Origin of molecular oxygen in Comet 67P/Churyumov-Gerasimenko

Molecular oxygen has been detected in the coma of comet 67P/Churyumov-Gerasimenko with abundances in the 1-10% range by the ROSINA-DFMS instrument on board the Rosetta spacecraft. Here we find that the radiolysis of icy grains in low-density environments such as the presolar cloud may induce the production of large amounts of molecular oxygen. We also show that molecular oxygen can be efficiently trapped in clathrates formed in the protosolar nebula, and that its incorporation as crystalline ice is highly implausible because this would imply much larger abundances of Ar and N2 than those observed in the coma. Assuming that radiolysis has been the only O2 production mechanism at work, we conclude that the formation of comet 67P/Churyumov-Gerasimenko is possible in a dense and early protosolar nebula in the framework of two extreme scenarios: (1) agglomeration from pristine amorphous icy grains/particles formed in ISM and (2) agglomeration from clathrates that formed during the disk's cooling. The former scenario is found consistent with the strong correlation between O2 and H2O observed in 67P/C-G's coma while the latter scenario requires that clathrates formed from ISM icy grains that crystallized when entering the protosolar nebula.Comment: The Astrophysical Journal Letters, in pres

Homeopathie bij rundvee: een verkenning van behandelingen, succesfactoren en patroonherkenning in het kader van Bioveem

Het doel van dit onderzoek is om, d.m.v. interviews, ervaringen van veehouders over hun gebruik van homeopathie bij rundvee te verzamelen en te evalueren vanuit een ‘ervaringswetenschappelijke’ invalshoek. Hierdoor kan een verkennend overzicht verkregen worden van veelbelovende homeopathische middelen (hoofdstuk 3) waarmee intensiever toetsend en experimenteel casuïstisch effectonderzoek zou kunnen plaatsvinden. Ook kan een beeld ontstaan van succesfactoren bij het gebruik van homeopathie door de veehouders zelf (4.1) en van de risico’s en voordelen bij het gebruik van homeopathie (4.2). Het doel is verder om inzicht te krijgen in de rol van patroonherkenning bij rundveehouders rondom het gebruik van homeopathie en de evaluatie van de werking ervan (4.3)

Flexible In-Ga-Zn-O based circuits with two and three metal layers: simulation and fabrication study

The quest for high-performance flexible circuits call for scaling of the minimum feature size in Thin-Film Transistors (TFTs). Although reduced channel lengths can guarantee an improvement in the electrical properties of the devices, proper design rules also play a crucial role to minimize parasitics when designing fast circuits. In this letter, systematic Computer-Aided Design (CAD) simulations have guided the fabrication of highperformance flexible operational amplifiers (opamps) and logic circuits based on Indium-Gallium-Zinc-Oxide (IGZO) TFTs. In particular, the performance improvements due to the use of an additional third metal layer for the interconnections has been estimated for the first time. Encouraged by the simulated enhancements resulting by the decreased parasitic resistances and capacitances, both TFTs and circuits have been realized on a free-standing 50μm thick polymide foil using three metal layers. Despite the thicker layer stack, the TFTs have shown mechanical stability down to 5mm bending radii. Moreover, the opamps and the logic circuits have yielded improved electrical performance with respect to the architecture with two metal layers: gainbandwidth- product (GBWP) increased by 16:9%, for the first one, and propagation delay (tpd) decreased by 43%, for the latter one

Radio frequency electronics on plastic

In this paper the recent progress of active high frequency electronics on plastic is discussed. This technology is mechanically flexible, bendable, stretchable and does not need any rigid chips. Indium Gallium Zinc Oxide (IGZO) technology is applied. At 2 V supply and gate length of 0.5 μm, the thin-film transistors (TFTs) yield a measured transit frequency of 138 MHz. Our scalable TFT compact simulation model shows good agreement with measurements. To achieve a sufficiently high yield, TFTs with gate lengths of around 5 μm are used for the circuit design. A Cherry Hopper amplifier with 3.5 MHz bandwidth, 10 dB gain and 5 mW dc power is presented. The fully integrated receiver covering a plastic foil area of 3 × 9 mm2 includes a four stage cascode amplifier, an amplitude detector, a baseband amplifier and a filter. At a dc current of 7.2 mA and a supply of 5 V, a bandwidth of 2 - 20 MHz and a gain beyond 15 dB were measured. Finally, an outlook regarding future advancements of high frequency electronics on plastic is given

Formality and informality in the summative assessment of motor vehicle apprentices: a case study

This article explores the interaction of formal and informal attributes of competence‐based assessment. Specifically, it presents evidence from a small qualitative case study of summative assessment practices for competence‐based qualifications within apprenticeships in the motor industry in England. The data are analysed through applying an adaptation of a framework for exploring the interplay of formality and informality in learning. This analysis reveals informal mentoring as a significant element which influences not only the process of assessment, but also its outcomes. We offer different possible interpretations of the data and their analysis, and conclude that, whichever interpretation is adopted, there appears to be a need for greater capacity‐building for assessors at a local level. This could acknowledge a more holistic role for assessors; recognise the importance of assessors’ informal practices in the formal retention and achievement of apprentices; and enhance awareness of inequalities that may be reinforced by both informal and formal attributes of assessment practices

Studies of Vibrational Properties in Ga Stabilized d-Pu by Extended X-ray Absorption Fine Structure

Temperature dependent extended x-ray absorption fine structure (EXAFS) spectra were measured for a 3.3 at% Ga stabilized Pu alloy over the range T= 20 - 300 K at both the Ga K-edge and the Pu L_III-edge. The temperature dependence of the pair-distance distribution widths, \sigma(T) was accurately modeled using a correlated-Debye model for the lattice vibrational properties, suggesting Debye-like behavior in this material. We obtain pair- specific correlated-Debye temperatures, \Theta_cD, of 110.7 +/- 1.7 K and 202.6 +/- 3.7 K, for the Pu-Pu and Ga-Pu pairs, respectively. These results represent the first unambiguous determination of Ga-specific vibrational properties in PuGa alloys, and indicate the Ga-Pu bonds are significantly stronger than the Pu-Pu bonds. This effect has important implications for lattice stabilization mechanisms in these alloys.Comment: 7 pages, 4 figures, Phys. Rev. B in pres