46 research outputs found
Imaging the spotty surface of Betelgeuse in the H band
This paper reports on H-band interferometric observations of Betelgeuse made
at the three-telescope interferometer IOTA. We image Betelgeuse and its
asymmetries to understand the spatial variation of the photosphere, including
its diameter, limb darkening, effective temperature, surrounding brightness,
and bright (or dark) star spots. We used different theoretical simulations of
the photosphere and dusty environment to model the visibility data. We made
images with parametric modeling and two image reconstruction algorithms: MIRA
and WISARD. We measure an average limb-darkened diameter of 44.28 +/- 0.15 mas
with linear and quadratic models and a Rosseland diameter of 45.03 +/- 0.12 mas
with a MARCS model. These measurements lead us to derive an updated effective
temperature of 3600 +/- 66 K. We detect a fully-resolved environment to which
the silicate dust shell is likely to contribute. By using two imaging
reconstruction algorithms, we unveiled two bright spots on the surface of
Betelgeuse. One spot has a diameter of about 11 mas and accounts for about 8.5%
of the total flux. The second one is unresolved (diameter < 9 mas) with 4.5% of
the total flux. Resolved images of Betelgeuse in the H band are asymmetric at
the level of a few percent. The MOLsphere is not detected in this wavelength
range. The amount of measured limb-darkening is in good agreement with model
predictions. The two spots imaged at the surface of the star are potential
signatures of convective cells.Comment: 10 pages, 10 figures, accepted for publication in A&A, references
adde
Radiative hydrodynamics simulations of red supergiant stars: II. simulations of convection on Betelgeuse match interferometric observations
Context. The red supergiant (RSG) Betelgeuse is an irregular variable star.
Convection may play an important role in understanding this variability.
Interferometric observations can be interpreted using sophisticated simulations
of stellar convection. Aims. We compare the visibility curves and closure
phases obtained from our 3D simulation of RSG convection with CO5BOLD to
various interferometric observations of Betelgeuse from the optical to the H
band in order to characterize and measure the convection pattern on this star.
Methods. We use 3D radiative-hydrodynamics (RHD) simulation to compute
intensity maps in different filters and we thus derive interferometric
observables using the post-processing radiative transfer code OPTIM3D. The
synthetic visibility curves and closure phases are compared to observations.
Results. We provide a robust detection of the granulation pattern on the
surface of Betelgeuse in the optical and in the H band based on excellent fits
to the observed visibility points and closure phases. Moreover, we determine
that the Betelgeuse surface in the H band is covered by small to medium scale
(5-15 mas) convection-related surface structures and a large (30 mas)
convective cell. In this spectral region, H2O molecules are the main absorbers
and contribute to the small structures and to the position of the first null of
the visibility curve (i.e. the apparent stellar radius).Comment: 11 pages, Accepted for publication on A&
Kalman-filter control schemes for fringe tracking. Development and application to VLTI/GRAVITY
The implementation of fringe tracking for optical interferometers is
inevitable when optimal exploitation of the instrumental capacities is desired.
Fringe tracking allows continuous fringe observation, considerably increasing
the sensitivity of the interferometric system. In addition to the correction of
atmospheric path-length differences, a decent control algorithm should correct
for disturbances introduced by instrumental vibrations, and deal with other
errors propagating in the optical trains. We attempt to construct control
schemes based on Kalman filters. Kalman filtering is an optimal data processing
algorithm for tracking and correcting a system on which observations are
performed. As a direct application, control schemes are designed for GRAVITY, a
future four-telescope near-infrared beam combiner for the Very Large Telescope
Interferometer (VLTI). We base our study on recent work in adaptive-optics
control. The technique is to describe perturbations of fringe phases in terms
of an a priori model. The model allows us to optimize the tracking of fringes,
in that it is adapted to the prevailing perturbations. Since the model is of a
parametric nature, a parameter identification needs to be included. Different
possibilities exist to generalize to the four-telescope fringe tracking that is
useful for GRAVITY. On the basis of a two-telescope Kalman-filtering control
algorithm, a set of two properly working control algorithms for four-telescope
fringe tracking is constructed. The control schemes are designed to take into
account flux problems and low-signal baselines. First simulations of the
fringe-tracking process indicate that the defined schemes meet the requirements
for GRAVITY and allow us to distinguish in performance. In a future paper, we
will compare the performances of classical fringe tracking to our Kalman-filter
control.Comment: 17 pages, 8 figures, accepted for publication in A&
Image reconstruction in optical interferometry: Benchmarking the regularization
With the advent of infrared long-baseline interferometers with more than two
telescopes, both the size and the completeness of interferometric data sets
have significantly increased, allowing images based on models with no a priori
assumptions to be reconstructed. Our main objective is to analyze the multiple
parameters of the image reconstruction process with particular attention to the
regularization term and the study of their behavior in different situations.
The secondary goal is to derive practical rules for the users. Using the
Multi-aperture image Reconstruction Algorithm (MiRA), we performed multiple
systematic tests, analyzing 11 regularization terms commonly used. The tests
are made on different astrophysical objects, different (u,v) plane coverages
and several signal-to-noise ratios to determine the minimal configuration
needed to reconstruct an image. We establish a methodology and we introduce the
mean-square errors (MSE) to discuss the results. From the ~24000 simulations
performed for the benchmarking of image reconstruction with MiRA, we are able
to classify the different regularizations in the context of the observations.
We find typical values of the regularization weight. A minimal (u,v) coverage
is required to reconstruct an acceptable image, whereas no limits are found for
the studied values of the signal-to-noise ratio. We also show that
super-resolution can be achieved with increasing performance with the (u,v)
coverage filling. Using image reconstruction with a sufficient (u,v) coverage
is shown to be reliable. The choice of the main parameters of the
reconstruction is tightly constrained. We recommend that efforts to develop
interferometric infrastructures should first concentrate on the number of
telescopes to combine, and secondly on improving the accuracy and sensitivity
of the arrays.Comment: 15 pages, 16 figures; accepted in A&
The Pulsation of Chi Cygni Imaged by Optical Interferometry; a Novel Technique to Derive Distance and Mass of Mira Stars
We present infrared interferometric imaging of the S-type Mira star Chi
Cygni. The object was observed at four different epochs in 2005-2006 with the
IOTA optical interferometer (H band). Images show up to 40% variation in the
stellar diameter, as well as significant changes in the limb darkening and
stellar inhomogeneities. Model fitting gave precise time-dependent values of
the stellar diameter, and reveals presence and displacement of a warm molecular
layer. The star radius, corrected for limb darkening, has a mean value of 12.1
mas and shows a 5.1mas amplitude pulsation. Minimum diameter was observed at
phase 0.94+/-0.01. Maximum temperature was observed several days later at phase
1.02+/-0.02. We also show that combining the angular acceleration of the
molecular layer with CO (Delta v = 3) radial velocity measurements yields a
5.9+/-1.5 mas parallax. The constant acceleration of the CO molecules -- during
80% of the pulsation cycle -- lead us to argument for a free-falling layer. The
acceleration is compatible with a gravitational field produced by a
2.1(+1.5/-0.7) solar mass star. This last value is in agreement with
fundamental mode pulsator models. We foresee increased development of
techniques consisting in combining radial velocity with interferometric angular
measurements, ultimately allowing total mapping of the speed, density, and
position of the diverse species in pulsation driven atmospheres.Comment: 36 pages, accepted in Ap
Matrix-Bound PAI-1 Supports Cell Blebbing via RhoA/ROCK1 Signaling
The microenvironment of a tumor can influence both the morphology and the behavior of cancer cells which, in turn, can rapidly adapt to environmental changes. Increasing evidence points to the involvement of amoeboid cell migration and thus of cell blebbing in the metastatic process; however, the cues that promote amoeboid cell behavior in physiological and pathological conditions have not yet been clearly identified. Plasminogen Activator Inhibitor type-1 (PAI-1) is found in high amount in the microenvironment of aggressive tumors and is considered as an independent marker of bad prognosis. Here we show by immunoblotting, activity assay and immunofluorescence that, in SW620 human colorectal cancer cells, matrix-associated PAI-1 plays a role in the cell behavior needed for amoeboid migration by maintaining cell blebbing, localizing PDK1 and ROCK1 at the cell membrane and maintaining the RhoA/ROCK1/MLC-P pathway activation. The results obtained by modeling PAI-1 deposition around tumors indicate that matrix-bound PAI-1 is heterogeneously distributed at the tumor periphery and that, at certain spots, the elevated concentrations of matrix-bound PAI-1 needed for cancer cells to undergo the mesenchymal-amoeboid transition can be observed. Matrix-bound PAI-1, as a matricellular protein, could thus represent one of the physiopathological requirements to support metastatic formation
PAI-1 and functional blockade of SNAI1 in breast cancer cell migration
12 pages, 5 figures.-- PMID: 19055748 [PubMed].-- et al.[Introduction]: Snail, a family of transcriptional repressors implicated in cell movement, has been correlated with tumour invasion. The Plasminogen Activation (PA) system, including urokinase plasminogen activator (uPA), its receptor and its inhibitor, plasminogen activator inhibitor type 1(PAI-1), also plays a key role in cancer invasion and metastasis, either through proteolytic degradation or by non-proteolytic modulation of cell
adhesion and migration. Thus, Snail and the PA system are both over-expressed in cancer and influence this process. In this study we aimed to determine if the activity of SNAI1 (a member of the Snail family) is correlated with expression of the PA system components and how this correlation can influence tumoural cell migration.[Methods]: We compared the invasive breast cancer cell-line MDA-MB-231 expressing SNAI1 (MDA-mock) with its derived clone expressing a dominant-negative form of SNAI1 (SNAI1-DN). Expression of PA system mRNAs was analysed by cDNA microarrays and real-time quantitative RT-PCR. Wound healing assays were used to determine cell migration. PAI-1 distribution was assessed by immunostaining.[Results]: We demonstrated by both cDNA microarrays and realtime quantitative RT-PCR that the functional blockade of SNAI1
induces a significant decrease of PAI-1 and uPA transcripts. After performing an in vitro wound-healing assay, we observed
that SNAI1-DN cells migrate more slowly than MDA-mock cells and in a more collective manner. The blockade of SNAI1 activity resulted in the redistribution of PAI-1 in SNAI1-DN cells decorating large lamellipodia, which are commonly found
structures in these cells.[Conclusions]: In the absence of functional SNAI1, the expression of PAI-1 transcripts is decreased, although the protein is redistributed at the leading edge of migrating cells in a manner comparable with that seen in normal epithelial cells.This work was supported by the CNRS ACI Program "Complexité du vivant" (grant # 050009DR11) and by the Evry Genopole grant "Aide à l'acquisition d'équipement semi-lourd" 2007 and 2008.Peer reviewe
Radio & Optical Interferometry: Basic Observing Techniques and Data Analysis
Astronomers usually need the highest angular resolution possible, but the
blurring effect of diffraction imposes a fundamental limit on the image quality
from any single telescope. Interferometry allows light collected at
widely-separated telescopes to be combined in order to synthesize an aperture
much larger than an individual telescope thereby improving angular resolution
by orders of magnitude. Radio and millimeter wave astronomers depend on
interferometry to achieve image quality on par with conventional visible and
infrared telescopes. Interferometers at visible and infrared wavelengths extend
angular resolution below the milli-arcsecond level to open up unique research
areas in imaging stellar surfaces and circumstellar environments.
In this chapter the basic principles of interferometry are reviewed with an
emphasis on the common features for radio and optical observing. While many
techniques are common to interferometers of all wavelengths, crucial
differences are identified that will help new practitioners avoid unnecessary
confusion and common pitfalls. Concepts essential for writing observing
proposals and for planning observations are described, depending on the science
wavelength, angular resolution, and field of view required. Atmospheric and
ionospheric turbulence degrades the longest-baseline observations by
significantly reducing the stability of interference fringes. Such
instabilities represent a persistent challenge, and the basic techniques of
phase-referencing and phase closure have been developed to deal with them.
Synthesis imaging with large observing datasets has become a routine and
straightforward process at radio observatories, but remains challenging for
optical facilities. In this context the commonly-used image reconstruction
algorithms CLEAN and MEM are presented. Lastly, a concise overview of current
facilities is included as an appendix.Comment: 45 pages, 14 Figures; an abridged version of a chapter to appear in
Volume 2 of Planets, Stars and Stellar Systems, to be published in 2011 by
Springe