38 research outputs found
Low cost color assessment of turbid liquids using supervised learning data analysis â proof of concept
This work reports the development of a low cost in-line color sensor for turbid liquids based on the transmission and scattering phenomena of light from RGB and IR LED sources, gathering multidimensional data. Three different methodologies to discriminate color from the turbidity influence are presented as a proof of concept approach. They are based in regression models, expectation maximization Gaussian mixtures and artificial neural networks applied to labeled measurements. Each methodology presents advantages and disadvantages which will depend on the intended implementation. Regression models revealed to be best suited for standard or occasional measurements, the EM Gaussian mixture will perform better for well-known controlled range of colors and turbidities and the neural networks have easy implementation and potential suited for real-time IoT platforms.publishe
Inscription of narrow bandwidth bragg gratings in polymer optical fibers
We report on the production and characterization of narrow bandwidth fiber Bragg gratings (FBGs) in two spectral regions using polymer optical fibers (POFs). Narrow bandwidth FBGs are increasingly important for POF transmission systems, WDM technology and sensing applications. Long FBGs with resonance wavelength around 850 nm and 1550 nm were fabricated in several types of polymer optical fibers. The 3 dB FBG bandwidth varies from 0.22 nm down to 0.045 nm considering a Bragg grating length of 10 mm and 25 mm, respectively
Analysis of the coupling between a single-mode fiber to a multi-core fiber with long-period gratings
In this paper, the coupling of a single source injected in a single-mode fiber to all the cores of a multi-core fiber is theoretically studied. The power transfer between the core and the cladding of a fiber is promoted by long-period gratings. To promote the power transfer between the fibers, we considered cladding modes with similar effective refractive index. The results show that the coupling is possible, but the design still needs to be optimized to maximize the power transfer.publishe
Acousto-optic effect in microstructured polymer fiber bragg gratings:simulation and experimental overview
A fine control of the microstructured polymer fiber Bragg grating spectrum properties, such as maximum reflected power and 3-dB bandwidth, through acousto-optic modulation is presented. For simulation purposes, the device is modelled as a single structure, comprising a silica horn and a fiber Bragg grating. For similar sized structures a good correlation between the numerical results and the experimental data is obtained, allowing the strain field to be completely characterized along the whole structure. It is also shown that the microstructured polymer fiber Bragg grating requires less effort from the piezoelectric actuator to produce modification in the grating spectrum when compared with a silica fiber Bragg grating. This technique has potential to be applied on tunable optical filters and tunable cavities for photonic applications
Enhanced optical gain clamping for upstream packet based trafïŹc on hybrid WDM/TDM-PON using ïŹber bragg grating
In this paper, we propose a method to mitigate the temporal power transients arising from Erbium doped ïŹber ampliïŹers (EDFAs) on packeted/bursty scenario. The technique, applicable on hybrid WDM/TDM-PON for extended reach, is based on a low power clamping provided by a distributed feedback (DFB) laser and a ïŹber Bragg grating (FBG). An mprovement in the data signal Q factor was achieved keeping the clamping control signal with a low power, accompanied by a maximum reduction in the gain excursion of 1.12 d
Recommended from our members
Dimensioning of a multibeam coherent photonic beamformer fed by a phased array antenna.
The design and dimensioning of a photonic-aided payload for a multi-beam high-throughput communications satellite is a complex problem in which the antenna, RF and photonic subsystems must be considered as a whole for achieving best performance with lowest mass and power consumption. In this paper, we propose and dimension the receiving stage of a communications satellite comprising a phased array antenna (PAA) feeding a multibeam photonic beamforming system (PBS). The PBS uses a single wavelength and resorts to heterodyne detection such that the retrieved beams are frequency downconverted. End-to-end system modeling shows that the complexity of the PAA and PBS can be traded-off for signal-to-noise ratio (SNR) or power consumption without compromising the beam width. The dimensioning of a realistic scenario is presented, showing that an SNR and beam crosstalk on the order of 20 dB are achievable with a total power consumption below 1 kW for a typical number of 100 antenna elements (AEs)
Recommended from our members
Modular coherent photonic-aided payload receiver for communications satellites
Ubiquitous satellite communications are in a leading position for bridging the digital divide. Fulfilling such a mission will require satellite services on par with fibre services, both in bandwidth and cost. Achieving such a performance requires a new generation of communications payloads powered by large-scale processors, enabling a dynamic allocation of hundreds of beams with a total capacity beyond 1Â Tbit sâ1. The fact that the scale of the processor is proportional to the wavelength of its signals has made photonics a key technology for its implementation. However, one last challenge hinders the introduction of photonics: while large-scale processors demand a modular implementation, coherency among signals must be preserved using simple methods. Here, we demonstrate a coherent photonic-aided receiver meeting such demands. This work shows that a modular and coherent photonic-aided payload is feasible, making way to an extensive introduction of photonics in next generation communications satellites
The role of anthropogenic habitats in freshwater mussel conservation
Anthropogenic freshwater habitats may provide undervalued prospects for long-term conservation as part of species conservation planning. This fundamental, but overlooked, issue requires attention considering the pace that humans have been altering natural freshwater ecosystems and the accelerated levels of biodiversity decline in recent decades. We compiled 709 records of freshwater mussels (Bivalvia, Unionida) inhabiting a broad variety of anthropogenic habitat types (from small ponds to large reservoirs and canals) and reviewed their importance as refuges for this faunal group. Most records came from Europe and North America, with a clear dominance of canals and reservoirs. The dataset covered 228 species, including 34 threatened species on the IUCN Red List. We discuss the conservation importance and provide guidance on how these anthropogenic habitats could be managed to provide optimal conservation value to freshwater mussels. This review also shows that some of these habitats may function as ecological traps owing to conflicting management practices or because they act as a sink for some populations. Therefore, anthropogenic habitats should not be seen as a panacea to resolve conservation problems. More information is necessary to better understand the trade-offs between human use and the conservation of freshwater mussels (and other biota) within anthropogenic habitats, given the low number of quantitative studies and the strong biogeographic knowledge bias that persists.This publication is based upon work from COST Action CA18239,
supported by COST (European Cooperation in Science and
Technology). A.M.L. was financed by the Institute of Environmental
Sciences Jagiellonian University (N18/DBS/000003) and K.N.
by the AragĂłn Government. The authors acknowledge JarosĆaw
Andrzejewski, Bartosz Czader, Anna Fica, Marcin Horbacz,
Tomasz Jonderko, Steinar KÄlÄs, Tomasz Kapela, BjÞrn Mejdell
Larsen, Maciej Pabijan, Katarzyna Pawlik, Ilona PopĆawska, Joanna
Przybylska, Tomasz PrzybyĆ, Mateusz Rybak, Kjell Sandaas, JarosĆaw
SĆowikowski, Tomasz Szczasny, MichaĆ Zawadzki and PaweĆ Zowada
for providing detailed information on specific examples concerning
freshwater mussels in anthropogenic habitats. We thank the editor
and two anonymous referees for the valuable suggestions made,
which increased the clarity of our manuscript.info:eu-repo/semantics/publishedVersio
Use of DNA technology in forensic dentistry
The established importance of Forensic Dentistry for human identification, mainly when there is little remaining material to perform such identification (e.g., in fires, explosions, decomposing bodies or skeletonized bodies), has led dentists working with forensic investigation to become more familiar with the new molecular biology techniques. The currently available DNA tests have high reliability and are accepted as legal proofs in courts. This article presents a literature review referring to the main studies on Forensic Dentistry that involve the use of DNA for human identification, and makes an overview of the evolution of this technology in the last years, highlighting the importance of molecular biology in forensic sciences
Inducible nitric oxide synthase (iNOS) expression in monocytes during acute Dengue Fever in patients and during in vitro infection
ABSTRACT: Mononuclear phagocytes are considered to be main targets for Dengue Virus (DENV) replication. These cells are activated after infection, producing proinflammatory mediators, including tumour-necrosis factor-α, which has also been detected in vivo. Nitric oxide (NO), usually produced by activated mononuclear phagocytes, has antimicrobial and antiviral activities. METHODS: The expression of DENV antigens and inducible nitric oxide synthase (iNOS) in human blood isolated monocytes were analysed by flow cytometry using cells either from patients with acute Dengue Fever or after DENV-1 in vitro infection. DENV-1 susceptibility to iNOS inhibition and NO production was investigated using N(G)-methyl L-Arginine (N(G)MLA) as an iNOS inhibitor, which was added to DENV-1 infected human monocytes, and sodium nitroprussiate (SNP), a NO donor, added to infected C6/36 mosquito cell clone. Viral antigens after treatments were detected by flow cytometry analysis. RESULTS: INOS expression in activated monocytes was observed in 10 out of 21 patients with Dengue Fever and was absent in cells from ten healthy individuals. DENV antigens detected in 25 out of 35 patients, were observed early during in vitro infection (3 days), significantly diminished with time, indicating that virus replicated, however monocytes controlled the infection. On the other hand, the iNOS expression was detected at increasing frequency in in vitro infected monocytes from three to six days, exhibiting an inverse relationship to DENV antigen expression. We demonstrated that the detection of the DENV-1 antigen was enhanced during monocyte treatment with N(G)MLA. In the mosquito cell line C6/36, virus detection was significantly reduced in the presence of SNP, when compared to that of untreated cells. CONCLUSION: This study is the first to reveal the activation of DENV infected monocytes based on induction of iNOS both in vivo and in vitro, as well as the susceptibility of DENV-1 to a NO production