1,068 research outputs found
Semidirect computation of three-dimensional viscous flows over suction holes in laminar flow control surfaces
A summary is given of the attempts made to apply semidirect methods to the calculation of three-dimensional viscous flows over suction holes in laminar flow control surfaces. The attempts were all unsuccessful, due to either (1) lack of resolution capability, (2) lack of computer efficiency, or (3) instability
3-d resistive MHD simulations of magnetic reconnection and the tearing mode instability in current sheets
Magnetic reconnection plays a critical role in many astrophysical processes
where high energy emission is observed, e.g. particle acceleration,
relativistic accretion powered outflows, pulsar winds and probably in
dissipation of Poynting flux in GRBs. The magnetic field acts as a reservoir of
energy and can dissipate its energy to thermal and kinetic energy via the
tearing mode instability. We have performed 3d nonlinear MHD simulations of the
tearing mode instability in a current sheet. Results from a temporal stability
analysis in both the linear regime and weakly nonlinear (Rutherford) regime are
compared to the numerical simulations. We observe magnetic island formation,
island merging and oscillation once the instability has saturated. The growth
in the linear regime is exponential in agreement with linear theory. In the
second, Rutherford regime the island width grows linearly with time. We find
that thermal energy produced in the current sheet strongly dominates the
kinetic energy. Finally preliminary analysis indicates a P(k) 4.8 power law for
the power spectral density which suggests that the tearing mode vortices play a
role in setting up an energy cascade.Comment: 4 pages, 8 figures, accepted for publication in the International
Journal of Modern Physics D, proceedings of HEPRO meeting, held in Dublin, in
September 200
Computational Fluid Dynamic Studies of Vortex Amplifier Design for the Nuclear IndustryâI. Steady-State Conditions
In this study the effects of changes to the geometry of a vortex amplifier are investigated using computational fluid dynamics (CFD) techniques, in the context of glovebox operations for the nuclear industry. These investigations were required because of anomalous behavior identified when, for operational reasons, a long-established vortex amplifier design was reduced in scale. The aims were (i) to simulate both the anomalous back-flow into the glovebox through the vortex amplifier supply ports, and the precessing vortex core in the amplifier outlet, then (ii) to determine which of the various simulated geometries would best alleviate the supply port back-flow anomaly. Various changes to the geometry of the vortex amplifier were proposed; smoke and air tests were then used to identify a subset of these geometries for subsequent simulation using CFD techniques. Having verified the mesh resolution was sufficient to reproduce the required effects, the code was then validated by comparing the results of the steady-state simulations with the experimental data. The problem is challenging in terms of the range of geometrical and dynamic scales encountered, with consequent impact on mesh quality and turbulence modeling. The anomalous nonaxisymmetric reverse flow in the supply ports of the vortex amplifier has been captured and the mixing in both the chamber and the precessing vortex core has also been successfully reproduced. Finally, by simulating changes to the supply ports that could not be reproduced experimentally at an equivalent cost, the geometry most likely to alleviate the back-flow anomaly has been identified
Mathematical aspects of variational grid generation II
AbstractVariational grid generation techniques are now used to produce grids suitable for solving numerical partial differential equations in irregular geometries. In this paper the existence and uniqueness of solutions of the volume and smoothness problems that are used in variational grid generation are studied. An analysis of the Euler-Lagrange (EL) equations near the identity shows that the volume problem is difficult. These variational problems use a reference grid to specify the properties of the desired grid. Replication of reference grid properties is analyzed. Examples are given that show the effectiveness of the reference grid concept
Potential flows in a core-dipole-shell system: numerical results
Numerical solutions for: the integral curves of the velocity field
(streamlines), the density contours, and the accretion rate of a steady-state
flow of an ideal fluid with p=K n^(gamma) equation of state orbiting in a
core-dipole-shell system are presented. For 1 < gamma < 2, we found that the
non-linear contribution appearing in the partial differential equation for the
velocity potential has little effect in the form of the streamlines and density
contour lines, but can be noticed in the density values. The study of several
cases indicates that this appears to be the general situation. The accretion
rate was found to increase when the constant gamma decreases.Comment: RevTex, 8 pages, 5 eps figures, CQG to appea
âCan you just put your phone away?â: The effects of cell phone use on face-to-face conflict in romantic relationships
Effective conflict management is critical for satisfying close relationships, and communication technology is now a fundamental part of conflict management. One way that communication technology may be central to face-to-face (FtF) conflict interactions is by the presence or use of cell phones during conflict interactions. There is empirical evidence for a âmere presenceâ effect of cell phones on FtF interactions, such that the presence of cell phones is dissatisfying. Existing perspectives also suggest that individuals may be motivated to multitask with communication technology while carrying out a FtF interaction or meeting, but the effects of multitasking in close relationships is less clear. As such, this dissertation investigates the influence of cell phone usage and presence on conflict interactions. Romantic couples in college (n = 64 dyads) had a 10-minute serial argument conversation. Dyads were randomly assigned into a phone absent, phone present, or phone use condition, and one member of the dyad was randomly selected to act as a confederate. Confederates either received messages on their cell phone, were instructed to use their cell phone while trying to resolve the serial argument with their partner, or did not have a cell phone during the interaction. Results provide evidence that cell phone use during a FtF conflict conversation is dissatisfying. In addition, perceptions of technological interference due to confederate cell phone use elicited dissatisfaction, whereas as global ratings of partner interference increased, perceived resolvability decreased for participants in the multicommunication condition. The results offer theoretical and practical implications for effectively managing conflict when cell phones are present or are in use by a romantic partner
Verification of BOUT++ by the method of manufactured solutions
BOUT++ is a software package designed for solving plasma fluid models. It has been used to simulate a wide range of plasma phenomena ranging from linear stability analysis to 3D plasma turbulence and is capable of simulating a wide range of drift-reduced plasma fluid and gyro-fluid models. A verification exercise has been performed as part of a EUROfusion Enabling Research project, to rigorously test the correctness of the algorithms implemented in BOUT++, by testing order-of-accuracy convergence rates using the Method of Manufactured Solutions (MMS). We present tests of individual components including time-integration and advection schemes, non-orthogonal toroidal field-aligned coordinate systems and the shifted metric procedure which is used to handle highly sheared grids. The flux coordinate independent approach to differencing along magnetic field-lines has been implemented in BOUT++ and is here verified using the MMS in a sheared slab configuration. Finally, we show tests of three complete models: 2-field Hasegawa-Wakatani in 2D slab, 3-field reduced magnetohydrodynamics (MHD) in 3D field-aligned toroidal coordinates, and 5-field reduced MHD in slab geometry
Numerical modeling of oscillating Taylor bubbles
In this study, computational fluid dynamics (CFD) modeling is used to simulate Taylor bubbles rising in vertical pipes. Experiments indicate that in large diameter (0.29 m) pipes for an airâwater system, the bubbles can rise in a oscillatory manner, depending on the method of air injection. The CFD models are able to capture this oscillatory behavior because the air phase is modeled as a compressible ideal gas. Insights into the flow field ahead and behind the bubble during contraction and expansion are shown. For a bubble with an initial pressure equal to the hydrostatic pressure at its nose, no oscillations are seen in the bubble as it rises. If the initial pressure in the bubble is set less than or greater than the hydrostatic pressure then the length of the bubble oscillates with an amplitude that depends on the magnitude of the initial bubble pressure relative to the hydrostatic pressure. The frequency of the oscillations is inversely proportional to the square root of the head of water above the bubble and so the frequency increases as the bubble approaches the water surface. The predicted frequency also depends inversely on the square root of the average bubble length, in agreement with experimental observations and an analytical model that is also presented. In this model, a viscous damping term due to the presence of a Stokes boundary layer for the oscillating cases is introduced for the first time and used to assess the effect on the oscillations of increasing the liquid viscosity by several orders of magnitude
Flow characterisation for a validation study in high-speed aerodynamics
Validation studies are becoming increasingly relevant when investigating complex flow problems in high-speed aerodynamics. These investigations require calibration of numerical models with accurate data from the physical wind tunnel being studied. This paper presents the characterisation process for a joint experimental-computational study to investigate the streamwise corners of a Mach 2.5 channel flow. As well as checks of flow quality typically performed for phenomenological investigations, additional quantitative tests are conducted. The extra care to obtain high quality data and eliminate any systematic errors reveal useful information about the wind tunnel flow. Further important physical insights are gained from designing and conducting wind tunnel tests in conjunction with numerical simulations. Crucially, the close experimental-computational collaboration enabled the
identification of secondary flows in the sidewall boundary-layers; these strongly influence the flow in the corner regions, the target of the validation study
The synergistic integration of computational fluid dynamics and experimental fluid dynamics for ground effect aerodynamics studies
This article highlights the âsynergisticâ use of experimental fluid dynamics (EFD) and computational fluid dynamics (CFD), where the two sets of simulations are performed concurrently and by the same researcher. In particular, examples from the area of ground effect aerodynamics are discussed, where the major facility used was also designed through a combination of CFD and EFD. Three examples are than outlined, to demonstrate the insight that can be obtained from the integration of CFD and EFD studies. The case studies are the study of dimple flow (to enhance aerodynamic performance), the analysis of a Formula-style front wing and wheel, and the study of compressible flow ground effect aerodynamics. In many instances, CFD has been used to not only provide complementary information to an experimental study, but to design the experiments. Laser-based, non-intrusive experimental techniques were used to provide an excellent complement to CFD. The large datasets found from both experimental and numerical simulations have required a new methodology to correlate the information; a new post-processing method has been developed, making use of the kriging and co-kriging estimators, to develop correlations between the often disparate data types
- âŠ