2,819 research outputs found
Local sensory control of a dexterous end effector
A numerical scheme was developed to solve the inverse kinematics for a user-defined manipulator. The scheme was based on a nonlinear least-squares technique which determines the joint variables by minimizing the difference between the target end effector pose and the actual end effector pose. The scheme was adapted to a dexterous hand in which the joints are either prismatic or revolute and the fingers are considered open kinematic chains. Feasible solutions were obtained using a three-fingered dexterous hand. An algorithm to estimate the position and orientation of a pre-grasped object was also developed. The algorithm was based on triangulation using an ideal sensor and a spherical object model. By choosing the object to be a sphere, only the position of the object frame was important. Based on these simplifications, a minimum of three sensors are needed to find the position of a sphere. A two dimensional example to determine the position of a circle coordinate frame using a two-fingered dexterous hand was presented
Nanostructural differences in pectic polymers isolated from strawberry fruits with low expression levels of pectate lyase or polygalacturonase genes
Our research group has obtained transgenic strawberry plants expressing antisense sequences of either a pectate lyase (APEL lines) [1] or a polygalacturonase gene (APG lines) [2]. Both genes encode ripening-specific endo-pectinases with a common target, deesterified homogalacturonans, but each enzyme act by a different mechanism and pH range. Ripe fruits from both transgenic genotypes were significantly firmer than control, being APG fruits on average 25% firmer than APEL fruits. Cell wall analysis of both transgenic genotypes indicated that pectin fractions extracted with CDTA and sodium carbonate were significantly modified in transgenic fruits [2,3]. To gain insight in the role of these pectinases in pectin disassembly during ripening, CDTA and Na2CO3 pectins have been analyzed by atomic force microscopy (AFM). APEL and APG CDTA pectins had similar contour lengths but both were significantly longer than control. Similarly, APG carbonate chains were longer than control, showing APEL carbonate chains an intermediate length. Furthermore, transgenic pectins displayed a more complex branching pattern and a higher number of micellar aggregates, especially in the sodium carbonate fractions of APG samples. Acid hydrolysis of carbonate pectins reduced the number of micellar aggregates. AFM analyses confirm that the inhibition of both pectinases reduces pectin disassembly, and also suggest that each pectinase acts on specific pectin domains. Particularly, polygalacturonase silencing induces more significant pectin modifications, nicely correlated with the firmer phenotype of APG fruits, than the down-regulation of pectate lyase
Nanostructural changes in cell wall pectins during strawberry fruit ripening assessed by atomic force microscopy
Rapid loss of firmness occurs during strawberry (Fragaria × ananassa Duch) ripening, resulting in a short shelf life and high economic losses. The disassembly of cell walls is considered the main responsible for fruit softening, being pectins extensively modified during strawberry ripening (Paniagua et al. 2014). Atomic force microscopy allows the analysis of individual polymer chains at nanostructural level with a minimal sample preparation (Morris et al., 2001). The main objective of this research was to compare pectins of green and red ripe strawberry fruits at the nanostructural level to shed light on structural changes that could be related to softening.
Cell walls from strawberry fruits were extracted and fractionated with different solvents to obtain fractions enriched in a specific component. The yield of cell wall material, as well as the amount of the different fractions, decreased in ripe fruits. CDTA and Na2CO3 fractions underwent the largest decrements, being these fractions enriched in pectins supposedly located in the middle lamella and primary cell wall, respectively. Uronic acid content also decreased significantly during ripening in both pectin fractions, but the amount of soluble pectins, those extracted with phenol:acetic acid:water (PAW) and water increased in ripe fruits. Monosaccharide composition in CDTA and Na2CO3 fractions was determined by gas chromatography. In both pectin fractions, the amount of Ara and Gal, the two most abundant carbohydrates, decreased in ripe fruits. The nanostructural characteristics of CDTA and Na2CO3 pectins were analyzed by AFM. Isolated pectic chains present in the CDTA fraction were significantly longer and more branched in samples from green fruits than those present in samples obtained from red fruit. In spite of slight differences in length distributions, Na2CO3 samples from unripe fruits displayed some longer chains at low frequency that were not detected in ripe fruits. Pectin aggregates were more frequently observed in green fruit samples from both fractions. These results support that pectic chain length and the nanostructural complexity of the pectins present in CDTA and Na2CO3 fractions diminish during strawberry fruit development, and these changes, jointly with the loss of neutral sugars, could contribute to the solubilization of pectins and fruit softening.
Paniagua et al. (2014). Ann Bot, 114: 1375-1383
Morris et al. (2001). Food Sci Tech 34: 3-10
This research was supported by FEDER EU Funds and the Ministerio de Educación y Ciencia of Spain (grant reference AGL2011-24814)Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
Wave Climate Model of the Mid-Atlantic Shelf and Shoreline (Virginia Sea): Model Development, Shelf Geomorphology, and Preliminary Results
A computerized wave climate model is developed that applies linear wave theory and shelf depth information to predict wave behavior as they pass over the continental shelf as well as the resulting wave energy distributions along the coastline. Reviewed are also the geomorphology of the Mid-Atlantic Continental Shelf, wave computations resulting from 122 wave input conditions, and a preliminary analysis of these data
Unravelling the nanostructure of strawberry fruit pectins by atomic force microscopy
Atomic force microscopy (AFM) allows the analysis of individual polymers at nanostructural level with a minimal sample preparation. This technique has been used to analyse the pectin disassembly process during the ripening and postharvest storage of several fleshy fruits. In general, pectins analysed by AFM are usually visualized as isolated chains, unbranched or with a low number of branchs and, occasionally, as large aggregates. However, the exact nature of these structures is unknown. It has been suggested that pectin aggregates represent a mixture of rhamnonogalacturonan I and homogalacturonan, while isolated chains and their branches are mainly composed by polygalacturonic acid. In order to gain insight into the nature of these structures, sodium carbonate soluble pectins from ripe strawberry (Fragaria x ananassa, Duch.) fruits were subjected to enzymatic digestion with endo-Polygalacturonase M2 from Aspergillus aculeatus, and the samples visualized by AFM at different time intervals. Pectins isolated from control, non-transformed plants, and two transgenic genotypes with low level of expression of ripening-induced pectinase genes encoding a polygalacturonase (APG) or a pectate lyase (APEL) were also included in this study. Before digestion, isolated pectin chains from control were shorter than those from transgenic fruits, showing number-average (LN) contour length values of 73.2 nm vs. 95.9 nm and 91.4 nm in APG and APEL, respectively. The percentage of branched polymers was significantly higher in APG polyuronides than in the remaining genotypes, 33% in APG vs. 6% in control and APEL. As a result of the endo-PG treatment, a gradual decrease in the main backbone length of isolated chains was observed in the three samples. The minimum LN value was reached after 8 h of digestion, being similar in the three genotypes, 22 nm. By contrast, the branches were not visible after 1.5-2 h of digestion. LN values were plotted against digestion time and the data fitted to a first-order exponential decay curve, obtaining R2 values higher than 0.9. The half digestion time calculated with these equations were similar for control and APG pectins, 1.7 h, but significantly higher in APEL, 2.5 h, indicating that these polymer chains were more resistant to endo-PG digestion. Regarding the pectin aggregates, their volumes were estimated and used to calculate LN molecular weights. Before digestion, control and APEL samples showed complexes of similar molecular weights, 1722 kDa, and slightly higher than those observed in APG samples. After endo-PG digestion, size of complexes diminished significantly, reaching similar values in the three pectin samples, around 650 kDa. These results suggest that isolated polymer chains visualized by AFM are formed by a HG domain linked to a shorter polymer resistant to endo-PG digestion, maybe xylogalacturonan or RG-I. The silencing of the pectate lyase gene slightly modified the structure and/or chemical composition of polymer chains making these polyuronides more resistant to enzymatic degradation. Similarly, polygalacturonic acid is one of the main component of the aggregates.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
AFM study of strawberry pectin nanostructure and its relevance on fruit texture
Atomic force microscopy (AFM) has been used to characterize the nanostructure of cell wall pectins during strawberry fruit growth and ripening, as well as in transgenic fruits with pectinase genes downregulated. This technique allows the imaging of individual polymers at high magnification with minimal sample preparation. AFM studies during fruit development show that pectin size, ramification and aggregation is reduced in ripe fruits. Additionally, transgenic lines with different pectinase genes downregulated (polygalacturonase, pectate lyase and B-galactosidase) also show a more complex pectin nanostructure, including longer chains, higher branching degree and larger presence of aggregates. In all those cases the higher pectin
complexity at nanoscale correlates with a reduced softening in strawberry fruits at macroscale level. Globally, our results support the key role of pectins in fruit structure and highlights the use of AFM as a powerful tool to gain insights about the
bases of textural fruit quality not only in strawberry, but also in other commercial crops.AGL2017-86531-C2-1-R, Ministerio de Economía, Industria y Competitividad of Spain and FEDER EU funds.
Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
Zassenhaus conjecture for central extensions of S5
We confirm a conjecture of Zassenhaus about rational conjugacy of torsion units in
integral group rings for a covering group of the symmetric group S5 and for the general linear
group GLð2; 5Þ. The first result, together with others from the literature, settles the conjugacy
question for units of prime-power order in the integral group ring of a finite Frobenius group
The statement that folate supraphysiological levels in uremic patients do not cause harm should not go unchallenged
Diversity within the major histocompatibility complex (MHC) reflects the immunological fitness of a population. MHC-linked microsatellite markers provide a simple and inexpensive method for studying MHC diversity in large scale studies. We have developed six MHC-linked microsatellite markers in the domestic cat and used these, in conjunction with five neutral microsatellites, to assess MHC diversity in domestic mixed breed (n = 129) and purebred Burmese (n = 61) cat populations in Australia. The MHC of outbred Australian cats is polymorphic (average allelic richness = 8.52) while the Burmese population has much significantly lower MHC diversity (average allelic richness = 6.81; P<0.01). The MHC-linked microsatellites along with MHC cloning and sequencing demonstrated moderate MHC diversity in cheetahs (n = 13) and extremely low diversity in Gir lions (n = 13). Our MHC-linked microsatellite markers have potential future use in diversity and disease studies in other populations and breeds of cats as well as in wild felid species
Welcoming gallium- and indium-fumarate MOFs to the family:synthesis, comprehensive characterization, observation of porous hydrophobicity, and CO<sub>2</sub> dynamics
The
properties and applications of metal–organic frameworks
(MOFs) are strongly dependent on the nature of the metals and linkers,
along with the specific conditions employed during synthesis. Al-fumarate,
trademarked as Basolite A520, is a porous MOF that incorporates aluminum
centers along with fumarate linkers and is a promising material for
applications involving adsorption of gases such as CO2.
In this work, the solvothermal synthesis and detailed characterization
of the gallium- and indium-fumarate MOFs (Ga-fumarate, In-fumarate)
are described. Using a combination of powder X-ray diffraction, Rietveld
refinements, solid-state NMR spectroscopy, IR spectroscopy, and thermogravimetric
analysis, the topologies of Ga-fumarate and In-fumarate are revealed
to be analogous to Al-fumarate. Ultra-wideline 69Ga, 71Ga, and 115In NMR experiments at 21.1 T strongly
support our refined structure. Adsorption isotherms show that the
Al-, Ga-, and In-fumarate MOFs all exhibit an affinity for CO2, with Al-fumarate being the superior adsorbent at 1 bar and
273 K. Static direct excitation and cross-polarized 13C
NMR experiments permit investigation of CO2 adsorption
locations, binding strengths, motional rates, and motional angles
that are critical to increasing adsorption capacity and selectivity
in these materials. Conducting the synthesis of the indium-based framework
in methanol demonstrates a simple route to introduce porous hydrophobicity
into a MIL-53-type framework by incorporation of metal-bridging −OCH3 groups in the MOF pores
The Late Stage of COPI Vesicle Fission Requires Shorter Forms of Phosphatidic Acid and Diacylglycerol
Studies on vesicle formation by the Coat Protein I (COPI) complex have contributed to a basic understanding of how vesicular transport is initiated. Phosphatidic acid (PA) and diacylglycerol (DAG) have been found previously to be required for the fission stage of COPI vesicle formation. Here, we find that PA with varying lipid geometry can all promote early fission, but only PA with shortened acyl chains promotes late fission. Moreover, diacylglycerol (DAG) acts after PA in late fission, with this role of DAG also requiring shorter acyl chains. Further highlighting the importance of the short-chain lipid geometry for late fission, we find that shorter forms of PA and DAG promote the vesiculation ability of COPI fission factors. These findings advance a general understanding of how lipid geometry contributes to membrane deformation for vesicle fission, and also how proteins and lipids coordinate their actions in driving this process
- …