Experimental determination of the permeability of engineering textiles: Benchmark II

In this second international permeability benchmark, the in-plane permeability values of a carbon fabric were studied by twelve research groups worldwide. One participant also investigated the deformation of the tested carbon fabric. The aim of this work was to obtain comparable results in order to make a step toward standardization of permeability measurements. Unidirectional injections were thus conducted to determine the unsaturated in-plane permeability tensor of the fabric. Procedures used by participants were specified in the guidelines defined for this benchmark. Participants were asked to use the same values for parameters such as fiber volume fraction, injection pressure and fluid viscosity to minimize sources of scatter. The comparison of the results from each participant was encouraging. The scatter between data obtained while respecting the guidelines was below 25%. However, a higher dispersion was observed when some parameters differed from the recommendations of this exercise.The authors are grateful to J.M. Beraud from Hexcel Fabrics for his support that made possible this exercise. The contributions of J.B. Alms, N.C. Correia, S. Advani, E. Ruiz and P.C.T. Goncalves to the preparation of the guidelines document and templates are acknowledged by the participants of this benchmark.Vernet, N.; Ruiz, E.; Advani, S.; Alms, JB.; Aubert, M.; Barburski, M.; Barari, B.... (2014). Experimental determination of the permeability of engineering textiles: Benchmark II. Composites Part A: Applied Science and Manufacturing. 61:172-184. doi:10.1016/j.compositesa.2014.02.010S1721846

The absolute abundance calibration project: the <i>Lycopodium</i> marker-grain method put to the test

Traditionally, dinoflagellate cyst concentrations are calculated by adding an exotic marker or “spike” (such as Lycopodium clavatum) to each sample following the method of Stockmarr (1971). According to Maher (1981), the total error is controlled mainly by the error on the count of Lycopodium clavatum spores. In general, the more L. clavatum spores counted, the lower the error. A dinocyst / L. clavatum spore ratio of ~2 will give optimal results in terms of precision and time spent on a sample. It has also been proven that the use of the aliquot method yields comparable results to the marker-grain method (de Vernal et al., 1987). Critical evaluation of the effect of different laboratory procedures on the marker grain concentration in each sample has never been executed. Although, it has been reported that different processing methods (e.g. ultrasonication, oxidizing, etc.) are to a certain extent damaging to microfossils (e.g. Hodgkinson, 1991), it is not clear how this is translated into concentration calculations. It is wellknown from the literature that concentration calculations of dinoflagellate cysts from different laboratories are hard to resolve into a consistent picture. The aim of this study is to remove these inconsistencies and to make recommendations for the use of a standardized methodology. Sediment surface samples from four different localities (North Sea, Celtic Sea, NW Africa and Benguela) were macerated in different laboratories each using its own palynological maceration technique. A fixed amount of Lycopodium clavatum tablets was added to each sample. The uses of different preparation methodologies (sieving, ultrasonicating, oxidizing …) are compared using both concentrations – calculated from Lycopodium tablets - and relative abundances (more destructive methods will increase the amount of resistant taxa). Additionally, this study focuses on some important taxonomic issues, since obvious interlaboratorial differences in nomenclature are recorded

Anesthetics Impact the Resolution of Inflammation

Local and volatile anesthetics are widely used for surgery. It is not known whether anesthetics impinge on the orchestrated events in spontaneous resolution of acute inflammation. Here we investigated whether a commonly used local anesthetic (lidocaine) and a widely used inhaled anesthetic (isoflurane) impact the active process of resolution of inflammation.Using murine peritonitis induced by zymosan and a systems approach, we report that lidocaine delayed and blocked key events in resolution of inflammation. Lidocaine inhibited both PMN apoptosis and macrophage uptake of apoptotic PMN, events that contributed to impaired PMN removal from exudates and thereby delayed the onset of resolution of acute inflammation and return to homeostasis. Lidocaine did not alter the levels of specific lipid mediators, including pro-inflammatory leukotriene B(4), prostaglandin E(2) and anti-inflammatory lipoxin A(4), in the cell-free peritoneal lavages. Addition of a lipoxin A(4) stable analog, partially rescued lidocaine-delayed resolution of inflammation. To identify protein components underlying lidocaine's actions in resolution, systematic proteomics was carried out using nanospray-liquid chromatography-tandem mass spectrometry. Lidocaine selectively up-regulated pro-inflammatory proteins including S100A8/9 and CRAMP/LL-37, and down-regulated anti-inflammatory and some pro-resolution peptides and proteins including IL-4, IL-13, TGF-â and Galectin-1. In contrast, the volatile anesthetic isoflurane promoted resolution in this system, diminishing the amplitude of PMN infiltration and shortening the resolution interval (Ri) approximately 50%. In addition, isoflurane down-regulated a panel of pro-inflammatory chemokines and cytokines, as well as proteins known to be active in cell migration and chemotaxis (i.e., CRAMP and cofilin-1). The distinct impact of lidocaine and isoflurane on selective molecules may underlie their opposite actions in resolution of inflammation, namely lidocaine delayed the onset of resolution (T(max)), while isoflurane shortened resolution interval (Ri).Taken together, both local and volatile anesthetics impact endogenous resolution program(s), altering specific resolution indices and selective cellular/molecular components in inflammation-resolution. Isoflurane enhances whereas lidocaine impairs timely resolution of acute inflammation

First Assessment of the Impacts of the COVID-19 Pandemic on Global Marine Recreational Fisheries

This work is the result of an international research effort to determine the main impacts of the COVID-19 pandemic on marine recreational fishing. Changes were assessed on (1) access to fishing, derived from lockdowns and other mobility restrictions; (2) ecosystems, because of alterations in fishing intensity and human presence; (3) the blue economy, derived from alterations in the investments and expenses of the fishers; and (4) society, in relation to variations in fishers’ health and well-being. For this, a consultation with experts from 16 countries was carried out, as well as an international online survey aimed at recreational fishers, that included specific questions designed to capture fishers’ heterogeneity in relation to behavior, skills and know-how, and vital involvement. Fishers’ participation in the online survey (5,998 recreational fishers in 15 countries) was promoted through a marketing campaign. The sensitivity of the fishers’ clustering procedure, based on the captured heterogeneity, was evaluated by SIMPER analysis and by generalized linear models. Results from the expert consultation highlighted a worldwide reduction in marine recreational fishing activity. Lower human-driven pressures are expected to generate some benefits for marine ecosystems. However, experts also identified high negative impacts on the blue economy, as well as on fisher health and well-being because of the loss of recreational fishing opportunities. Most (98%) of the fishers who participated in the online survey were identified as advanced, showing a much higher degree of commitment to recreational fishing than basic fishers (2%). Advanced fishers were, in general, more pessimistic about the impacts of COVID-19, reporting higher reductions in physical activity and fish consumption, as well as poorer quality of night rest, foul mood, and raised more concerns about their health status. Controlled and safe access to marine recreational fisheries during pandemics would provide benefits to the health and well-being of people and reduce negative socioeconomic impacts, especially for vulnerable social groups.Versión del edito

Recreational sea fishing in Europe in a global contextParticipation rates, fishing effort, expenditure, and implications for monitoring and assessment

Marine recreational fishing (MRF) is a high-participation activity with large economic value and social benefits globally, and it impacts on some fish stocks. Although reporting MRF catches is a European Union legislative requirement, estimates are only available for some countries. Here, data on numbers of fishers, participation rates, days fished, expenditures, and catches of two widely targeted species were synthesized to provide European estimates of MRF and placed in the global context. Uncertainty assessment was not possible due to incomplete knowledge of error distributions; instead, a semi-quantitative bias assessment was made. There were an estimated 8.7 million European recreational sea fishers corresponding to a participation rate of 1.6%. An estimated 77.6 million days were fished, and expenditure was Euro5.9 billion annually. There were higher participation, numbers of fishers, days fished and expenditure in the Atlantic than the Mediterranean, but the Mediterranean estimates were generally less robust. Comparisons with other regions showed that European MRF participation rates and expenditure were in the mid-range, with higher participation in Oceania and the United States, higher expenditure in the United States, and lower participation and expenditure in South America and Africa. For both northern European sea bass (Dicentrarchus labrax, Moronidae) and western Baltic cod (Gadus morhua, Gadidae) stocks, MRF represented 27% of the total removals. This study highlights the importance of MRF and the need for bespoke, regular and statistically sound data collection to underpin European fisheries management. Solutions are proposed for future MRF data collection in Europe and other regions to support sustainable fisheries management.Institut Francais de Recherche pour l'Exploitation de la Mer; French Ministry of Fisheries Management; Greek National Data Collection Programme; European Commission, Data Collection Framework; Department for Environment, Food and Rural Affairs [MF1221, MF1230, MI001]; Norges Forskningsrad [267808]; State Department of Agriculture, Food Security and Fisheries Mecklenburg-Western Pomerania; Interreg IVa 2 Seas; Dutch Ministry of Economic Affairs; European Fishery Fund; Government of Galicia [ED481B2014/034-0

Exploring the interpersonal-, organization-, and system-level factors that influence the implementation and use of an innovation-synoptic reporting-in cancer care

<p>Abstract</p> <p>Background</p> <p>The dominant method of reporting findings from diagnostic and surgical procedures is the narrative report. In cancer care, this report inconsistently provides the information required to understand the cancer and make informed patient care decisions. Another method of reporting, the synoptic report, captures specific data items in a structured manner and contains only items critical for patient care. Research demonstrates that synoptic reports vastly improve the quality of reporting. However, synoptic reporting represents a complex innovation in cancer care, with implementation and use requiring fundamental shifts in physician behaviour and practice, and support from the organization and larger system. The objective of this study is to examine the key interpersonal, organizational, and system-level factors that influence the implementation and use of synoptic reporting in cancer care.</p> <p>Methods</p> <p>This study involves three initiatives in Nova Scotia, Canada, that have implemented synoptic reporting within their departments/programs. Case study methodology will be used to study these initiatives (the cases) in-depth, explore which factors were barriers or facilitators of implementation and use, examine relationships amongst factors, and uncover which factors appear to be similar and distinct across cases. The cases were selected as they converge and differ with respect to factors that are likely to influence the implementation and use of an innovation in practice. Data will be collected through in-depth interviews, document analysis, observation of training sessions, and examination/use of the synoptic reporting tools. An audit will be performed to determine/quantify use. Analysis will involve production of a case record/history for each case, in-depth analysis of each case, and cross-case analysis, where findings will be compared and contrasted across cases to develop theoretically informed, generalisable knowledge that can be applied to other settings/contexts. Ethical approval was granted for this study.</p> <p>Discussion</p> <p>This study will contribute to our knowledge base on the multi-level factors, and the relationships amongst factors in specific contexts, that influence implementation and use of innovations such as synoptic reporting in healthcare. Such knowledge is critical to improving our understanding of implementation processes in clinical settings, and to helping researchers, clinicians, and managers/administrators develop and implement ways to more effectively integrate innovations into routine clinical care.</p

S-D logic-informed customer engagement: Integrative framework, revised fundamental propositions, and application to CRM

Advance online in 2016</p

Numerical Prediction of Fiber Orientation in Injection-molding

We develop a numerical method for calculating fiber orientation in the midsurface of a molded part of small thickness. Two-dimensional fiber orientation is predicted on the basis of either Jeffery's equation or a constitutive equation for the orientation tensor. The calculation is fully transient; it is performed on a time-dependent flow domain. The method is based on finite elements. Updated finite element meshes are generated at every instant of filling and allow one to perform an accurate calculation of the orientation even along the boundary of the flow domain. The method is applied to several examples in plane and three-dimensional geometries