86 research outputs found

    Clinicopathological evidence that neovascularisation is a cause of recurrent varicose veins

    Get PDF
    Objectives:Recurrent varicose veins may result from poor initial surgical technique or progression of varicosities in collateral veins. In some cases new veins may develop at the saphenofemoral junction (neovascularisation) and cause recurrent saphenofemoral incompetence. This was a histological study of recurrent varicose veins.Design:This clinicopathological study included 20 patients (median age 55 years) who had surgery for recurrent saphenofemoral incompetence.Materials and methods:A total of 28 legs had groin re-exploration with repeat flush saphenofemoral ligation. The venous tissue block from the saphenofemoral region (including the proximal thigh varicosity) was excised and orientated for histological analysis. Evidence of neovascularisation was sought using routine histological sections and S100 immunohistochemistry.Results:At operation, thin-walled, serpentine neovascular veins were detected clinically as the principal cause of recurrence in 19 groins. In five groins recurrence was due to a residual missed vein at the saphenofemoral junction, and in four recurrence was caused by cross groin collaterals. On histological sections, evidence of neovascularisation was present in 27 of 28 groins. In eight it co-existed with the veins missed at the original operation but it was the sole identified cause of recurrent saphenofemoral incompetence in 19 (68%) groins.Conclusions:Neovascularisation was the principal cause of recurrent saphenofemoral incompetence in this series

    Interacting Multiple Try Algorithms with Different Proposal Distributions

    Get PDF
    We propose a new class of interacting Markov chain Monte Carlo (MCMC) algorithms designed for increasing the efficiency of a modified multiple-try Metropolis (MTM) algorithm. The extension with respect to the existing MCMC literature is twofold. The sampler proposed extends the basic MTM algorithm by allowing different proposal distributions in the multiple-try generation step. We exploit the structure of the MTM algorithm with different proposal distributions to naturally introduce an interacting MTM mechanism (IMTM) that expands the class of population Monte Carlo methods. We show the validity of the algorithm and discuss the choice of the selection weights and of the different proposals. We provide numerical studies which show that the new algorithm can perform better than the basic MTM algorithm and that the interaction mechanism allows the IMTM to efficiently explore the state space

    Measurement of the p-pbar -> Wgamma + X cross section at sqrt(s) = 1.96 TeV and WWgamma anomalous coupling limits

    Full text link
    The WWgamma triple gauge boson coupling parameters are studied using p-pbar -> l nu gamma + X (l = e,mu) events at sqrt(s) = 1.96 TeV. The data were collected with the DO detector from an integrated luminosity of 162 pb^{-1} delivered by the Fermilab Tevatron Collider. The cross section times branching fraction for p-pbar -> W(gamma) + X -> l nu gamma + X with E_T^{gamma} > 8 GeV and Delta R_{l gamma} > 0.7 is 14.8 +/- 1.6 (stat) +/- 1.0 (syst) +/- 1.0 (lum) pb. The one-dimensional 95% confidence level limits on anomalous couplings are -0.88 < Delta kappa_{gamma} < 0.96 and -0.20 < lambda_{gamma} < 0.20.Comment: Submitted to Phys. Rev. D Rapid Communication

    Measurement of the ttbar Production Cross Section in ppbar Collisions at sqrt{s} = 1.96 TeV using Kinematic Characteristics of Lepton + Jets Events

    Get PDF
    We present a measurement of the top quark pair ttbar production cross section in ppbar collisions at a center-of-mass energy of 1.96 TeV using 230 pb**{-1} of data collected by the DO detector at the Fermilab Tevatron Collider. We select events with one charged lepton (electron or muon), large missing transverse energy, and at least four jets, and extract the ttbar content of the sample based on the kinematic characteristics of the events. For a top quark mass of 175 GeV, we measure sigma(ttbar) = 6.7 {+1.4-1.3} (stat) {+1.6- 1.1} (syst) +/-0.4 (lumi) pb, in good agreement with the standard model prediction.Comment: submitted to Phys.Rev.Let

    Measurement of the ttbar Production Cross Section in ppbar Collisions at sqrt(s)=1.96 TeV using Lepton + Jets Events with Lifetime b-tagging

    Get PDF
    We present a measurement of the top quark pair (ttˉt\bar{t}) production cross section (σttˉ\sigma_{t\bar{t}}) in ppˉp\bar{p} collisions at s=1.96\sqrt{s}=1.96 TeV using 230 pb1^{-1} of data collected by the D0 experiment at the Fermilab Tevatron Collider. We select events with one charged lepton (electron or muon), missing transverse energy, and jets in the final state. We employ lifetime-based b-jet identification techniques to further enhance the ttˉt\bar{t} purity of the selected sample. For a top quark mass of 175 GeV, we measure σttˉ=8.61.5+1.6(stat.+syst.)±0.6(lumi.)\sigma_{t\bar{t}}=8.6^{+1.6}_{-1.5}(stat.+syst.)\pm 0.6(lumi.) pb, in agreement with the standard model expectation.Comment: 7 pages, 2 figures, 3 tables Submitted to Phys.Rev.Let

    Measurement of the ratios of the Z/G* + >= n jet production cross sections to the total inclusive Z/G* cross section in ppbar collisions at sqrt(s) = 1.96 TeV

    Get PDF
    We present a study of events with Z bosons and jets produced at the Fermilab Tevatron Collider in ppbar collisions at a center of mass energy of 1.96 TeV. The data sample consists of nearly 14,000 Z/G* -> e+e- candidates corresponding to the integrated luminosity of 0.4 fb-1 collected using the D0 detector. Ratios of the Z/G* + >= n jet cross sections to the total inclusive Z/G* cross section have been measured for n = 1 to 4 jet events. Our measurements are found to be in good agreement with a next-to-leading order QCD calculation and with a tree-level QCD prediction with parton shower simulation and hadronization.Comment: 7 pages, 2 figures, slightly modified, submitted to Phys. Lett.

    Measurement of the Isolated Photon Cross Section in p-pbar Collisions at sqrt{s}=1.96 TeV

    Get PDF
    The cross section for the inclusive production of isolated photons has been measured in p anti-p collisions at sqrt{s}=1.96 TeV with the D0 detector at the Fermilab Tevatron Collider. The photons span transverse momenta 23 to 300 GeV and have pseudorapidity |eta|<0.9. The cross section is compared with the results from two next-to-leading order perturbative QCD calculations. The theoretical predictions agree with the measurement within uncertainties.Comment: 7 pages, 5 figures, submitted to Phys.Lett.

    Search for single top quark production in ppbar collisions at sqrt(s)=1.96 TeV

    Get PDF
    We present a search for electroweak production of single top quarks in the s-channel and t-channel using neural networks for signal-background separation. We have analyzed 230 pb1^{-1} of data collected with the D0 detector at the Fermilab Tevatron Collider at a center-of-mass energy of 1.96 TeV and find no evidence for a single top quark signal. The resulting 95% confidence level upper limits on the single top quark production cross sections are 6.4 pb in the s-channel and 5.0 pb in the t-channel.Comment: 9 pages, 4 figure

    Measurement of the WW production cross section in p anti-p collisions at s**(1/2) = 1.96 TeV

    Get PDF
    We present a measurement of the W boson pair-production cross section in p anti-p collisions at a center-of-mass energy of sqrt{s}=1.96 TeV. The data, collected with the Run II DO detector, correspond to an integrated luminosity of 224-252 pb^-1 depending on the final state (ee, emu or mumu). We observe 25 candidates with a background expectation of 8.1+/-0.6(stat)+/-0.6(syst)+/-0.5(lum) events. The probability for an upward fluctuation of the background to produce the observed signal is 2.3x10^-7, equivalent to 5.2 standard deviations.The measurement yields a cross section of 13.8+4.3/-3.8(stat)+1.2/-0.9(syst)+/-0.9(lum) pb, in agreement with predictions from the standard model.Comment: submitted to PR

    Measurement of the Lambda^0_b lifetime in the decay Lambda^0_b -> J/psi Lambda^0 with the D0 Detector

    Get PDF
    We present measurements of the Lambda^0_b lifetime in the exclusive decay channel Lambda^0_{b}->J/psi Lambda^0, with J/psi to mu+ mu- and Lambda^0 to p pi-, the B^0 lifetime in the decay B^0 -> J/psi K^0_S with J/psi to mu+ mu- and K^0_S to pi+ pi-, and the ratio of these lifetimes. The analysis is based on approximately 250 pb^{-1} of data recorded with the D0 detector in pp(bar) collisions at sqrt{s}=1.96 TeV. The Lambda^0_b lifetime is determined to be tau(Lambda^0_b) = 1.22 +0.22/-0.18 (stat) +/- 0.04 (syst) ps, the B^0 lifetime tau(B^0) = 1.40 +0.11/-0.10 (stat) +/- 0.03 (syst) ps, and the ratio tau(Lambda^0_b)/tau(B^0) = 0.87 +0.17/-0.14 (stat) +/- 0.03 (syst). In contrast with previous measurements using semileptonic decays, this is the first determination of the Lambda^0_b lifetime based on a fully reconstructed decay channel.Comment: 7 pages, 4 figures, Submitted to Physical Review Letters, v2: Added FNAL Pub-numbe
    corecore