Solid Freeform Fabrication Based on Micro-Plasma Powder Deposition

This paper presents a solid freeform fabrication (SFF) technique based on micro-plasma powder deposition (MPPD). The relationship between the geometric features of the deposited layers and the welding parameters is investigated. The arc length is controlled through the monitoring of the arc voltage. The result of building parts with functionally graded components by the MPPD process is shown as well. The microstructure and the properties of the deposited layers are analyzed. The experimental results show that the MPPD process is a promising welding-based solid freeform fabrication technology.Mechanical Engineerin

On stoichiometry and intermixing at the spinel/perovskite interface in CoFe2O4/BaTiO3 thin films

The performance of complex oxide heterostructures depends primarily on the interfacial coupling of the two component structures. This interface character inherently varies with the synthesis method and conditions used since even small composition variations can alter the electronic, ferroelectric, or magnetic functional properties of the system. The focus of this article is placed on the interface character of a pulsed laser deposited CoFe2O4/BaTiO3 thin film. Using a range of state-of-the-art transmission electron microscopy methodologies, the roles of substrate morphology, interface stoichiometry, and cation intermixing are determined on the atomic level. The results reveal a surprisingly uneven BaTiO3 substrate surface formed after the film deposition and Fe atom incorporation in the top few monolayers inside the unit cell of the BaTiO3 crystal. Towards the CoFe2O4 side, a disordered region extending several nanometers from the interface was revealed and both Ba and Ti from the substrate were found to diffuse into the spinel layer. The analysis also shows that within this somehow incompatible composite interface, a different phase is formed corresponding to the compound Ba2Fe3Ti5O15, which belongs to the ilmenite crystal structure of FeTiO3 type. The results suggest a chemical activity between these two oxides, which could lead to the synthesis of complex engineered interfaces

Novel temperature stable high-ε r microwave dielectrics in the Bi 2 O 3 –TiO 2 –V 2 O 5 system

In the present work, a series of low temperature firing (1 − x)BiVO4–xTiO2 (x = 0.4, 0.50, 0.55 and 0.60) microwave dielectric ceramics was prepared using traditional solid state reaction method. From back-scattered electron images (BEI), X-ray diffraction (XRD) and energy dispersive analysis (EDS), there was negligible reaction between BiVO4 and TiO2 at the optimal sintering temperature ∼900 °C. As x increased from 0.4 to 0.60, permittivity (εr) increased from 81.8 to 87.7, quality factor value (Qf) decreased from 12 290 to 8240 GHz and temperature coefficient (TCF) shifted from −121 to +46 ppm per °C. Temperature stable microwave dielectric ceramic was obtained in 0.45BiVO4–0.55TiO2 composition sintered at 900 °C with a εr ∼ 86, a Qf ∼ 9500 GHz and a TCF ∼ −8 ppm per °C. Far-infrared reflectivity fitting indicated that stretching of Bi–O and Ti–O bonds in this system dominated dielectric polarization. This series of ceramics are promising not only for low temperature co-fired ceramic (LTCC) technology but also as substrates for physically and electrically small dielectrically loaded micro-strip patch antennas

Tuning the electrocaloric enhancement near the morphotropic phase boundary in lead-free ceramics

This project was funded by EPSRC (EP/G060940/1 and EP/P505674/1) and the Grant Agency of the Slovak Academy of Sciences (2/0057/14)

Assessment of the molecular mechanisms of action of novel 4-phenylpyridine-2-one and 6-phenylpyrimidin-4-one allosteric modulators at the M1 muscarinic acetylcholine receptors

Positive allosteric modulators (PAMs) that target the M1 muscarinic acetylcholine (ACh) receptor (M1 mAChR) are potential treatments for cognitive deficits in conditions such as Alzheimer's disease and schizophrenia. We recently reported novel 4-phenylpyridine-2-one and 6-phenylpyrimidin-4-one M1 mAChR PAMs with the potential to display different modes of positive allosteric modulation and/or agonism (Mistry et al., 2016), but their molecular mechanisms of action remain undetermined. The current study compared the pharmacology of three such novel PAMs with the prototypical first-generation PAM, BQCA, in a recombinant Chinese hamster ovary (CHO) cell line stably expressing the human M1 mAChR. Interactions between the orthosteric agonists and the novel PAMs or BQCA suggested their allosteric effects were solely governed by modulation of agonist affinity. The greatest degree of positive co-operativity was observed with higher efficacy agonists, whereas minimal potentiation was observed when the modulators were tested against the lower efficacy agonist, xanomeline. Each PAM was investigated for its effects on the endogenous agonist, ACh, on three different signalling pathways, (ERK1/2 phosphorylation, IP1 accumulation and β-arrestin-2 recruitment), revealing that the allosteric potentiation generally tracked with the efficiency of stimulus-response coupling and that there was little pathway bias in the allosteric effects. Thus, despite the identification of novel allosteric scaffolds targeting the M1 mAChR, the molecular mechanism of action of these compounds is largely consistent with a model of allostery previously described for BQCA, suggesting that this may be a more generalized mechanism for M1 mAChR PAM effects than previously appreciated

Experimental determination of the eutectic temperature in air of the CuO-TiO2 pseudobinary system

Eutectic temperature and composition in the CuO–TiO2 pseudobinary system have been experimentally determined in air by means differential thermal analysis (DTA), thermogravimetry (TG) and hot-stage microscopy (HSM). Samples of the new eutectic composition treated at different temperatures have been characterized by X-ray diffraction (XRD) and X-ray absorption near-edge structural spectroscopy (XANES) to identify phases and to determine the Cu valence state, respectively. The results show that the eutectic temperature in air is higher by 100 °C (∼1000 °C) for a Ti-richer composition (XTiO2=25 mol%) than the one calculated in the literature. The reduction of Cu2+ to Cu+ takes places at about 1030 °C. The existence of Cu2TiO3 and Cu3TiO4 has been confirmed by XRD in the temperature range between 1045 and 1200 °C