6 research outputs found
The Control Unit of the KM3NeT Data Acquisition System
The KM3NeT Collaboration runs a multi-site neutrino observatory in the Mediterranean Sea. Water Cherenkov particle detectors, deep in the sea and far off the coasts of France and Italy, are already taking data while incremental construction progresses. Data Acquisition Control software is operating off-shore detectors as well as testing and qualification stations for their components. The software, named Control Unit, is highly modular. It can undergo upgrades and reconfiguration with the acquisition running. Interplay with the central database of the Collaboration is obtained in a way that allows for data taking even if Internet links fail. In order to simplify the management of computing resources in the long term, and to cope with possible hardware failures of one or more computers, the KM3NeT Control Unit software features a custom dynamic resource provisioning and failover technology, which is especially important for ensuring continuity in case of rare transient events in multi-messenger astronomy. The software architecture relies on ubiquitous tools and broadly adopted technologies and has been successfully tested on several operating systems
Characterisation of the Hamamatsu photomultipliers for the KM3NeT Neutrino Telescope
[EN] The Hamamatsu R12199-02 3-inch photomultiplier tube is the photodetector chosen for the first phase of the KM3NeT neutrino telescope. About 7000 photomultipliers have been characterised for dark count rate, timing spread and spurious pulses. The quantum eÿciency, the gain and the peak-to-valley ratio have also been measured for a sub-sample in order to determine parameter values needed as input to numerical simulations of the detector.The authors acknowledge the financial support of the funding agencies: Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), IdEx program and UnivEarthS Labex program at Sorbonne Paris Cite (ANR-10-LABX-0023 and ANR-11-IDEX-0005-02), France; 'Helmholtz Alliance for Astroparticle Physics' funded by the Initiative and Networking Fund of the Helmholtz Association, Germany; The General Secretariat of Research and Technology (GSRT), Greece; Istituto Nazionale di Fisica Nucleare (INFN), Ministero dell'Istruzione, dell'Universita e della Ricerca (MIUR), Italy; Agence de l'Oriental and CNRST, Morocco; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; National Authority for Scientific Research (ANCS), Romania; Plan Estatal de Investigacion (refs. FPA2015-65150-C3-1-P, -2-P and -3-P, (MINECO/FEDER)), Severo Ochoa Centre of Excellence and MultiDark Consolider (MINECO), and Prometeo and Grisolia programs (Generalitat Valenciana), Spain.Aiello, S.; Akrame, SE.; Ameli, F.; Anassontzis, EG.; Andre, M.; Androulakis, G.; Anghinolfi, M.... (2018). Characterisation of the Hamamatsu photomultipliers for the KM3NeT Neutrino Telescope. Journal of Instrumentation. 13:1-17. https://doi.org/10.1088/1748-0221/13/05/P05035S11713Adrián-MartÃnez, S., Ageron, M., Aharonian, F., Aiello, S., Albert, A., Ameli, F., … Anghinolfi, M. (2016). Letter of intent for KM3NeT 2.0. Journal of Physics G: Nuclear and Particle Physics, 43(8), 084001. doi:10.1088/0954-3899/43/8/084001Adrián-MartÃnez, S., Ageron, M., Aharonian, F., Aiello, S., Albert, A., Ameli, F., … Anvar, S. (2014). Deep sea tests of a prototype of the KM3NeT digital optical module. The European Physical Journal C, 74(9). doi:10.1140/epjc/s10052-014-3056-3Adrián-MartÃnez, S., Ageron, M., Aharonian, F., Aiello, S., Albert, A., Ameli, F., … Anton, G. (2016). The prototype detection unit of the KM3NeT detector. The European Physical Journal C, 76(2). doi:10.1140/epjc/s10052-015-3868-9Herold, B., Kalekin, O., & Reubelt, J. (2011). PMT characterisation for the KM3NeT project. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 639(1), 70-72. doi:10.1016/j.nima.2010.09.018Timmer, P., Heine, E., & Peek, H. (2010). Very low power, high voltage base for a Photo Multiplier Tube for the KM3NeT deep sea neutrino telescope. Journal of Instrumentation, 5(12), C12049-C12049. doi:10.1088/1748-0221/5/12/c12049Mollo, C. M., Bozza, C., Chiarusi, T., Costa, M., Capua, F. D., Kulikovskiy, V., … Vivolo, D. (2016). A new instrument for high statistics measurement of photomultiplier characteristics. Journal of Instrumentation, 11(08), T08002-T08002. doi:10.1088/1748-0221/11/08/t08002Adrián-MartÃnez, S., Ageron, M., Aiello, S., Albert, A., Ameli, F., Anassontzis, E. G., … Anton, G. (2016). A method to stabilise the performance of negatively fed KM3NeT photomultipliers. Journal of Instrumentation, 11(12), P12014-P12014. doi:10.1088/1748-0221/11/12/p12014Lubsandorzhiev, B. K., Vasiliev, R. V., Vyatchin, Y. E., & Shaibonov, B. A. J. (2006). Photoelectron backscattering in vacuum phototubes. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 567(1), 12-16. doi:10.1016/j.nima.2006.05.04
Dependence of atmospheric muon flux on seawater depth measured with the first KM3NeT detection units: The KM3NeT Collaboration
KM3NeT is a research infrastructure located in the Mediterranean Sea, that will consist of two deep-sea Cherenkov neutrino detectors. With one detector (ARCA), the KM3NeT Collaboration aims at identifying and studying TeV–PeV astrophysical neutrino sources. With the other detector (ORCA), the neutrino mass ordering will be determined by studying GeV-scale atmospheric neutrino oscillations. The first KM3NeT detection units were deployed at the Italian and French sites between 2015 and 2017. In this paper, a description of the detector is presented, together with a summary of the procedures used to calibrate the detector in-situ. Finally, the measurement of the atmospheric muon flux between 2232–3386 m seawater depth is obtained
KM3NeT front-end and readout electronics system: hardware, firmware and software
International audienceThe KM3NeT research infrastructure being built at the bottom of the Mediterranean Sea will host water-Cherenkov telescopes for the detection of cosmic neutrinos. The neutrino telescopes will consist of large volume three-dimensional grids of optical modules to detect the Cherenkov light from charged particles produced by neutrino-induced interactions. Each optical module houses 31 3-in. photomultiplier tubes, instrumentation for calibration of the photomultiplier signal and positioning of the optical module, and all associated electronics boards. By design, the total electrical power consumption of an optical module has been capped at seven Watts. We present an overview of the front-end and readout electronics system inside the optical module, which has been designed for a 1-ns synchronization between the clocks of all optical modules in the grid during a life time of at least 20 years.</p