Comparison of the scientific performance in hip and knee arthroplasty between the leading continents

Background: Scientific progress in the field of knee and hip arthroplasty has enabled the preservation of mobility and quality of life in the case of patients with many primary degenerative and (post-) traumatic joint diseases. This comparative study aims to investigate differences in scientific performance between the leading continents in the field of hip and knee arthroplasty. Methods: Using specific search terms all studies published by the scientific leading continents Europe, North America, Asia and Oceania listed in the Web of Science databases were included. All identified publications were analysed and comparative conclusions were drawn regarding the qualitative and quantitative scientific merit of each continent. Results: Europe, followed by North America, Asia, and Oceania, had the highest overall number of publications in the field of arthroplasty. Since 2000, there has been a strong increase in knee arthroplasty publication rate, particular pronounced in Asia. Studies performed and published in North America and those on knee arthroplasty received the highest number of fundings. Publications regarding hip arthroplasty achieved the highest average citation rate. In contradistinction to the others, in North America most funding was provided by private agencies. Conclusion: Although Europe showed the highest total number of publications, authors and institutions, arthroplasty research from North America received greater scientific attention and financial support. Measured by citations, publications on hip arthroplasty attained higher scientific interest and studies on knee arthroplasty received higher economic affection

Subgroup analysis of scientific performance in the field of arthroplasty

Introduction: Arthroplasty is the final treatment option for maintaining mobility and quality of life in many primary degenerative and (post-) traumatic joint diseases. Identification of research output and potential deficits for specific subspecialties may be an important measure to achieve long-term improvement of patient care in this field. Methods: Using specific search terms and Boolean operators, all studies published since 1945 to the subgroups of arthroplasty listed in the Web of Science Core Collection were included. All identified publications were analysed according to bibliometric standards, and comparative conclusions were drawn regarding the scientific merit of each subgroup. Results: Most publications investigated the subgroups of septic surgery and materials followed by approach, navigation, aseptic loosening, robotic and enhanced recovery after surgery (ERAS). In the last 5 years, research in the fields of robotic and ERAS achieved the highest relative increase in publications In contrast, research on aseptic loosening has continued to lose interest over the last 5 years. Publications on robotics and materials received the most funding on average while those on aseptic loosening received the least. Most publications originated from USA, Germany, and England, except for research on ERAS in which Denmark stood out. Relatively, publications on aseptic loosening received the most citations, whereas the absolute scientific interest was highest for the topic infection. Discussion: In this bibliometric subgroup analysis, the primary scientific outputs focused on septic complications and materials research in the field of arthroplasty. With decreasing publication output and the least financial support, intensification of research on aseptic loosening is urgently recommended

COVID-19: a catalyst for the digitization of surgical teaching at a German University Hospital

Background: The summer semester 2020, had to be restructured due to the SARS-CoV-2 pandemic and the associated contact restrictions. Here, for the frst time, the established lectures in lecture halls and small group seminars could not be conducted in presence as usual. A possible tool for the implementation of medical teaching, ofers the use of eLearning, online webinars and learning platforms. At present it is unclear how the SARS-CoV-2 pandemic will afect surgical teaching, how digitization will be accepted by students, and how virtual teaching can be expanded in the future. Methods: The teaching, which was previously delivered purely through face-to-face lectures, was completely converted to digital media. For this purpose, all lectures were recorded and were available to students on demand. The seminars were held as a twice a week occurring online webinar. The block internship was also conducted as a daily online webinar and concluded with an online exam at the end. At the end of the semester, a survey of the students was carried out, which was answered by n=192 students with an anonymized questionnaire. The questionnaire inquires about the previous and current experience with eLearning, as well as the possibility of a further development towards a purely digital university. Results: There were n=192 students in the study population. For 88%, the conversion of classes to web-based lectures represented their frst eLearning experience. For 77% of all students, the digitization of teaching led to a change in the way they prepare for class. 73% of the participating students are of the opinion that eLearning lectures should continue to be ofered. 54% of the students felt that eLearning lectures made more sense than face-to-face lectures. A purely virtual university could be imagined by 41% of the students. Conclusion: The conversion of teaching represented the frst contact with eLearning for most students. Overall, the eLearning ofering was experienced as positive. Due to the new teaching structure, the way of learning had already changed during the semester. Based on the new eLearning content, the already existing formats can be further expanded in the future. Nevertheless, it turned out that the practical-surgical contents and skills cannot be adequately represented by purely online ofers; for this, the development of hybrid practice-oriented teaching concepts is necessary

Measurement of the top quark forward-backward production asymmetry and the anomalous chromoelectric and chromomagnetic moments in pp collisions at √s = 13 TeV

Abstract The parton-level top quark (t) forward-backward asymmetry and the anomalous chromoelectric (d̂ t) and chromomagnetic (μ̂ t) moments have been measured using LHC pp collisions at a center-of-mass energy of 13 TeV, collected in the CMS detector in a data sample corresponding to an integrated luminosity of 35.9 fb−1. The linearized variable AFB(1) is used to approximate the asymmetry. Candidate t t ¯ events decaying to a muon or electron and jets in final states with low and high Lorentz boosts are selected and reconstructed using a fit of the kinematic distributions of the decay products to those expected for t t ¯ final states. The values found for the parameters are AFB(1)=0.048−0.087+0.095(stat)−0.029+0.020(syst),μ̂t=−0.024−0.009+0.013(stat)−0.011+0.016(syst), and a limit is placed on the magnitude of | d̂ t| < 0.03 at 95% confidence level. [Figure not available: see fulltext.

Measurement of b jet shapes in proton-proton collisions at root s=5.02 TeV

We present the first study of charged-hadron production associated with jets originating from b quarks in proton-proton collisions at a center-of-mass energy of 5.02 TeV. The data sample used in this study was collected with the CMS detector at the CERN LHC and corresponds to an integrated luminosity of 27.4 pb(-1). To characterize the jet substructure, the differential jet shapes, defined as the normalized transverse momentum distribution of charged hadrons as a function of angular distance from the jet axis, are measured for b jets. In addition to the jet shapes, the per-jet yields of charged particles associated with b jets are also quantified, again as a function of the angular distance with respect to the jet axis. Extracted jet shape and particle yield distributions for b jets are compared with results for inclusive jets, as well as with the predictions from the pythia and herwig++ event generators.Peer reviewe

Measurement of the azimuthal anisotropy of Y(1S) and Y(2S) mesons in PbPb collisions at root s(NN)=5.02 TeV

The second-order Fourier coefficients (v(2)) characterizing the azimuthal distributions of Y(1S) and Y(2S) mesons produced in PbPb collisions at root s(NN) = 5.02 TeV are studied. The Y mesons are reconstructed in their dimuon decay channel, as measured by the CMS detector. The collected data set corresponds to an integrated luminosity of 1.7 nb(-1). The scalar product method is used to extract the v2 coefficients of the azimuthal distributions. Results are reported for the rapidity range vertical bar y vertical bar < 2.4, in the transverse momentum interval 0 < pT < 50 GeV/c, and in three centrality ranges of 10-30%, 30-50% and 50-90%. In contrast to the J/psi mesons, the measured v(2) values for the Y mesons are found to be consistent with zero. (C) 2021 The Author(s). Published by Elsevier B.V.Peer reviewe

Combined searches for the production of supersymmetric top quark partners in proton-proton collisions at root s=13 TeV

A combination of searches for top squark pair production using proton-proton collision data at a center-of-mass energy of 13 TeV at the CERN LHC, corresponding to an integrated luminosity of 137 fb(-1) collected by the CMS experiment, is presented. Signatures with at least 2 jets and large missing transverse momentum are categorized into events with 0, 1, or 2 leptons. New results for regions of parameter space where the kinematical properties of top squark pair production and top quark pair production are very similar are presented. Depending on themodel, the combined result excludes a top squarkmass up to 1325 GeV for amassless neutralino, and a neutralinomass up to 700 GeV for a top squarkmass of 1150 GeV. Top squarks with masses from 145 to 295 GeV, for neutralino masses from 0 to 100 GeV, with a mass difference between the top squark and the neutralino in a window of 30 GeV around the mass of the top quark, are excluded for the first time with CMS data. The results of theses searches are also interpreted in an alternative signal model of dark matter production via a spin-0 mediator in association with a top quark pair. Upper limits are set on the cross section for mediator particle masses of up to 420 GeV

MUSiC : a model-unspecific search for new physics in proton-proton collisions at root s=13TeV

Results of the Model Unspecific Search in CMS (MUSiC), using proton-proton collision data recorded at the LHC at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 35.9 fb(-1), are presented. The MUSiC analysis searches for anomalies that could be signatures of physics beyond the standard model. The analysis is based on the comparison of observed data with the standard model prediction, as determined from simulation, in several hundred final states and multiple kinematic distributions. Events containing at least one electron or muon are classified based on their final state topology, and an automated search algorithm surveys the observed data for deviations from the prediction. The sensitivity of the search is validated using multiple methods. No significant deviations from the predictions have been observed. For a wide range of final state topologies, agreement is found between the data and the standard model simulation. This analysis complements dedicated search analyses by significantly expanding the range of final states covered using a model independent approach with the largest data set to date to probe phase space regions beyond the reach of previous general searches.Peer reviewe

Measurement of prompt open-charm production cross sections in proton-proton collisions at root s=13 TeV

The production cross sections for prompt open-charm mesons in proton-proton collisions at a center-of-mass energy of 13TeV are reported. The measurement is performed using a data sample collected by the CMS experiment corresponding to an integrated luminosity of 29 nb(-1). The differential production cross sections of the D*(+/-), D-+/-, and D-0 ((D) over bar (0)) mesons are presented in ranges of transverse momentum and pseudorapidity 4 < p(T) < 100 GeV and vertical bar eta vertical bar < 2.1, respectively. The results are compared to several theoretical calculations and to previous measurements.Peer reviewe

Measurement of B-c(2S)(+) and B-c*(2S)(+) cross section ratios in proton-proton collisions at root s=13 TeV

Peer reviewe