Transcranial Direct Current Stimulation and Aphasia Treatment: A Pilot Study of Anodal, Cathodal and Sham Stimulation

Transcranial direct current stimulation (tDCS) may potentially enhance language therapy outcomes in aphasia. We report behavioral results for twelve participants with chronic aphasia matched for severity and randomized to receive anodal, cathodal or sham stimulation to the left hemisphere, concurrent with intensive speech-language therapy. Importantly, tDCS (1mA for 13 minutes) given 5 days a week over a prolonged period of time (6 weeks) was found to be safe. There was an advantage of both anodal and cathodal stimulation over sham stimulation. Cathodal stimulation to the left hemisphere may be a viable option and should not be overlooked in future research

The state of the Martian climate

60°N was +2.0°C, relative to the 1981–2010 average value (Fig. 5.1). This marks a new high for the record. The average annual surface air temperature (SAT) anomaly for 2016 for land stations north of starting in 1900, and is a significant increase over the previous highest value of +1.2°C, which was observed in 2007, 2011, and 2015. Average global annual temperatures also showed record values in 2015 and 2016. Currently, the Arctic is warming at more than twice the rate of lower latitudes

Lived Experience-Led Research Agenda to Address Early Death in People With a Diagnosis of a Serious Mental Illness: A Consensus Statement

Importance People with serious mental illness (SMI), defined as a diagnosis of schizophrenia spectrum disorder, bipolar disorder, or disabling major depressive disorder) die approximately 10 to 25 years earlier than the general population. Objective To develop the first-ever lived experience–led research agenda to address early mortality in people with SMI. Evidence Review A virtual 2-day roundtable comprising 40 individuals convened on May 24 and May 26, 2022, and used a virtual Delphi method to arrive at expert group consensus. Participants responded to 6 rounds of virtual Delphi discussion via email that prioritized research topics and agreement on recommendations. The roundtable was composed of individuals with lived experience of mental health and/or substance misuse, peer support specialists, recovery coaches, parents and caregivers of people with SMI, researchers and clinician-scientists with and without lived experience, policy makers, and patient-led organizations. Twenty-two of 28 (78.6%) of the authors who provided data represented people with lived experiences. Roundtable members were selected by reviewing the peer-reviewed and gray literature on early mortality and SMI, direct email, and snowball sampling. Findings The following recommendations are presented in order of priority as identified by the roundtable participants: (1) improve the empirical understanding of the direct and indirect social and biological contributions of trauma on morbidity and early mortality; (2) advance the role of family, extended families, and informal supporters; (3) recognize the importance of co-occurring disorders and early mortality; (4) redefine clinical education to reduce stigma and support clinicians through technological advancements to improve diagnostic accuracy; (5) examine outcomes meaningful to people with an SMI diagnosis, such as loneliness and sense of belonging, and stigma and their complex relationship with early mortality; (6) advance the science of pharmaceuticals, drug discovery, and choice in medication use; (7) use precision medicine to inform treatment; and (8) redefine the terms system literacy and health literacy. Conclusions and Relevance The recommendations of this roundtable are a starting point for changing practice and highlighting lived experience–led research priorities as an option to move the field forward.publishedVersio

Variations in corticosteroid/anesthetic injections for painful shoulder conditions: comparisons among orthopaedic surgeons, rheumatologists, and physical medicine and primary-care physicians

<p>Abstract</p> <p>Background</p> <p>Variations in corticosteroid/anesthetic doses for injecting shoulder conditions were examined among orthopaedic surgeons, rheumatologists, and primary-care sports medicine (PCSMs) and physical medicine and rehabilitation (PMRs) physicians to provide data needed for documenting inter-group differences for establishing uniform injection guidelines.</p> <p>Methods</p> <p>264 surveys, sent to these physicians in our tri-state area of the western United States, addressed corticosteroid/anesthetic doses and types used for subacromial impingement, degenerative glenohumeral and acromioclavicular arthritis, biceps tendinitis, and peri-scapular trigger points. They were asked about preferences regarding: 1) fluorinated vs. non-fluorinated corticosteroids, 2) acetate vs. phosphate types, 3) patient age, and 4) adjustments for special considerations including young athletes and diabetics.</p> <p>Results</p> <p>169 (64% response rate, RR) surveys were returned: 105/163 orthopaedic surgeons (64%RR), 44/77 PCSMs/PMRs (57%RR), 20/24 rheumatologists (83%RR). Although corticosteroid doses do not differ significantly between specialties (p > 0.3), anesthetic volumes show broad variations, with surgeons using larger volumes. Although 29% of PCSMs/PMRs, 44% rheumatologists, and 41% surgeons exceed "recommended" doses for the acromioclavicular joint, >98% were within recommendations for the subacromial bursa and glenohumeral joint. Depo-Medrol^®(methylprednisolone acetate) and Kenalog^®(triamcinolone acetonide) are most commonly used. More rheumatologists (80%) were aware that there are acetate and phosphate types of corticosteroids as compared to PCSMs/PMRs (76%) and orthopaedists (60%). However, relatively fewer rheumatologists (25%) than PCSMs/PMRs (32%) or orthopaedists (32%) knew that phosphate types are more soluble. Fluorinated corticosteroids, which can be deleterious to soft tissues, were used with these frequencies for the biceps sheath: 17% rheumatologists, 8% PCSMs/PMRs, 37% orthopaedists. Nearly 85% use the same non-fluorinated corticosteroid for all injections; <10% make adjustments for diabetic patients.</p> <p>Conclusion</p> <p>Variations between specialists in anesthetic doses suggest that surgeons (who use significantly larger volumes) emphasize determining the percentage of pain attributable to the injected region. Alternatively, this might reflect a more profound knowledge that non-surgeons specialists have of the potentially adverse cardiovascular effects of these agents. Variations between these specialists in corticosteroid/anesthetic doses and/or types, and their use in some special situations (e.g., diabetics), bespeak the need for additional investigations aimed at establishing uniform injection guidelines, and for identifying knowledge deficiencies that warrant advanced education.</p

Shattered pellet injection experiments at JET in support of the ITER disruption mitigation system design

A series of experiments have been executed at JET to assess the efficacy of the newly installed shattered pellet injection (SPI) system in mitigating the effects of disruptions. Issues, important for the ITER disruption mitigation system, such as thermal load mitigation, avoidance of runaway electron (RE) formation, radiation asymmetries during thermal quench mitigation, electromagnetic load control and RE energy dissipation have been addressed over a large parameter range. The efficiency of the mitigation has been examined for the various SPI injection strategies. The paper summarises the results from these JET SPI experiments and discusses their implications for the ITER disruption mitigation scheme

A control oriented strategy of disruption prediction to avoid the configuration collapse of tokamak reactors

The objective of thermonuclear fusion consists of producing electricity from the coalescence of light nuclei in high temperature plasmas. The most promising route to fusion envisages the confinement of such plasmas with magnetic fields, whose most studied configuration is the tokamak. Disruptions are catastrophic collapses affecting all tokamak devices and one of the main potential showstoppers on the route to a commercial reactor. In this work we report how, deploying innovative analysis methods on thousands of JET experiments covering the isotopic compositions from hydrogen to full tritium and including the major D-T campaign, the nature of the various forms of collapse is investigated in all phases of the discharges. An original approach to proximity detection has been developed, which allows determining both the probability of and the time interval remaining before an incoming disruption, with adaptive, from scratch, real time compatible techniques. The results indicate that physics based prediction and control tools can be developed, to deploy realistic strategies of disruption avoidance and prevention, meeting the requirements of the next generation of devices.Confining plasma and managing disruptions in tokamak devices is a challenge. Here the authors demonstrate a method predicting and possibly preventing disruptions and macroscopic instabilities in tokamak plasma using data from JET

Overview of JET results for optimising ITER operation

The JET 2019–2020 scientific and technological programme exploited the results of years of concerted scientific and engineering work, including the ITER-like wall (ILW: Be wall and W divertor) installed in 2010, improved diagnostic capabilities now fully available, a major neutral beam injection upgrade providing record power in 2019–2020, and tested the technical and procedural preparation for safe operation with tritium. Research along three complementary axes yielded a wealth of new results. Firstly, the JET plasma programme delivered scenarios suitable for high fusion power and alpha particle (α) physics in the coming D–T campaign (DTE2), with record sustained neutron rates, as well as plasmas for clarifying the impact of isotope mass on plasma core, edge and plasma-wall interactions, and for ITER pre-fusion power operation. The efficacy of the newly installed shattered pellet injector for mitigating disruption forces and runaway electrons was demonstrated. Secondly, research on the consequences of long-term exposure to JET-ILW plasma was completed, with emphasis on wall damage and fuel retention, and with analyses of wall materials and dust particles that will help validate assumptions and codes for design and operation of ITER and DEMO. Thirdly, the nuclear technology programme aiming to deliver maximum technological return from operations in D, T and D–T benefited from the highest D–D neutron yield in years, securing results for validating radiation transport and activation codes, and nuclear data for ITER