) in three of the batches and presented a discrete distribution in the other, as a result of different thermo-mechanical routes. Additional electron backscattered diffraction experiments revealed the crystalline textures in the ferritic polycrystalline structure of the ODS steel samples
Stellar population analysis on local infrared-selected galaxies
To study the stellar population of local infrared galaxies, which contain
star-forming galaxies, composite galaxies, LINERs, and Seyfert 2s. We also want
to find whether infrared luminosity and spectral class have any effects on
their stellar populations. The sample galaxies are selected from the main
galaxy sample of SDSS-DR4 and then cross-correlated with the IRAS-PSCz catalog.
We fit our spectra (stellar absorption lines and continua) using the spectral
synthesis code STARLIGHT on the base of the templates of Simple Stellar
Population and the spectra of star clusters.Among the 4 spectral classes,
LINERs present the oldest stellar populations, and the other 3 sub-samples all
present substantial young and intermediate age populations and very few old
populations. The importance of young populations decreases from star-forming,
composite, Seyfert 2 to LINER. As to different infrared luminosity bins, ULIGs
& LIGs (log(11) present younger populations than
starbursts and normal galaxies. However, the dominant contributors to mass are
old populations in all sample galaxies. The fittings by using the spectra of
star clusters with different ages and metallicities as templates also give
consistent results. The dominated populations in star-forming and composite
galaxies are those with metallicity , while LINERs and Seyfert 2s
are more metal-rich. The normal galaxies are more metal-rich than the ULIGs &
LIGs and starbursts for the star-forming galaxies within different infrared
luminosity bins. Additionally, we also compare some synthesis results with
other parameters obtained from the MPA/JHU catalog.Comment: 13 pages, 11 figures, accepted for publication by A&
Black hole masses and starbursts in X-shaped radio sources
It has been suggested that the X-shaped morphology observed in some radio
sources can reflect either a recent merger of two supermassive black holes
(SMBHs) or the presence of a second active black hole in the galactic nucleus.
These scenarios are tested by studying the relationship between the black hole
mass, radio and optical luminosity, starburst history, and dynamic age of radio
lobes in a sample of 29 X-shaped radio galaxies drawn from a list of 100
X-shaped radio source candidates identified from the FIRST survey. The same
relationships are also studied in a control sample consisting of 36 radio-loud
active nuclei with similar redshifts and optical and radio luminosities. The
X-shaped objects are found to have statistically higher black hole masses and
older starburst activity compared to the objects from the control sample.
Implications of these findings are discussed for the black hole merger scenario
and for the potential presence of active secondary black holes in post-merger
galaxies.Comment: 11 pages, 8 figure
Comparing six evolutionary population synthesis models through spectral synthesis on galaxies
We compare six popularly used evolutionary population synthesis (EPS) models
(BC03, CB07, Ma05, GALEV, GRASIL, Vazdekis/Miles) through fitting the full
optical spectra of six representative types of galaxies (star-forming and
composite galaxies, Seyfert 2s, LINERs, E+A and early-type galaxies), which are
taken from the Sloan Digital Sky Survey (SDSS). Throughout our paper, we use
the simple stellar populations (SSPs) from each EPS model and the software
STARLIGHT to do our fits. Our main results are: Using different EPS models the
resulted numerical values of contributed light fractions change obviously, even
though the dominant populations are consistent. The stellar population
synthesis does depend on the selection of age and metallicity, while it does
not depend on the stellar evolution track much. The importance of young
populations decreases from star-forming, composite, Seyfert 2, LINER to
early-type galaxies, and E+A galaxies lie between composite galaxies and
Seyfert 2s in most cases. We conclude that different EPS models do derive
different stellar populations, so that it is not reasonable to directly compare
stellar populations estimated from different EPS models. To get reliable
results, we should use the same EPS model for the compared samples.Comment: 13 pages, 4 figures, accepted for publication in A&
Star-forming galaxies in SDSS: signs of metallicity evolution
Evolution of galaxies through cosmic time has been widely studied at high
redshift, but there are a few studies in this field at lower redshifts.
However, low-redshifts studies will provide important clues to the evolution of
galaxies, furnishing the required link between local and high-redshift
universe. In this work we focus on the metallicity of the gas in spiral
galaxies at low redshift looking for signs of chemical evolution. We analyze
the metallicity contents of star forming galaxies of similar luminosities at
different redshifts, we studied the metallicity of star forming galaxies from
SDSS-DR5 (Sloan Digital Sky Survey-Data Release 5), using different redshift
intervals from 0.1 to 0.4. We used the public data of SDSS-DR5 processed with
the STARLIGHT spectral synthesis code, correcting the fluxes for dust
extinction, estimating metallicities using the R23 method, and analyzing the
samples with respect to the [NII]6583/[OII]3727 line ratio. From a final sample
of 207 galaxies, we find a decrement in 12+log(O/H) corresponding to the
redshift interval 0.3 < z < 0.4 of ~0.1 dex with respect to the rest of the
sample, which can be interpreted as evidence of the metallicity evolution in
low-z galaxies.Comment: 4 pages, 3 figure
The star formation histories of red and blue low surface brightness disk galaxies
We study the star formation histories (SFH) and stellar populations of 213
red and 226 blue nearly face-on low surface brightness disk galaxies (LSBGs),
which are selected from the main galaxy sample of Sloan Digital Sky Survey
(SDSS) Data Release Seven (DR7). We also want to compare the stellar
populations and SFH between the two groups. The sample of both red and blue
LSBGs have sufficient signal-to-noise ratio in the spectral continua. We obtain
their absorption-line indices (e.g. Mg_2, H\delta_A), D_n(4000) and stellar
masses from the MPA/JHU catalogs to study their stellar populations and SFH.
Moreover we fit their optical spectra (stellar absorption lines and continua)
by using the spectral synthesis code STARLIGHT on the basis of the templates of
Simple Stellar Populations (SSPs). We find that red LSBGs tend to be relatively
older, higher metallicity, more massive and have higher surface mass density
than blue LSBGs. The D_n(4000)-H\delta_A plane shows that perhaps red and blue
LSBGs have different SFH: blue LSBGs are more likely to be experiencing a
sporadic star formation events at the present day, whereas red LSBGs are more
likely to form stars continuously over the past 1-2 Gyr. Moreover, the fraction
of galaxies that experienced recent sporadic formation events decreases with
increasing stellar mass. Furthermore, two sub-samples are defined for both red
and blue LSBGs: the sub-sample within the same stellar mass range of 9.5 <=
log(M_\star/M_\odot) <= 10.3, and the surface brightness limiting sub-sample
with \mu_0(R) <= 20.7 mag arcsec^{-2}. They show consistent results with the
total sample in the corresponding relationships, which confirm that our results
to compare the blue and red LSBGs are robust.Comment: 9 pages, 7 figures, 2 tables, Accepted for publication in A&
- …