A numerical study of squeeze-film damping in MEMS-based structures including rarefaction effects

In a variety of MEMS applications, the thin film of fluid responsible of squeeze-film dampingresults to be rarefied and, thus, not suitable to be modeled though the classical Navier-Stokes equation. Thesimplest way to consider fluid rarefaction is the introduction of a slight modification into its ordinaryformulation, by substituting the standard fluid viscosity with an effective viscosity term. In the present paper,some squeeze-film damping problems of both parallel and torsion plates at decreasing pressure are studied bynumerical solving a full 3D Navier-Stokes equation, where the effective viscosity is computed according toproper expressions already included in the literature. Furthermore, the same expressions for the effectiveviscosity are implemented within known analytical models, still derived from the Navier-Stokes equation. In allthe considered cases, the numerical results are shown to be very promising, providing comparable or evenbetter agreement with the experimental data than the corresponding analytical results, even at low air pressure.Thus, unlike what is usually agreed in the literature, the effective viscosity approach can be efficiently applied atlow pressure regimes, especially when this is combined with a finite element analysis (FE

A numerical study of squeeze-film damping in MEMS-based structures including rarefaction effects

In a variety of MEMS applications, the thin film of fluid responsible of squeeze-film damping results to be rarefied and, thus, not suitable to be modeled though the classical Navier-Stokes equation. The simplest way to consider fluid rarefaction is the introduction of a slight modification into its ordinary formulation, by substituting the standard fluid viscosity with an effective viscosity term. In the present paper, some squeeze-film damping problems of both parallel and torsion plates at decreasing pressure are studied by numerical solving a full 3D Navier-Stokes equation, where the effective viscosity is computed according to proper expressions already included in the literature. Furthermore, the same expressions for the effective viscosity are implemented within known analytical models, still derived from the Navier-Stokes equation. In all the considered cases, the numerical results are shown to be very promising, providing comparable or even better agreement with the experimental data than the corresponding analytical results, even at low air pressure. Thus, unlike what is usually agreed in the literature, the effective viscosity approach can be efficiently applied at low pressure regimes, especially when this is combined with a finite element analysis (FE

Relationship between prolactin plasma levels and white matter volume in women with multiple sclerosis

BACKGROUND: The role of prolactin (PRL) on tissue injury and repair mechanisms in multiple sclerosis (MS) remains unclear. The aim of this work was to investigate the relationship between PRL plasma levels and brain damage as measured by magnetic resonance imaging (MRI). METHODS: We employed a chemiluminescence immunoassay for measuring plasma levels of PRL. We used a 1.5 T scanner to acquire images and Jim 4.0 and SIENAX software to analyse them. RESULTS: We included 106 women with relapsing remitting (RR) MS and stable disease in the last two months. There was no difference in PRL plasma levels between patients with and without gadolinium enhancement on MRI. PRL plasma levels correlated with white matter volume (WMV) (rho = 0.284, p = 0.014) but not with grey matter volume (GMV). Moreover, PRL levels predicted changes in WMV (Beta: 984, p = 0.034). CONCLUSIONS: Our data of a positive association between PRL serum levels and WMV support the role of PRL in promoting myelin repair as documented in animal models of demyelination. The lack of an increase of PRL in the presence of gadolinium enhancement, contrasts with the view considering this hormone as an immune-stimulating and detrimental factor in the inflammatory process associated with MS

Doubling the Mechanical Properties of Spider Silk by C60 Supersonic Molecular Beam Epitaxy

Spider silk is one of the most fascinating natural materials, owing to its outstanding mechanical properties. In fact, it is able to combine usually self-excluding properties, like strength and toughness that synthetic fibers fail to replicate. Here, we report a method to further enhance the already excellent mechanical properties of spider's silk, producing nanocomposite fibers where the matrix of spider silk is reinforced with C60 molecules. These are deposited by Supersonic Molecular Beam Epitaxy (SuMBE) and are able to efficiently interact with silk, as evidenced by XPS analysis. As a consequence, upon proper adjustment of the fullerene kinetic energy, the treated fibers show improved strength, Young's modulus and toughness

Supercritical CO2 for the drying and microbial inactivation of apple's slices

Supercritical CO2 (Sc-CO2) drying has been recognized as a promising low temperature drying technique for food products. In this regard, this work focuses on the feasibility of Sc-CO2 drying of apple’s slices: both the microbiological stability and mechanical behavior of the test product after the process have been investigated in dependence from different process parameters, namely drying time, pressurization time, and depressurization time. The microbiological stability was determined for both inoculated pathogenic bacteria (Escherichia coli O157:H7, Salmonella, and Listeria monocytogenes) and naturally present microorganisms (yeasts and molds, mesophilic bacteria and spores and Enterobacteriaceae). Results demonstrated a complete inactivation of pathogenic bacteria under the detection limit (<1 CFU/g) just after the pressurization (10 min) and depressurization (20 min) phases. After the same steps, a strong reduction of vegetative bacteria and yeasts and molds was also observed in comparison with air drying and freeze drying samples. As regards the mechanical behavior, the Young Modulus, measured before and after the CO2 processes to provide a measurement of samples’ stiffness, resulted dependent from the final water activity, but independent from the length of pressurization and depressurization phases at longer drying time. Overall, these results are promising to foster the development of the technology at industrial level

Strain-Induced Plasmon Confinement in Polycrystalline Graphene

Terahertz spectroscopy is a perfect tool to investigate the electronic intraband conductivity of graphene, but a phenom-enological model (Drude-Smith) is often needed to describe disorder. By studying the THz response of isotropically strained polycrystalline graphene and using a fully atomistic computational approach to fit the results, we demonstrate here the connection between the Drude-Smith parameters and the microscopic behavior. Importantly, we clearly show that the strain-induced changes in the conductivity originate mainly from the increased separation between the single-crystal grains, leading to enchanced localization of the plasmon excitations. Only at the lowest strain values explored, a behavior consistent with the deformation of the individual grains can instead be observed

Free-standing graphene oxide and carbon nanotube hybrid papers with enhanced electrical and mechanic performance and their synergy in polymer laminates

Hybrid nanomaterials fabricated by the heterogeneous integration of 1D (carbon nanotubes) and 2D (graphene oxide) nanomaterials showed synergy in electrical and mechanical properties. Here, we reported the infiltration of carboxylic functionalized single-walled carbon nanotubes (C-SWNT) into free-standing graphene oxide (GO) paper for better electrical and mechanical properties than native GO. The stacking arrangement of GO sheets and its alteration in the presence of C-SWNT were comprehensively explored through scanning electron microscopy, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction. The C-SWNTs bridges between different GO sheets produce a pathway for the flow of electrical charges and provide a tougher hybrid system. The nanoscopic surface potential map reveals a higher work function of the individual functionalised SWNTs than surrounded GO sheets showing efficient charge exchange. We observed the enhanced conductivity up to 50 times and capacitance up to 3.5 times of the hybrid structure than the GO-paper. The laminate of polystyrene composites provided higher elastic modulus and mechanical strength when hybrid paper is used, thus paving the way for the exploitation of hybrid filler formulation in designing polymer composites

Challenges in Ceramic Science: A Report from the Workshop on Emerging Research Areas in Ceramic Science

In March 2012, a group of researchers met to discuss emerging topics in ceramic science and to identify grand challenges in the field. By the end of the workshop, the group reached a consensus on eight challenges for the future:—understanding rare events in ceramic microstructures, understanding the phase-like behavior of interfaces, predicting and controlling heterogeneous microstructures with unprecedented functionalities, controlling the properties of oxide electronics, understanding defects in the vicinity of interfaces, controlling ceramics far from equilibrium, accelerating the development of new ceramic materials, and harnessing order within disorder in glasses. This paper reports the outcomes of the workshop and provides descriptions of these challenges

CMS physics technical design report : Addendum on high density QCD with heavy ions

Peer reviewe