The Effect of Iron Impurities on Transition Metal Catalysts for the Oxygen Evolution Reaction in Alkaline Environment: Activity Mediators or Active Sites?

There is an ongoing debate on elucidating the actual role of Fe impurities in alkaline water electrolysis, acting either as reactivity mediators or as co-catalysts through synergistic interaction with the main catalyst material. This perspective summarizes the most prominent oxygen evolution reaction (OER) mechanisms mostly for Ni-based oxides as model transition metal catalysts and highlights the effect of Fe incorporation on the catalyst surface in the form of impurities originating from the electrolyte or co-precipitated in the catalyst lattice, in modulating the OER reaction kinetics, mechanism and stabilit

What Controls Activity Trends of Electrocatalytic Hydrogen Evolution Reaction?-Activation Energy Versus Frequency Factor

Renewable energy storage via water electrolysis strongly depends on the design of electrified electrode–electrolyte interfaces at which electricity is converted into chemical energy. At the core of the hydrogen evolution reaction (HER) and the oxygen evolution reaction conversion efficiency are interfacial processes with complex dynamic mechanisms, whose further acceleration is practically impossible without a thorough fundamental understanding of electrocatalysis. Here, we communicate new experimental insights into HER, which will potentially further deepen our general understanding of electrocatalysis. Of special note is the very surprising observation that the most active metals (i.e., noble metals) for HER, which exhibit the lowest overpotentials at a defined current density, exhibit the highest activation energies in comparison to the other metals from the d-block. This suggests a major, if not dominant, impact of the frequency factor on activity trends and the need for deeper reconsideration of the origins of electrocatalytic activity

Electrocatalysis Beyond 2020: How to Tune the Preexponential Frequency Factor

After a century of research on electrocatalytic reactions, a universal theory of electrocatalysis is still not established due to limited understanding of complex energy conversion processes at electrified electrode-electrolyte interfaces. Most of the research efforts directed toward the acceleration of important electrocatalytic reactions (e. g. hydrogen evolution reaction) were in the direction of minimizing activation energy by tuning the adsorption energies of key intermediates. This kind of approach is well-established and, importantly, in some cases it was valuable by predicting the design of electrocatalysts with advanced properties. However, in some very important research endeavors, advancement in performance of newly designed electrocatalysts could not be attributed to altered/minimized activation energy. Important to note is that modern electrocatalysis almost completely disregards influence of the preexponential factor on reaction rate. In this work, we open some important questions relevant for future of electrocatalysis and electrochemical energy conversion, with special focus on preexponential factor as major contributor to electrocatalytic reaction rate

Atomically dispersed Pt-N-4 sites as efficient and selective electrocatalysts for the chlorine evolution reaction

Chlorine evolution reaction (CER) is a critical anode reaction in chlor-alkali electrolysis. Although precious metal-based mixed metal oxides (MMOs) have been widely used as CER catalysts, they suffer from the concomitant generation of oxygen during the CER. Herein, we demonstrate that atomically dispersed Pt-N-4 sites doped on a carbon nanotube (Pt-1/CNT) can catalyse the CER with excellent activity and selectivity. The Pt-1/CNT catalyst shows superior CER activity to a Pt nanoparticle-based catalyst and a commercial Ru/Ir-based MMO catalyst. Notably, Pt-1/CNT exhibits near 100% CER selectivity even in acidic media, with low Cl- concentrations (0.1M), as well as in neutral media, whereas the MMO catalyst shows substantially lower CER selectivity. In situ electrochemical X-ray absorption spectroscopy reveals the direct adsorption of Cl- on Pt-N-4 sites during the CER. Density functional theory calculations suggest the PtN4C12 site as the most plausible active site structure for the CER

Self-optimizing, highly surface-active layered metal dichalcogenide catalysts for hydrogen evolution

Low-cost, layered transition-metal dichalcogenides (MX_2) based on molybdenum and tungsten have attracted substantial interest as alternative catalysts for the hydrogen evolution reaction (HER). These materials have high intrinsic per-site HER activity; however, a significant challenge is the limited density of active sites, which are concentrated at the layer edges. Here we unravel electronic factors underlying catalytic activity on MX_2 surfaces, and leverage the understanding to report group-5 MX_2 (H-TaS_2 and H-NbS_2) electrocatalysts whose performance instead mainly derives from highly active basal-plane sites, as suggested by our first-principles calculations and performance comparisons with edge-active counterparts. Beyond high catalytic activity, they are found to exhibit an unusual ability to optimize their morphology for enhanced charge transfer and accessibility of active sites as the HER proceeds, offering a practical advantage for scalable processing. The catalysts reach 10 mA cm^(−2) current density at an overpotential of ∼50–60 mV with a loading of 10–55 μg cm^(−2), surpassing other reported MX2 candidates without any performance-enhancing additives

In-situ local phase-transitioned MoSe2 in La0.5Sr0.5CoO3-?? heterostructure and stable overall water electrolysis over 1000 hours

Developing efficient bifunctional catalysts for overall water splitting that are earth-abundant, cost-effective, and durable is of considerable importance from the practical perspective to mitigate the issues associated with precious metal-based catalysts. Herein, we introduce a heterostructure comprising perovskite oxides (La0.5Sr0.5CoO3?????) and molybdenum diselenide (MoSe2) as an electrochemical catalyst for overall water electrolysis. Interestingly, formation of the heterostructure of La0.5Sr0.5CoO3????? and MoSe2 induces a local phase transition in MoSe2, 2???H to 1???T phase, and more electrophilic La0.5Sr0.5CoO3????? with partial oxidation of the Co cation owing to electron transfer from Co to Mo. Together with these synergistic effects, the electrochemical activities are significantly improved for both hydrogen and oxygen evolution reactions. In the overall water splitting operation, the heterostructure showed excellent stability at the high current density of 100???mA???cm???2 over 1,000???h, which is exceptionally better than the stability of the state-of-the-art platinum and iridium oxide couple

The Role of TiO2 Doping on RuO2-Coated Electrodes for the Water Oxidation Reaction

Electrochemical water splitting into H2 and O2 presents a significant and challenging energy loss due to the high overpotential required at the anode. Today, in industrially relevant applications, dimensionally stable anodes (DSA) based on the electrocatalytic active RuO2 are conventionally utilized. To enhance the resistance against corrosion, incorporation of TiO2 in the RuO2-coated electrodes is widely employed. In the present work we have used scanning electrochemical microscopy (SECM) to demonstrate that TiO2-doped RuO2-coated electrodes, in addition to being more durable, also show an electrocatalytic activity that is, on average, 13% higher as compared to the pure RuO2-coated electrodes. We also demonstrate that cracks in the pure RuO2 coating are the most active zones, probably because Ti from the Ti support has diffused into the first applied layer of the RuO2 coating. To reveal the nature of this enhanced activity for water oxidation displayed on TiO2-doped RuO2 electrodes, we have employed X-ray photoelectron spectroscopy (XPS) for material characterization. The results show that the electrocatalytic activity enhancement displayed on the mixed (Ru1–x:Tix)O2 coating is promoted through a charge transfer from the RuO2 to the TiO2, which provides new and more reactive sites designated as activated RuO2δ+.This study has partly been carried out in the framework of the European Commission FP7 Initial Training Network “ELCAT”, Grant Agreement No. 214936-2. Portions of this research were performed at SPring-8 with the approval of Japan Synchrotron Radiation Research Institute as Nanotechnology Support Project of the Ministry of Education, Culture, Sports, Science and Technology (Proposal No. 2007A2005 and 2008A1671/BL-47XU)

Electrospinning as a route to advanced carbon fibre materials for selected low-temperature electrochemical devices: a review

Electrospinning has been proven as a highly versatile fabrication method for producing nano-structured fibres with controllable morphology, of both the fibres themselves and the void structure of the mats. Additionally, it is possible to use heteroatom doped polymers or to include catalytic precursors in the electrospinning solution to control the surface properties of the fibres. These factors make it an ideal method for the production of electrodes and flow media for a variety of electrochemical devices, enabling reduction in mass transport and activation overpotentials and therefore increasing efficiency. Moreover, the use of biomass as a polymer source has recently gained attention for the ability to embed sustainable principles in the materials of electrochemical devices, complementing their ability to allow an increase in the use of renewable electricity via their application. In this review, the historical and recent developments of electrospun materials for application in redox flow batteries, fuel cells, metal air batteries and supercapacitors are thoroughly reviewed, including an overview of the electrospinning process and a guide to best practice. Finally, we provide an outlook for the emerging use of this process in the field of electrochemical energy devices with the hope that the combination of tailored microstructure, surface functionality and computer modelling will herald a new era of bespoke functional materials that can significantly improve the performance of the devices in which they are used