Influence of Hydrodynamic Interactions on the Kinetics of Colloidal Particle's Adsorption

The kinetics of irreversible adsorption of spherical particles onto a flat surface is theoretically studied. Previous models, in which hydrodynamic interactions were disregarded, predicted a power-law behavior $t^{-2/3}$ for the time dependence of the coverage of the surface near saturation. Experiments, however, are in agreement with a power-law behavior of the form $t^{-1/2}$. We outline that, when hydrodynamic interactions are considered, the assymptotic behavior is found to be compatible with the experimental results in a wide region near saturation.Comment: 4 pages, 1 figures, Phys. Rev. Lett. (in press

Determination of structural parameters characterizing thin films by optical methods: A comparison between scanning angle reflectometry and optical waveguide lightmode spectroscopy

International audienceWe present a comparative study of the structural parameters characterizing thin macromolecular adsorbed films that are obtained from two optical techniques: optical waveguide lightmode spectroscopy ͑OWLS͒ and scanning angle reflectometry ͑SAR͒. We use polyelectrolyte multilayers and polyelectrolyte multilayers/protein films to perform this study. The comparison between the information obtained with the two methods is possible because the buildup of the polyelectrolyte multilayers is known to become substrate independent after the deposition of the first few polyelectrolyte layers. The analysis of the optical data requires usually to postulate a refractive index profile for the interface. Two profiles have been used: the homogeneous and isotropic monolayer and the bilayer profiles. When the refractive index profile of an adsorbed film is well approximated by a homogeneous and isotropic monolayer, as shown by using an analysis of the deposited films in terms of optical invariants, the two optical techniques lead to similar values for the film thickness and the optical mass. The situation is more complex in the case of the multilayers/protein films for which the calculated parameters can strongly depend upon the refractive index profile that is postulated to analyze the optical data. Whereas the optical mass and, to a lesser extent, the thickness seem fairly model independent for OWLS, they appear to be extremely sensitive to the model for SAR. For proteins deposited on top of the polyelectrolyte film, optical mass and protein thickness were found to be comparable when determined by OWLS and by SAR using the bilayer model. The data analysis of the SAR curves with the monolayer model leads to much larger and even physically unreasonable film thicknesses and optical masses. This was particularly noticeable for proteins having a large size ͑human serum albumin and fibrinogen͒, whereas both models lead to similar results for small sized proteins. By means of the different refractive index profiles, we show that great care must be taken in the physicochemical interpretation of the structural parameters determined by these optical techniques

Optimization of glycolipid synthesis in hydrophilic deep eutectic solvents

Glycolipids are considered an alternative to petrochemically based surfactants because they are non-toxic, biodegradable, and less harmful to the environment while having comparable surface-active properties. They can be produced chemically or enzymatically in organic solvents or in deep eutectic solvents (DES) from renewable resources. DES are non-flammable, non-volatile, biodegradable, and almost non-toxic. Unlike organic solvents, sugars are easily soluble in hydrophilic DES. However, DES are highly viscous systems and restricted mass transfer is likely to be a major limiting factor for their application. Limiting factors for glycolipid synthesis in DES are not generally well understood. Therefore, the influence of external mass transfer, fatty acid concentration, and distribution on initial reaction velocity in two hydrophilic DES (choline:urea and choline:glucose) was investigated. At agitation speeds of and higher than 60 rpm, the viscosity of both DES did not limit external mass transfer. Fatty acid concentration of 0.5 M resulted in highest initial reaction velocity while higher concentrations had negative effects. Fatty acid accessibility was identified as a limiting factor for glycolipid synthesis in hydrophilic DES. Mean droplet sizes of fatty acid-DES emulsions can be significantly decreased by ultrasonic pretreatment resulting in significantly increased initial reaction velocity and yield (from 0.15 ± 0.03 μmol glucose monodecanoate/g DES to 0.57 ± 0.03 μmol/g) in the choline: urea DES. The study clearly indicates that fatty acid accessibility is a limiting factor in enzymatic glycolipid synthesis in DES. Furthermore, it was shown that physical pretreatment of fatty acid-DES emulsions is mandatory to improve the availability of fatty acids

Adsorption of colloidal particles in the presence of external field

We present a new class of sequential adsorption models in which the adsorbing particles reach the surface following an inclined direction (shadow models). Capillary electrophoresis, adsorption in the presence of a shear or on an inclined substrate are physical manifestations of these models. Numerical simulations are carried out to show how the new adsorption mechanisms are responsible for the formation of more ordered adsorbed layers and have important implications in the kinetics, in particular modifying the jamming limit.Comment: LaTex file, 3 figures available upon request, to appear in Phys.Rev.Let

Mechanism Design in Social Networks

This paper studies an auction design problem for a seller to sell a commodity in a social network, where each individual (the seller or a buyer) can only communicate with her neighbors. The challenge to the seller is to design a mechanism to incentivize the buyers, who are aware of the auction, to further propagate the information to their neighbors so that more buyers will participate in the auction and hence, the seller will be able to make a higher revenue. We propose a novel auction mechanism, called information diffusion mechanism (IDM), which incentivizes the buyers to not only truthfully report their valuations on the commodity to the seller, but also further propagate the auction information to all their neighbors. In comparison, the direct extension of the well-known Vickrey-Clarke-Groves (VCG) mechanism in social networks can also incentivize the information diffusion, but it will decrease the seller's revenue or even lead to a deficit sometimes. The formalization of the problem has not yet been addressed in the literature of mechanism design and our solution is very significant in the presence of large-scale online social networks.Comment: In The Thirty-First AAAI Conference on Artificial Intelligence, San Francisco, US, 04-09 Feb 201

Basis States for Relativistic, Dynamically-Entangled Particles

In several recent papers on entanglement in relativistic quantum systems and relativistic Bell's inequalities, relativistic Bell-type two-particle states have been constructed in analogy to non-relativistic states. These constructions do not have the form suggested by relativistic invariance of the dynamics. Two relativistic formulations of Bell-type states are shown for massive particles, one using the standard Wigner spin basis and one using the helicity basis. The construction hinges on the use of Clebsch-Gordan coefficients of the Poincar\'e group to reduce the direct product of two unitary irreducible representations (UIRs) into a direct sum of UIRs.Comment: 19 pages, three tables, revte

The EOS CERES Global Cloud Mask

To detect long-term climate trends, it is essential to produce long-term and consistent data sets from a variety of different satellite platforms. With current global cloud climatology data sets, such as the International Satellite Cloud Climatology Experiment (ISCCP) or CLAVR (Clouds from Advanced Very High Resolution Radiometer), one of the first processing steps is to determine whether an imager pixel is obstructed between the satellite and the surface, i.e., determine a cloud 'mask.' A cloud mask is essential to studies monitoring changes over ocean, land, or snow-covered surfaces. As part of the Earth Observing System (EOS) program, a series of platforms will be flown beginning in 1997 with the Tropical Rainfall Measurement Mission (TRMM) and subsequently the EOS-AM and EOS-PM platforms in following years. The cloud imager on TRMM is the Visible/Infrared Sensor (VIRS), while the Moderate Resolution Imaging Spectroradiometer (MODIS) is the imager on the EOS platforms. To be useful for long term studies, a cloud masking algorithm should produce consistent results between existing (AVHRR) data, and future VIRS and MODIS data. The present work outlines both existing and proposed approaches to detecting cloud using multispectral narrowband radiance data. Clouds generally are characterized by higher albedos and lower temperatures than the underlying surface. However, there are numerous conditions when this characterization is inappropriate, most notably over snow and ice of the cloud types, cirrus, stratocumulus and cumulus are the most difficult to detect. Other problems arise when analyzing data from sun-glint areas over oceans or lakes over deserts or over regions containing numerous fires and smoke. The cloud mask effort builds upon operational experience of several groups that will now be discussed

Functional performance of mobile versus fixed bearing total knee prostheses: a randomised controlled trial

PURPOSE: The primary goal of this study was to assess the difference in active flexion between patients with a mobile versus a fixed bearing, cruciate retaining, and total knee arthroplasty. The study was designed as a randomised controlled multi-centre trial. METHODS: Participants were assigned to interventions by using block-stratified, random allocation. Outcome parameters were active flexion, passive flexion, and Knee Society Score (KSS). Outcome parameters were assessed preoperatively and at 3, 6, and 12 months postoperatively by an independent nurse. RESULTS: Ninety-two patients from one centre were included, 46 in each group. Active flexion was comparable for the two groups, 99.9° for the mobile bearing group and 101° for the fixed bearing group with a baseline controlled difference of 1.0 (95% CI −3.9 to 5.8, n.s.). The Clinical KSS was comparable between the two bearing groups (Mobile 90.0 vs. fixed 92.4, n.s.). The functional KSS showed a difference that was attributable to the stair climbing subscore, which showed a difference in favour of the fixed bearing design between preoperative and 3 months (7.3 point difference; 95% CI 2.3–12.5; P = 0.005) as well as 12 months (4.8 point difference; 95% CI 0.1–9.6; P = 0.045). CONCLUSIONS: There were no short-term differences in active flexion between fixed bearing and mobile bearing total knee arthroplasty. LEVEL OF EVIDENCE: I

Polyelectrolyte multilayer films with pegylated polypeptides as a new type of anti-microbial protection for biomaterials.

Adhesion of bacteria at the surface of implanted materials is the first step in microbial infection, leading to post-surgical complications. In order to reduce this adhesion, we show that poly(L-lysine)/poly(L-glutamic acid) (PLL/PGA) multilayers ending by several PLL/PGA-g-PEG bilayers can be used, PGA-g-PEG corresponding to PGA grafted by poly(ethylene glycol). Streaming potential and quartz crystal microbalance-dissipation measurements were used to characterize the buildup of these films. The multilayer films terminated by PGA and PGA-g-PEG were found to adsorb an extremely small amount of serum proteins as compared to a bare silica surface but the PGA ending films do not reduce bacterial adhesion. On the other hand, the adhesion of Escherichia coli bacteria is reduced by 72% on films ending by one (PLL/PGA-g-PEG) bilayer and by 92% for films ending by three (PLL/PGA-g-PEG) bilayers compared to bare substrate. Thus, our results show the ability of PGA-g-PEG to be inserted into multilayer films and to drastically reduce both protein adsorption and bacterial adhesion. This kind of anti-adhesive films represents a new and very simple method to coat any type of biomaterials for protection against bacterial adhesion and therefore limiting its pathological consequences.comparative studyevaluation studiesjournal articleresearch support, non-u.s. gov't2004 Mayimporte