Electric-field control of spin waves at room temperature in multiferroic BiFeO3

To face the challenges lying beyond current CMOS-based technology, new paradigms for information processing are required. Magnonics proposes to use spin waves to carry and process information, in analogy with photonics that relies on light waves, with several advantageous features such as potential operation in the THz range and excellent coupling to spintronics. Several magnonic analog and digital logic devices have been proposed, and some demonstrated. Just as for spintronics, a key issue for magnonics is the large power required to control/write information (conventionally achieved through magnetic fields applied by strip lines, or by spin transfer from large spin-polarized currents). Here we show that in BiFeO3, a room-temperature magnetoelectric material, the spin wave frequency (>600 GHz) can be tuned electrically by over 30%, in a non-volatile way and with virtually no power dissipation. Theoretical calculations indicate that this effect originates from a linear magnetoelectric effect related to spin-orbit coupling induced by the applied electric field. We argue that these properties make BiFeO3 a promising medium for spin wave generation, conversion and control in future magnonics architectures.Comment: 3 figure

Single point incremental forming: An assessment of the progress and technology trends from 2005 to 2015

The last decade has seen considerable interest in flexible forming processes. Among the upcoming flexible forming techniques, one that has captured a lot of interest is single point incremental forming (SPIF), where a flat sheet is incrementally deformed into a desired shape by the action of a tool that follows a defined toolpath conforming to the final part geometry. Research on SPIF in the last ten years has focused on defining the limits of this process, understanding the deformation mechanics and material behaviour and extending the process limits using various strategies. This paper captures the developments that have taken place over the last decade in academia and industry to highlight the current state of the art in this field. The use of different hardware platforms, forming mechanics, failure mechanism, estimation of forces, use of toolpath and tooling strategies, development of process planning tools, simulation of the process, aspects of sustainable manufacture and current and future applications are individually tracked to outline the current state of this process and provide a roadmap for future work on this process

An Improved Metallicity Calibration with UBV Photometry

We used the data of 701 stars covering the colour index interval 0.32<B-V<=1.16, with metallicities -1.76<=[Fe/H]<=+0.40 dex, which were taken from PASTEL catalogue and estimated metallicity dependent guillotine factors which provide a more accurate metallicity calibration. We reduced the metallicities of 11 authors to the metallicities of Valenti & Fischer (2005), thus obtained a homogeneous set of data which increased the accuracy of the calibration, i.e. [Fe/H]=-14.316*delta^{2}_{0.6}-3.557*delta_{0.6}+0.105. Comparison of the metallicity residuals, for two sets of data, based on the metallicity dependent guillotine factors with the ones obtained via metal free guillotine factors, shows that metallicities estimated by means of new guillotine factors are more accurate than the other ones. This advantage can be used in the metallicity gradient investigation of the Galactic components, i.e. thin disc, thick disc and halo.Comment: 12 pages, including 10 figures and 6 tables, accepted for publication in PAS

Characterization and Evaluation of Layered Bi2WO6 Nanosheets as a New Antibacterial Agent

Background: Pathogenic microorganisms are causing increasing cases of mortality and morbidity, along with alarming rates of ineffectiveness as a result of acquired antimicrobial resistance. Bi2WO6 showed good potential to be used as an antibacterial substance when exposed to visible light. This study demonstrates for the first time the dimension-dependent antibacterial activity of layered Bi2WO6 nanosheets. Materials and methods: The synthesized layered Bi2WO6 nanosheets were prepared by the hydrothermal method and characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and Raman and Fourier transform infrared spectroscopy (FTIR). Antibacterial and antibiotic-modulation activities were performed in triplicate by the microdilution method associated with visible light irradiation (LEDs). Results: Bi2WO6 nanosheets were effective against all types of bacteria tested, with MIC values of 256 µg/mL against Escherichia coli standard and resistant strains, and 256 µg/mL and 32 µg/mL against Staphylococcus aureus standard and resistant strains, respectively. Two-dimensional (2D) Bi2WO6 nanosheets showed antibacterial efficiency against both strains studied without the presence of light. Conclusions: Layered Bi2WO6 nanosheets revealed dimension-dependent antibacterial activity of the Bi2WO6 system.The authors thank Conselho Nacional de Desenvolvimento Científico e Tecnológico— CNPq, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—CAPES, and Fundação Cearense de Apoio ao Desenvolvimento Científico e Tecnológico—FUNCAP (Proc. BP4-00172-00232.01.00/20 and Proc. PR2-0101-00006.01.00/15) for the financial support. The authors would also like to thank the educational institutions UFCA, URCA, and UNILEÃO for their support during the experiments

Distribution of Corbicula fluminea (Müller, 1774) in the invaded range: a geographic approach with notes on species traits variability

Corbicula fluminea is considered one of the most important non-native invasive species (NIS) in aquatic systems mainly due to its widespread distribution and ecological and economic impacts. This species is known to negatively affect native bivalves, also with severe effects on biodiversity and ecosystem functioning. Throughout an exhaustive bibliographic survey and with the aid of Geographic Information Systems tools, this study tracks the species dispersion from its native range, including the description of important physical and environmental barriers. Additional analyses were conducted to examine possible influences of latitudinal/ temperature gradients on important traits (e.g. life span, maximum and mean body length, growth at the end of first year). Altitude and winter minimum temperature appear to be delaying the invasion worldwide, but it seems inevitable that the species will spread across the globe. Latitude and summer temperature show a relationship with growth and life span. Overall, the information gathered in this review may be relevant to forecast future distribution patterns of this NIS, and to anticipate the possible implementation of effective management measures. Moreover, it may constitute a valuabletool inthe prediction of population responses to an increasingly changing environment.This research was supported by FCT (Portuguese Foundation for Science and Technology), through a PhD grant attributed to D. Crespo (SFRH/BD/80252/2011), a post-doc grant attributed to S. Leston (SFRH/BPD/91828/2012) and M Dolbeth (SFRH/BPD/41117/2007) and BIOCHANGED project (PTDC/MAR/111901/2009), subsidized by the European Social Fund and MCTES (Ministério da Ciência, Tecnologia e Ensino Superior) National Funds, through the POPH (Human Potential Operational Programme), QREN (National Strategic Reference Framework) and COMPETE (Programa Operacional Factores de Competitividade).info:eu-repo/semantics/publishedVersio

Identification of a cytokine network sustaining neutrophil and Th17 activation in untreated early rheumatoid arthritis

© 2010 Cascão et al.; licensee BioMed Central Ltd. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.Introduction: Rheumatoid arthritis (RA) is a chronic inflammatory autoimmune disease characterized by sustained synovitis. Recently, several studies have proposed neutrophils and Th17 cells as key players in the onset and perpetuation of this disease. The main goal of this work was to determine whether cytokines driving neutrophil and Th17 activation are dysregulated in very early rheumatoid arthritis patients with less than 6 weeks of disease duration and before treatment (VERA). Methods: Cytokines related to neutrophil and Th17 activation were quantified in the serum of VERA and established RA patients and compared with other very early arthritis (VEA) and healthy controls. Synovial fluid (SF) from RA and osteoarthritis (OA) patients was also analyzed. Results: VERA patients had increased serum levels of cytokines promoting Th17 polarization (IL-1b and IL-6), as well as IL-8 and Th17-derived cytokines (IL-17A and IL-22) known to induce neutrophil-mediated inflammation. In established RA this pattern is more evident within the SF. Early treatment with methotrexate or corticosteroids led to clinical improvement but without an impact on the cytokine pattern. Conclusions: VERA patients already display increased levels of cytokines related with Th17 polarization and neutrophil recruitment and activation, a dysregulation also found in SF of established RA. 0 Thus, our data suggest that a cytokine-milieu favoring Th17 and neutrophil activity is an early event in RA pathogenesis.This work was supported by a grant from Sociedade Portuguesa de Reumatologia/Schering-Plough 2005. RAM and RC were funded by Fundação para a Ciência e a Tecnologia (FCT) SFRH/BD/30247/2006 and SFRH/BD/40513/2007, respectively. MMS-C was funded by Marie Curie Intra-European Fellowship PERG-2008-239422 and a EULAR Young Investigator Award

The influence of semantic and phonological factors on syntactic decisions: An event-related brain potential study

During language production and comprehension, information about a word's syntactic properties is sometimes needed. While the decision about the grammatical gender of a word requires access to syntactic knowledge, it has also been hypothesized that semantic (i.e., biological gender) or phonological information (i.e., sound regularities) may influence this decision. Event-related potentials (ERPs) were measured while native speakers of German processed written words that were or were not semantically and/or phonologically marked for gender. Behavioral and ERP results showed that participants were faster in making a gender decision when words were semantically and/or phonologically gender marked than when this was not the case, although the phonological effects were less clear. In conclusion, our data provide evidence that even though participants performed a grammatical gender decision, this task can be influenced by semantic and phonological factors

Determinants of Salivary Cotinine among Smokeless Tobacco Users : A Cross-Sectional Survey in Bangladesh

INTRODUCTION: More than 80% of all smokeless tobacco (ST) products in the world are consumed in South Asia; yet little is known about their consumption behaviour, addictiveness, and toxic properties. This paper, for the first time, describes associations between salivary cotinine concentrations among ST users in Bangladesh and their socio-demographic characteristics and tobacco use behaviours. METHODS: In a survey of ST users in Dhaka, Bangladesh, we purposively recruited 200 adults who were non-smokers but consumed ST on a regular basis. In-person interviews were conducted to obtain information about socio-demographic and ST use behaviours, and saliva samples were collected to measure cotinine concentration. Simple and multiple linear regression analyses were conducted to test associations between the log transformed salivary cotinine concentration and other study variables. RESULTS: The geometric mean of cotinine concentration among ST users was 380ng/ml (GSD:2). Total duration of daily ST use in months had a statistically significant association with cotinine concentration. Other ST use characteristics including type and quantity of ST use, swallowing of tobacco juice, urges and strength of urges and attempts to cut down on tobacco use were not found to be associated with cotinine concentration in a multivariable model. CONCLUSION: This is the first report from Bangladesh studying cotinine concentration among ST users and it points towards high levels of addiction. This warrants effective tobacco control policies to help ST cessation and prevention

Addressing the evolution of automated user behaviour patterns by runtime model interpretation

The final publication is available at Springer via http://dx.doi.org/10.1007/s10270-013-0371-3The use of high-level abstraction models can facilitate and improve not only system development but also runtime system evolution. This is the idea of this work, in which behavioural models created at design time are also used at runtime to evolve system behaviour. These behavioural models describe the routine tasks that users want to be automated by the system. However, users¿ needs may change after system deployment, and the routine tasks automated by the system must evolve to adapt to these changes. To facilitate this evolution, the automation of the specified routine tasks is achieved by directly interpreting the models at runtime. This turns models into the primary means to understand and interact with the system behaviour associated with the routine tasks as well as to execute and modify it. Thus, we provide tools to allow the adaptation of this behaviour by modifying the models at runtime. This means that the system behaviour evolution is performed by using high-level abstractions and avoiding the costs and risks associated with shutting down and restarting the system.This work has been developed with the support of MICINN, under the project EVERYWARE TIN2010-18011, and the support of the Christian Doppler Forschungsgesellschaft and the BMWFJ, Austria.Serral Asensio, E.; Valderas Aranda, PJ.; Pelechano Ferragud, V. (2013). Addressing the evolution of automated user behaviour patterns by runtime model interpretation. Software and Systems Modeling. https://doi.org/10.1007/s10270-013-0371-3SWeiser, M.: The computer of the 21st century. Sci. Am. 265, 66–75 (1991)Serral, E., Valderas, P., Pelechano, V.: Context-adaptive coordination of pervasive services by interpreting models during runtime. Comput. J. 56(1), 87–114 (2013)Ajila, S.A., Alam, S.: Using a formal language constructs for software model evolution. In: Third IEEE International Conference on Semantic Computing (IEEE-ICSC 2009). Berkeley, CA, USA, pp. 390–395 (2009)Bennett, K., Rajlich, V.: Software Maintenance and Evolution: A Roadmap. In: 22nd International Conference on Software Engineering (ICSE 2000). Limerick, Ireland, pp. 75–87 (2000)Mens, T.: The ERCIM working group on software evolution: the past and the future. In: Proceedings of the Joint International and Annual ERCIM Workshops on Principles of Software Evolution (IWPSE) and Software Evolution (Evol) Workshops. ACM (2009)Mens, T., Wermelinger, M., Ducasse, S., Demeyer, S., Hirschfeld, R.: Challenges in software evolution. In: Report of the ChaSE 2005 Workshop Organised by the ERCIM Working Group on Software Evolution. IWPSE-05. Lisbon, Portugal, pp. 13–22 (2005)Hirschfeld, R., Kawamura, K., Berndt, H.: Dynamic service adaptation for runtime system extensions. In: Wireless On-Demand Network Systems, pp. 227–240. Springer, Berlin, Heidelberg, Madonna di Campiglio, Italy (2004)Lientz, B.P., Swanson, E.B.: Software maintenance management: a study of the maintenance of computer applications software in 487 data processing organizations. Addison-Wesley, Reading, MA (1980)Buckley, J., Mens, T., Zenger, M., Rashid, A., Kniesel, G.: Towards a taxonomy of software change. J. Softw. Maint. Evolut. Res. Pract. 17(5), 309–332 (2003)Hardian, B., Indulska, J., Henricksen, K.: Balancing autonomy and user control in context-aware systems—a survey. In: CoMoRea, IEEE PerCom Workshops 2006. (2006)Biegel, G., Cahill, V.: A framework for developing mobile, context-aware applications. In: The 2nd IEEE Conference on Pervasive Computing and Communication (PerCom), pp. 361–365 (2004)Hofer, T., Schwinger, W., Pichler, M., Leonhartsberger, G., Altmann, J.: Context-awareness on mobile devices—the hydrogen approach. In: The 36th Annual Hawaii International Conference on System Sciences, pp. 292–302 (2002)Dey, A.K.: Understanding and using context. Pers. Ubiquitous Comput. 5(1), 4–7 (2001)Sheng, Q.Z., Benatallah, B.: ContextUML: a UML-based modelling language for model-driven development of context-aware web services. In: Proceedings of the International Conference on Mobile, Business (ICMB’05). pp. 206–212 (2005)Henricksen, K., Indulska, J.: A software engineering framework for context-aware pervasive computing. In: Proceedings of the Second IEEE Annual Conference on Pervasive Computing and Communications (PerCom 2004), pp. 77–86. IEEE, Orlando, FL, USA (2004)Baldauf, M., Dustdar, S., Rosenberg, F.: A survey on context-aware systems. Int. J. Ad Hoc Ubiquitous Comput. 2(4), 263–277 (2007)Ye, J., Coyle, L., Dobson, S., Nixon, P.: Ontology-based models in pervasive computing systems. Knowl. Eng. Rev. 22(4), 315–347 (2007)Chen, H., Finin, T., Joshi, A.: An ontology for context-aware pervasive computing environments. Special Issue on Ontologies for Distributed Systems. Knowl. Eng. Rev. 18(3), 197–207 (2004)Welty, C., McGuinness, D.L.: OWL Web Ontology Language Guide. vol. W3C Recomm. W3C Recommendation 10 Feb 2004 (2004)Shepherd, A.: HTA as a framework for task analysis. Ergonomics 41, 1537–1552 (1998)Serral, E., Valderas, P., Pelechano, V.: Towards the model driven development of context-aware pervasive systems. Special Issue on Context Modelling, Reasoning and Management. PMC 6(2), 254–280 (2010)Serral, E.: Automating Routine Tasks in Smart Environments. A Context-aware Model-driven Approach, Technical University of Valencia (2011)Mellor, S.J., Balcer, M.J.: Executable UML: A Foundation for Model Driven Architecture. Addison-Wesley, Indianapolis (2002)Muñoz, J., Ferragud, D.V.P.: Model Driven Development of Pervasive Systems. Building a Software Factory. Universidad Politécnica de Valencia, Valencia (2008)Juric, M.B., Sarang, P.: Business Process Execution Language for Web Services: BPEL and BPEL4WS (2006)Loke, S.W., Smanchat, S., Ling, S., Indrawan, M.: Formal mirror models: an approach to just-in-time reasoning for device ecologies. Int. J. Smart Home 2(1), 15–32 (2008)Code Generation conference. http://www.codegeneration.net/cg2010/ (2010)Guy, M.: Report 2: API Good Practice Good practice for provision of and consuming APIs. UKOLN (2009)Bloch, J.: How to design a good API and why it matters. pp. 506–507 (2005)Sirin, E., Parsia, B., Grau, B.C., Kalyanpur, A., Katz, Y.: Pellet: A practical OWL-DL reasoner. J. Web Semant. 5(2), 51–53 (2007)Bernstein, P.: Multiversion concurrency control—theory and algorithms. ACM Trans. Database Syst. 8(4), 465–484 (1983)Cooper, S., Dann, W., Pausch, R.: Alice: a 3-D tool for introductory programming concepts. J. Comput. Sci. Coll. 15, 107–116 (2000)Pérez, F., Valderas, P.: Allowing end-users to actively participate within the elicitation of pervasive system requirements through immediate visualization. In: Fourth International Workshop on Requirements Engineering Visualization (REV), pp. 31–40. IEEE, Atlanta, Georgia, USA (2009)Lieberman, H., Paternó, F., Wulf, V.: End User Development. Springer, Dordrecht (2006)Nielsen, J.: Usability Engineering. Morgan Kaufmann Publishers Inc, San Francisco (1993)Van Welie, M., Trætteberg, H.: Interaction Patterns in User, Interfaces. pp. 13–16 (2000)Galitz, W.O.: The Essential Guide to User Interface Design: An Introduction to GUI Design Principles and Techniques. Wiley, New York (2002)Kitchenham, B., Pickard, L., Pfleeger, S.L.: Case studies for method and tool evaluation. Softw. IEEE 12(4), 52–62 (1995)Wohlin, C., Runeson, P., Höst, M., Ohlsson, M.C., Regnell, B., Wesslén, A.: Experimentation in Software Engineering. Springer, Berlin (2012)Jones, J.V.: Applied software measurement: assuring productivity & quality (2nd ed’97). McGraw-Hill, New York (1997)Strang, T., Linnhoff-Popien, C.: A context modeling survey. In: First International Workshop on Advanced Context Modelling, Reasoning And Management at UbiComp (2004)Lewis, J.R.: Psychometric Evaluation of an After-Scenario Questionnaire for Computer Usability Studies? The ASQ. SIGCHI Bulletin (1991)Cook, D.J., Youngblood, M., Heierman, I.I.I.E.O., Gopalratnam, K., Rao, S., Litvin, A., Khawaja, F.: MavHome: An Agent-based Smart Home. In: First IEEE International Conference on Pervasive Computing and, Communications (PerCom’03), pp. 521–524 (2003)Hagras, H., Callaghan, V., Colley, M., Clarke, G., Pounds-Cornish, A., Duman, H.: Creating an ambient-intelligence environment using embedded agents. IEEE Intell. Syst. 19(6), 12–20 (2004)Rashidi, P., Cook, D.J.: Keeping the resident in the loop: adapting the smart home to the user. IEEE Trans. Syst. Man Cybern. 39(5), 949–959 (2009)Webb, G.I., Pazzani, M.J., Billsus, D.: Machine learning for user modeling. User model. User-Adapt Interact. 11(1–2), 19–29 (2001)Valiant, L.G.: A theory of the learnable. Commun. ACM 27(11), 1134–1142 (1984)Serral, E., Valderas, P., Pelechano, V.: (2011) Improving the cold-start problem in user task automation by using models at runtime. In: Information Systems Development, pp. 671–683. (2011)García-Herranz, M., Haya, P.A., Esquivel, A., Montoro, G., Alamán, X.: Easing the smart home: semi-automatic adaptation in perceptive environments. J. Univers. Comput. Sci. 14(9), 1529–1544 (2008)Henricksen, K., Indulska, J., Rakotonirainy, A.: Using context and preferences to implement self-adapting pervasive computing applications. Sofw. Pract. Exp. 36(11–12), 1307–1330 (2006)Johnson, P.: Tasks and situations: considerations for models and design principles in human computer interaction, pp. 1199–1204. HCI International. Munich, Germany (1999)Cook, D.J., Das, S.K.: Smart environments: technologies, protocols, and applications, vol. 43. Wiley-Interscience, New York (2005)Paternò, F.: ConcurTaskTrees: an Engineered approach to model-based design of interactive systems. In: The Handbook of Analysis for Human-Computer Interaction, pp. 483–500 (2002)Pribeanu, C., Limbourg, Q., Vanderdonckt1, J.: Task modelling for context-sensitive user interfaces. In: Interactive Systems: Design, Specification, and Verification (DSV-IS), pp. 49–68. Springer, Berlin, Heidelberg 2001, Glasgow, Scotland, UK (2001)Souchon, N., Limbourg, Q., Vanderdonckt., J.: Task modelling in multiple contexts of use. In: Interactive Systems: Design, Specification, and Verification (DSV-IS), pp. 59–73 (2002)Huang, R., Cao, Q., Zhou, J., Sun, D., Su, Q.: Context-aware active task discovery for pervasive computing. In: International Conference on Computer Science and Software Engineering, pp. 463–466. IEEE, Wuhan, China (2008)Sousa, J.P., Poladian, V., Garlan, D., Schmerl, B.: Task-based adaptation for ubiquitous computing. IEEE Trans. Syst. Man Cybern. 36(3), 328–340 (2006)Masuoka, R., Parsia, B., Labrou, Y.: Task Computing—The Semantic Web Meets Pervasive Computing. In: 2nd International Semantic Web Conference on the Semantic Web (ISWC 2003), pp. 866–881. vol. LNCS 2870. Sanibel Island, FL, USA (2003)Oreizy, P., Gorlick, M.M., Taylor, R.N., Heimbigner, D., Johnson, G., Medvidovic, N., Quilici, A., Rosenblum, D.S., Wolf, A.L.: An architecture-based approach to self-adaptive software. IEEE Intell. Syst. Their Appl. 14(3), 54–62 (1999)Floch, J., Hallsteinsen, S., Stav, E., Eliassen, F., Lund, K., Gjørven, E.: Using Architecture Models for Runtime Adaptability. IEEE Software. 23(2), 62–70 (2006)Morin, B., Jézéquel, J.-M., Fleurey, F., Solberg, A.: Models at runtime to support dynamic adaptation. IEEE Comput. Soc. pp. 46–53 (2009)Cetina, C., Giner, P., Fons, J., Pelechano, V.: Using feature models for developing self-configuring smart homes. In: Fifth International Conference on Autonomic and Autonomous Systems, pp. 179–188. IEEE, Valencia, Spain (2009)Garlan, D., Schmerl, B.: Using architectural models at runtime: research challenges. In: Proceedings of the European Workshop on Software Architectures, pp. 200–205. Springer, Berlin, Heidelberg, St Andrews, UK (2004)Blumendorf, M., Lehmann, G., Feuerstack, S., Albayrak, S.: Executable models for human-computer interaction. In: Interactive Systems, Design, Specification, and Verification Workshop (DSV-IS 2008), pp. 238–251. Springer Berlin Heidelberg, Kingston, Canada (2008)Ballagny, C., Hameurlain, N., Barbier, F.: MOCAS: a state-based component model for self-adaptation. In: Third IEEE International Conference on Self-Adaptive and Self-Organizing Systems, pp. 206–215. IEEE, San Francisco, California (2009)Amoui, M., Derakhshanmanesh, M., Ebert, J., Tahvildari, L.: Achieving dynamic adaptation via management and interpretation of runtime models. J. Syst. Softw. 85(12), 2720–2737 (2012)Blair, G., Bencomo, N., France, R.B.: [email protected]. IEEE Comput. 42, 22–27 (2009)Zhang, J., Cheng, B.H.C.: Model based development of dynamically adaptive software. In: International Conference on Software Engineering (ICSE’06), pp. 371–380. ACM, Shanghai, China (2006