4,702 research outputs found
Identification of altered function alleles that affect Bacillus subtilis PerR metal ion selectivity
Bacillus subtilis PerR is a Fur family repressor that senses hydrogen peroxide by metal-catalyzed oxidation. PerR contains a structural Zn(II) ion (Site 1) and a regulatory metal binding site (Site 2) that, upon association with either Mn(II) or Fe(II), allosterically activates DNA binding. In addition, a third less conserved metal binding site (Site 3) is present near the dimer interface in several crystal structures of homologous Fur family proteins. Here, we show that PerR proteins with substitutions of putative Site 3 residues (Y92A, E114A and H128A) are functional as repressors, but are unexpectedly compromised in their ability to sense H2O2. Consistently, these mutants utilize Mn(II) but not Fe(II) as a co-repressor in vivo. Metal titrations failed to identify a third binding site in PerR, and inspection of the PerR structure suggests that these residues instead constitute a hydrogen binding network that modulates the architecture, and consequently the metal selectivity, of Site 2. PerR H128A binds DNA with high affinity, but has a significantly reduced affinity for Fe(II), and to a lesser extent for Mn(II). The ability of PerR H128A to bind Fe(II) in vivo and to thereby respond efficiently to H2O2 was restored in a fur mutant strain with elevated cytosolic iron concentration
The influence of surface energy on the self-cleaning of insect adhesive devices
The ability of insects to adhere to surfaces is facilitated by the use of adhesive organs found on the terminal leg segments. These adhesive pads are inherently 'tacky' and are expected to be subject to contamination by particulates, leading to loss of function. Here, we investigated the self-cleaning of ants and beetles by comparing the abilities of both hairy and smooth pad forms to selfclean on both high and low energy surfaces after being fouled with microspheres of two sizes and surface energies. We focused on the time taken to regain adhesive potential in unrestrained Hymenopterans (Polyrhachis dives and Myrmica scabrinodis) and Coccinellids (Harmonia axyridis and Adalia bipunctata) fouled with microspheres. We found that the reattainment of adhesion is influenced by particle type and size in Hymenopterans, with an interaction between the surface energy of the contaminating particle and substrate. In Coccinellids, reattainment of adhesion was only influenced by particle size and substrate properties. The adhesive organs of Coccinellids appear to possess superior self-cleaning abilities compared with those of Hymenopterans, although Hymenopterans exhibit better adhesion to both surface types. © 2012. Published by The Company of Biologists Ltd
Observation of oscillatory relaxation in the Sn-terminated surface of epitaxial rock-salt SnSe topological crystalline insulator
Topological crystalline insulators have been recently predicted and observed
in rock-salt structure SnSe thin films. Previous studies have
suggested that the Se-terminated surface of this thin film with hydrogen
passivation, has a reduced surface energy and is thus a preferred
configuration. In this paper, synchrotron-based angle-resolved photoemission
spectroscopy, along with density functional theory calculations, are used to
demonstrate conclusively that a rock-salt SnSe thin film
epitaxially-grown on \ce{Bi2Se3} has a stable Sn-terminated surface. These
observations are supported by low energy electron diffraction (LEED)
intensity-voltage measurements and dynamical LEED calculations, which further
show that the Sn-terminated SnSe thin film has undergone a surface
structural relaxation of the interlayer spacing between the Sn and Se atomic
planes. In sharp contrast to the Se-terminated counterpart, the observed Dirac
surface state in the Sn-terminated SnSe thin film is shown to yield a
high Fermi velocity, m/s, which suggests a potential mechanism
of engineering the Dirac surface state of topological materials by tuning the
surface configuration.Comment: 12 pages, 13 figures, supplementary materials include
Substrate specificity of bacterial oligosaccharyltransferase suggests a common transfer mechanism for the bacterial and eukaryotic systems
The PgIB oligosaccharyltransferase (OTase) of Campylobacter jejuni can be functionally expressed in Escherichia coli, and its relaxed oligosaccharide substrate specificity allows the transfer of different glycans from the lipid carrier undecaprenyl pyrophosphate to an acceptor protein. To investigate the substrate specificity of PgIB, we tested the transfer of a set of lipid-linked polysaccharides in E. coli and Salmonella enterica serovar Typhimurium. A hexose linked to the C-6 of the monosaccharide at the reducing end did not inhibit the transfer of the O antigen to the acceptor protein. However, PgIB required an acetamido group at the C-2. A model for the mechanism of PgIB involving this functional group was proposed. Previous experiments have shown that eukaryotic OTases have the same requirement, suggesting that eukaryotic and prokaryotic OTases catalyze the transfer of oligosaccharides by a conserved mechanism. Moreover, we demonstrated the functional transfer of the C. jejuni glycosylation system into S. enterica. The elucidation of the mechanism of action and the substrate specificity of PgIB represents the foundation for engineering glycoproteins that will have an impact on biotechnology
Improved detectability of small-bowel lesions via capsule endoscopy with computed virtual chromoendoscopy: A pilot study
Objective. Real-time video capsule endoscopy (CE) with flexible spectral imaging color enhancement (FICE) improves visibility of small-bowel lesions. This article aims to clarify whether CE-FICE also improves detectability of small-bowel lesions. Patients and methods. A total of 55 patients who underwent CE at Hiroshima University Hospital during the period November 2009 through March 2010 were enrolled in the study. Five patients were excluded from the study because residues and transit delays prevented sufficient evaluation. Thus, 50 patients participated. Two experienced endoscopists (each having interpreted more than 50 capsule videos) analyzed the images. One interpreted conventional capsule videos; the other, blinded to interpretation of the conventional images, interpreted CE-FICE images obtained at settings 1-3 (setting 1: red 595 nm, green 540 nm, blue 535 nm; setting 2: red 420 nm, green 520 nm, blue 530 nm; setting 3: red 595 nm, green 570 nm, blue 415 nm). Lesions were classified as angioectasia, erosion, ulceration, or tumor. Detectability was compared between the two modalities. Time taken to interpret the capsule videos was also determined. Results. Seventeen angioectasias were identified by conventional CE; 48 were detected by CE-FICE at setting 1, 45 at setting 2, and 24 at setting 3, with significant differences at settings 1 and 2 (p = 0.0003, p < 0.0001, respectively). Detection of erosion, ulceration, and tumor did not differ statistically between conventional CE and CE-FICE, nor did interpretation time (conventional CE 36 ± 6.9 min; CE-FICE setting 1, 36 ± 6.4 min; setting 2, 38 ± 5.8 min; setting 3, 35 ± 6.7 min). Conclusions. CE-FICE is superior in the lesion detection in comparison with conventional CE and improves detection of angioectasia
Voltage-programmable liquid optical interface
Recently, there has been intense interest in photonic devices based on microfluidics, including displays and refractive tunable microlenses and optical beamsteerers, that work using the principle of electrowetting. Here, we report a novel approach to optical devices in which static wrinkles are produced at the surface of a thin film of oil as a result of dielectrophoretic forces. We have demonstrated this voltage-programmable surface wrinkling effect in periodic devices with pitch lengths of between 20 and 240 µm and with response times of less than 40 µs. By a careful choice of oils, it is possible to optimize either for high-amplitude sinusoidal wrinkles at micrometre-scale pitches or more complex non-sinusoidal profiles with higher Fourier components at longer pitches. This opens up the possibility of developing rapidly responsive voltage-programmable, polarization-insensitive transmission and reflection diffraction devices and arbitrary surface profile optical devices
Diffuse Gamma Rays: Galactic and Extragalactic Diffuse Emission
"Diffuse" gamma rays consist of several components: truly diffuse emission
from the interstellar medium, the extragalactic background, whose origin is not
firmly established yet, and the contribution from unresolved and faint Galactic
point sources. One approach to unravel these components is to study the diffuse
emission from the interstellar medium, which traces the interactions of high
energy particles with interstellar gas and radiation fields. Because of its
origin such emission is potentially able to reveal much about the sources and
propagation of cosmic rays. The extragalactic background, if reliably
determined, can be used in cosmological and blazar studies. Studying the
derived "average" spectrum of faint Galactic sources may be able to give a clue
to the nature of the emitting objects.Comment: 32 pages, 28 figures, kapproc.cls. Chapter to the book "Cosmic
Gamma-Ray Sources," to be published by Kluwer ASSL Series, Edited by K. S.
Cheng and G. E. Romero. More details can be found at
http://www.gamma.mpe-garching.mpg.de/~aws/aws.htm
Identification of interface structure for a topological CoS<sub>2</sub> single crystal in oxygen evolution reaction with high intrinsic reactivity
Transition metal chalcogenides such as CoS2 have been reported as competitive catalysts for oxygen evolution reaction. It has been well confirmed that surface modification is inevitable in such a process, with the formation of different re-constructed oxide layers. However, which oxide species should be responsible for the optimized catalytic efficiencies and the detailed interface structure between the modified layer and precatalyst remain controversial. Here, a topological CoS2 single crystal with a well-defined exposed surface is used as a model catalyst, which makes the direct investigation of the interface structure possible. Cross-sectional transmission electron microscopy of the sample reveals the formation of a 2 nm thickness Co3O4 layer that grows epitaxially on the CoS2 surface. Thick CoO pieces are also observed and are loosely attached to the bulk crystal. The compact Co3O4 interface structure can result in the fast electron transfer from adsorbed O species to the bulk crystal compared with CoO pieces as evidenced by the electrochemical impedance measurements. This leads to the competitive apparent and intrinsic reactivity of the crystal despite the low surface geometric area. These findings are helpful for the understanding of catalytic origins of transition metal chalcogenides and the designing of high-performance catalysts with interface-phase engineering
Sequential binding and sensing of Zn(II) by Bacillus subtilis Zur
Bacillus subtilis Zur (BsZur) represses high-affinity zinc-uptake systems and alternative ribosomal proteins in response to zinc replete conditions. Sequence alignments and structural studies of related Fur family proteins suggest that BsZur may contain three zinc-binding sites (sites 1–3). Mutational analyses confirm the essential structural role of site 1, while mutants affected in sites 2 and 3 retain partial repressor function. Purified BsZur binds a maximum of two Zn(II) per monomer at site 1 and site 2. Site 3 residues are important for dimerization, but do not directly bind Zn(II). Analyses of metal-binding affinities reveals negative cooperativity between the two site 2 binding events in each dimer. DNA-binding studies indicate that BsZur is sequentially activated from an inactive dimer (Zur2:Zn2) to a partially active asymmetric dimer (Zur2:Zn3), and finally to the fully zinc-loaded active form (Zur2:Zn4). BsZur with a C84S mutation in site 2 forms a Zur2:Zn3 form with normal metal- and DNA-binding affinities but is impaired in formation of the Zur2:Zn4 high affinity DNA-binding state. This mutant retains partial repressor activity in vivo, thereby supporting a model in which stepwise activation by zinc serves to broaden the physiological response to a wider range of metal concentrations
A new subspace method for blind estimation of selective MIMO-STBC channels
In this paper, a new technique for the blind estimation of frequency and/or time-selective multiple-input multiple-output (MIMO) channels under space-time block coding (STBC) transmissions is presented. The proposed method relies on a basis expansion model (BEM) of the MIMO channel, which reduces the number of parameters to be estimated, and includes many practical STBC-based transmission scenarios, such as STBC-orthogonal frequency division multiplexing (OFDM), space-frequency block coding (SFBC), time-reversal STBC, and time-varying STBC encoded systems. Inspired by the unconstrained blind maximum likelihood (UML) decoder, the proposed criterion is a subspace method that efficiently exploits all the information provided by the STBC structure, as well as by the reduced-rank representation of the MIMO channel. The method, which is independent of the specific signal constellation, is able to blindly recover the MIMO channel within a small number of available blocks at the receiver side. In fact, for some particular cases of interest such as orthogonal STBC-OFDM schemes, the proposed technique blindly identifies the channel using just one data block. The complexity of the proposed approach reduces to the solution of a generalized eigenvalue (GEV) problem and its computational cost is linear in the number of sub-channels. An identifiability analysis and some numerical examples illustrating the performance of the proposed algorithm are also providedThis work was supported by the Spanish Government under projects TEC2007-68020-C04-02/TCM (MultiMIMO) and CONSOLIDER-INGENIO 2010 CSD2008-00010 (COMONSENS)
- …