Effect of Pressure-Assisted Heat Treatment on Photoluminescence Emission of α-Bi2O3 Needles

Materials with high photoluminescence (PL) intensity can potentially be used in optical and electronic devices. Although the PL properties of bismuth(III) oxide with a monoclinic crystal structure (α-Bi2O3) have been explored in the past few years, methods of increasing PL emission intensity and information relating PL emission to structural defects are scarce. This research evaluated the effect of a pressure-assisted heat treatment (PAHT) on the PL properties of α-Bi2O3 with a needlelike morphology, which was synthesized via a microwaveassisted hydrothermal (MAH) method. PAHT caused an angular increase between the [BiO6]−[BiO6] clusters of α- Bi2O3, resulting in a significant increase in the PL emission intensity. The Raman and XPS spectra also showed that the α- Bi2O3 PL emissions in the low-energy region (below ∼2.1 eV) are attributed to oxygen vacancies that form defect donor states. The experimental results are in good agreement with first-principles total-energy calculations that were carried out within periodic density functional theory (DFT).This research was funded by The State of Sao Paulo Research Foundation (FAPESP), Research Award No. CEPID 2013/07296-2. Author S. Schmidt is grateful to the Coordination for the Improvement of Higher Education Personnel (Capes) for her doctoral scholarship. This work was also supported by Spanish MALTA-Consolider Ingenio 2010 Program (Project CSD2007-00045). The authors are also grateful to Prof. Juan Andrés for his collaboration in the preparation of this article

Toward an Understanding of the Growth of Ag Filaments on α-Ag2WO4 and Their Photoluminescent Properties: A Combined Experimental and Theoretical Study

A combined experimental and theoretical study was conducted on the structure and electronic properties of α-Ag2WO4 to clarify the nucleation and growth processes of Ag filaments on α-Ag2WO4 crystals induced by electron beam irradiation under electron microscopy. X-ray diffraction with Rietveld analysis, micro-Raman and Fourier-transform infrared spectroscopy were used to analyze the structural order/disorder of α-Ag2WO4 crystals. These complementary techniques indicated that the microwave-assisted hydrothermal method employed in the synthesis of α-Ag2WO4 crystals leads to the freezing of distorted [WO6] and [AgOy] (y = 2, 4, 6 and 7) clusters as the constituent polyhedra of α-Ag2WO4. On the basis of the theoretical and experimental results, we provide a complete assignment of the structure of α-Ag2WO4 and describe the relationship among the disorder, nucleation growth, rate of Ag formation, and photoluminescence behavior before and after the irradiation of the accelerated electron beam. Density functional theory (DFT) studies indicated significant changes in the order–disorder of the initial α-Ag2WO4electronic structure, with a decrease in the band gap value from 3.55 to 2.72 eV. The first stages of the electron irradiation on α-Ag2WO4 crystal were investigated by DFT calculations, and we have derived a mechanism to describe the formation and growth of Ag filaments during the electronic excitation of the [AgO2] cluster.This work is financially supported by the National Council for Scientific and Technological Development (CNPq), São Paulo Research Foundation (FAPESP), Prometeo/2009/053 (Generalitat Valenciana) and Ministerio de Economía y Competitividad (Spain), CTQ2012-36253-C03-02, and the Spanish–Brazilian program (PHB2009-0065-PC) for their financial support. TEM facilities were provided by LME-IQ-UNESP

Electrospun Polyaniline Fibers as Highly Sensitive Room Temperature Chemiresistive Sensors for Ammonia and Nitrogen Dioxide Gases

Electrospun polyaniline (PAni) fibers doped with different levels of (+)-camphor-10-sulfonic acid (HCSA) are fabricated and evaluated as chemiresistive gas sensors. The experimental results, based on both sensitivity and response time, show that doped PAni fibers are excellent ammonia sensors and that undoped PAni fibers are excellent nitrogen dioxide sensors. The fibers exhibit changes in measured resistances up to 60-fold for ammonia sensing, and more than five orders of magnitude for nitrogen dioxide sensing, with characteristic response times on the order of one minute in both cases. A time-dependent reaction-diffusion model is used to extract physical parameters from fitting experimental sensor data. The model is then used to illustrate the selection of optimal material design parameters for gas sensing by nanofibers.Massachusetts Institute of Technology. Institute for Soldier Nanotechnologies (Contract ARO W911NF-07-D-0004

Structural and electronic analysis of the atomic scale nucleation of Ag on α-Ag2WO4 induced by electron irradiation

In this work, we utilise a combination of theory, computation and experiments to understand the early events related to the nucleation of Ag filaments on α-Ag2WO4 crystals, which is driven by an accelerated electron beam from an electron microscope under high vacuum. The growth process and the chemical composition and elemental distribution in these filaments were analysed in depth at the nanoscale level using TEM, HAADF, EDS and XPS; the structural and electronic aspects were systematically studied in using first-principles electronic structure theory within QTAIM framework. The Ag nucleation and formation on α-Ag2WO4 is a result of the order/disorder effects generated in the crystal by the electron-beam irradiation. Both experimental and theoretical results show that this behavior is associated with structural and electronic changes of the [AgO2] and [AgO4] clusters and, to a minor extent, to the [WO6] cluster; these clusters collectively represent the constituent building blocks of α-Ag2WO4

Connessioni immateriali e reti infrastrutturali delle Regioni Baltiche

Sono passati pochissimi mesi dalla presentazione del contributo al convegno "Reti, Territori, Città" organizzato dal dipartimento PDTA della Sapienza e da cui è tratto questo scritto. In poco più di 100 giorni la storia dell’Europa è completamente trasformata e mentre il paper va in stampa proprio accanto a noi si sta combattendo una cruenta guerra che sta ridefinendo i confini delle nostre democrazie, ma anche le nostre certezze di libertà. L’articolo presentato acquisisce oggi per noi autrici uno speciale valore di premonizione politica ma anche di forte incentivo a resistere alla barbarie della prevaricazione con la forza della diplomazia, della trattativa pacifica e dell’arte

An enhanced gas ionization sensor from Y-doped vertically aligned conductive ZnO nanorods

A stable and highly sensitive gas ionization sensor (GIS) constructed from vertically aligned, conductive yttrium–doped ZnO nanorod (YZO NR) arrays is demonstrated. The conductive YZO NRs are synthesized using a facile one-pot hydrothermal method. At higher Y/Zn molar ratio, the aspect ratio of the YZO NRs is increased from 11 to 25. Doping with yttrium atoms decreases the electrical resistivity of ZnO NRs more than 100 fold. GIS measurements reveal a 6-fold enhancement in the sensitivity accompanied with a significant reduction in breakdown voltage from the highly conductive YZO NRs. Direct correlations between the resistivity of the NRs and GIS characteristics are established

The Impact of Cognitive and Behavioral Symptoms on ALS Patients and Their Caregivers

Previously thought to be a pure motor disease, amyotrophic lateral sclerosis (ALS) is now established as multisystem neurodegenerative disorder that lies on a continuum with frontotemporal dementia (FTD). Cognitive and behavioral symptoms primarily extend to executive function, personality, social conduct, and emotion processing. The assessment and management of cognitive and behavioral symptoms is complicated as they must be differentiated from psychological responses to a terminal diagnosis and progressive physical impairment. This is made more difficult by the limited number of studies investigating how these symptoms specifically affect patients and caregivers well-being. The current review focuses on the impact of cognitive and behavioral symptoms on patient and caregiver well-being and their implications for future research and interventions in ALS. This is an important area of research that could form the basis for more tailored, and potentially more successful, non-pharmacological interventions to improve psychological well-being among patients with ALS and their caregivers

Effect of TiO2 and Al2O3 Addition on the Performance of Chitosan/Phosphotungstic Composite Membranes for Direct Methanol Fuel Cells

: Composite chitosan/phosphotungstic acid (CS/PTA) with the addition of TiO2 and Al2O3 particles were synthesized to be used as proton exchange membranes in direct methanol fuel cells (DMFCs). The influence of fillers was assessed through X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, liquid uptake, ion exchange capacity and methanol permeability measurements. The addition of TiO2 particles into proton exchange membranes led to an increase in crystallinity and a decrease in liquid uptake and methanol permeability with respect to pristine CS/PTA membranes, whilst the effect of the introduction of Al2O3 particles on the characteristics of membranes is almost the opposite. Membranes were successfully tested as proton conductors in a single module DMFC of 1 cm2 as active area, operating at 50 °C fed with 2 M methanol aqueous solution at the anode and oxygen at the cathode. Highest performance was reached by using a membrane with TiO2 (5 wt.%) particles, i.e., a power density of 40 mW cm-2, almost doubling the performance reached by using pristine CS/PTA membrane (i.e., 24 mW cm-2)

Environmental Impact of Meals: How Big Is the Carbon Footprint in the School Canteens?

The inhabitants of the world are expected to grow by two billion in the next two decades; as population increases, food demand rises too, leading to more intensive resource exploitation and greater negative externalities related to food production. In this paper the environmental impact of meals provided in school canteens are analysed through the Life Cycle Assessment methodology, in order to evaluate the GHGs emissions released by food production. Meals, and not just individual foods, have been considered so as to include in the analysis the nutritional aspects on which meals are based. Results shows that meat, fish and dairy products are the most impacting in terms of greenhouse gas emissions, with values that shift from 31.7 and 24.1 kg CO2 eq for butter and veal, to 2.37 kg CO2 eq for the octopus, while vegetables, legumes, fruit and cereals are less carbon intensive (average of 3.71 kg CO2 eq for the considered vegetables). When the environmental impact is related to the food energy, the best option are first courses because they combine a low carbon footprint with a high energy content. The results of the work can be used both by the consumer, who can base the meal choice on environmental impact information, and by food services, who can adjust menus to achieve a more sustainable production